9 Aug
2009
9 Aug
'09
2:54 p.m.
Hi List,
how can i tell aplay to use just single channel(s) of my HDSP card?
When doing:
aplay -D default:Card=DSP file.wav
i get playback on all 18 channels.
any help is appreciated!
Peter
9 Aug
9 Aug
4:50 p.m.
On Sun, Aug 9, 2009 at 12:52 PM, Peter Plessas<plessas(a)mur.at> wrote:
Hi List,
how can i tell aplay to use just single channel(s) of my HDSP card?
When doing:
aplay -D default:Card=DSP file.wav
i get playback on all 18 channels.
any help is appreciated!
you would need an ~/.asoundrc file that defines a "route" "plugin
device" that explicitly has only 1 (or 2) channels that are mapped to
the relevant channels of the real card. i'm afraid i don't have the
time or memory to provide an example - google will help, for sure..
then tell aplay to use that device instead of "default:Card=DSP"
5 p.m.
Paul Davis wrote:
On Sun, Aug 9, 2009 at 12:52 PM, Peter
Plessas<plessas(a)mur.at> wrote:
thank
you Paul! I will try that as option! Do you think there is any cpu
, memory or latency overhead when using a "route" plugin?
cheers,
Peter
Hi List,
how can i tell aplay to use just single channel(s) of my HDSP card?
When doing:
aplay -D default:Card=DSP file.wav
i get playback on all 18 channels.
any help is appreciated!
you would need an ~/.asoundrc file that defines a "route" "plugin
device" that explicitly has only 1 (or 2) channels that are mapped to
the relevant channels of the real card. i'm afraid i don't have the
time or memory to provide an example - google will help, for sure..
then tell aplay to use that device instead of "default:Card=DSP" 
6:03 p.m.
On Sun, Aug 9, 2009 at 12:52 PM, Peter Plessas<plessas(a)mur.at> wrote:
>> Hi List,
>>
>> how can i tell aplay to use just single channel(s) of my HDSP card?
>> When doing:
>> aplay -D default:Card=DSP file.wav
>> i get playback on all 18 channels.
>>
>> any help is appreciated!
I'm not sure if this can help but I found this some time ago. At the bottom of
the page there is a .asoundrc that might help. It's the "separate outputs".
http://alsa.opensrc.org/index.php/Talk:.asoundrc
/bengan
10 Aug
10 Aug
11:09 a.m.
Hi,
here is a copy of my ".asoundrc":
pcm.!default {
type plug
# slave { pcm "hw:Digi968,0" }
slave { pcm "hw:DSP" }
# route_policy duplicate
route_policy copy
}
Switching 'route_policy' from 'duplicate' to 'copy' keeps only a
single
output (channel 1) for a single channel aplay input file. Now you can
use the hdspmixer (or amixer in scripts) to route the first output to
any channel. Here is a sniplet from my /etc/rc.local:
/usr/bin/amixer -q -D hw:DSP cset numid=5 26,24,32768
/usr/bin/amixer -q -D hw:DSP cset numid=5 27,25,32768
/usr/bin/amixer -q -D hw:DSP cset numid=5 26,0,32768
/usr/bin/amixer -q -D hw:DSP cset numid=5 27,1,32768
This routes the first two software output channels to ADAT1 out1+2 and
SPDIF on my HDSP9652.
I hope this helps.
Giso
Paul Davis wrote:
On Sun, Aug 9, 2009 at 12:52 PM, Peter
Plessas<plessas(a)mur.at> wrote:
Hi List,
how can i tell aplay to use just single channel(s) of my HDSP card?
When doing:
aplay -D default:Card=DSP file.wav
i get playback on all 18 channels.
any help is appreciated!
you would need an ~/.asoundrc file that defines a "route" "plugin
device" that explicitly has only 1 (or 2) channels that are mapped to
the relevant channels of the real card. i'm afraid i don't have the
time or memory to provide an example - google will help, for sure..
then tell aplay to use that device instead of "default:Card=DSP"
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
5588
days inactive
5589
days old
linux-audio-user@lists.linuxaudio.org
4 comments
4 participants
participants (4)
-
Bengt Gördén -
Giso Grimm -
Paul Davis -
Peter Plessas