27 Mar
2008
27 Mar
'08
11:31 p.m.
Hi People,
I'm thinking of getting one of the Saffire audio interfaces from
Focusrite. Anyone on the list using these units & happy with the
results? This, a little off-topic & subjective: happy with the pres &
conversion?
The SaffireLE,
http://www.focusrite.com/products/saffire/saffire_le/
, is the one I'm eyeing. As far as I can tell it's very similar to the
Saffire,
http://www.focusrite.com/products/saffire/saffire/
, only with 6 in/8 out compared to 4 in/10 out, & minus the
hardwar-powered plug-ins. I like having 2 more ins, & wont miss 2 less
outs. & I imagined the plug-ins, ahreware-powered or software woulkd be
useless under Linux. But the recent thread on the M-Audio Profire 2626
leads me to believe, maybe the times are changing.
I'm curious whether the DSP plugins might work in linux with FFADO.
Actually, true functionality of any of these models seem to require
software to adjust settings, so, what limitations are people noticing
right now running these in Linux? & will the pending beta release of
FFADO address the Saffire plug-in Suite hardware-powered use & whatever
other issues there are, if there are? Or is this a Wine solution?
Last, is anyone working on a clone of Pieter Palmers? That'd be pretty
useful...
28 Mar
28 Mar
6:49 a.m.
sevol wrote:
Hi People,
I'm thinking of getting one of the Saffire audio interfaces from
Focusrite. Anyone on the list using these units & happy with the
results? This, a little off-topic & subjective: happy with the pres &
conversion?
The SaffireLE,
http://www.focusrite.com/products/saffire/saffire_le/
, is the one I'm eyeing. As far as I can tell it's very similar to the
Saffire,
http://www.focusrite.com/products/saffire/saffire/
, only with 6 in/8 out compared to 4 in/10 out, & minus the
hardwar-powered plug-ins. I like having 2 more ins, & wont miss 2 less
outs. & I imagined the plug-ins, ahreware-powered or software woulkd be
useless under Linux. But the recent thread on the M-Audio Profire 2626
leads me to believe, maybe the times are changing.
I personally think times are
changing, but change is slow...
I'm curious whether the DSP plugins might work in linux with FFADO.
Actually, true functionality of any of these models seem to require
software to adjust settings, so, what limitations are people noticing
right now running these in Linux? & will the pending beta release of
FFADO address the Saffire plug-in Suite hardware-powered use & whatever
other issues there are, if there are? Or is this a Wine solution?
As things stand
now, there are no plans to support the saffire's
internal plugins. And if I do support for any (hardware or software)
plugins related to these devices, I'll do whatever I can to make them
native instead of WINE.
Last, is anyone working on a clone of Pieter Palmers? That'd be pretty
useful...
I am. Still have about 30years of tweaking ahead though :).
Pieter
29 Mar
29 Mar
7:59 a.m.
Pieter Palmers wrote:
Ahh, then the rumors ARE true... had to ask, but 30yrs wait time ;)
sevol wrote:
I'm not really disappointed - hadn't given the DSP stuff much chance of
use atm. If/When the time comes, native has got to be better.
Somehow the plugins thing hijacked my thoughts. In fact, certain other
issues seem more critical & pressing. Like, the front on the LE has 4
nice knobs: 2 level controls for frontside inputs 1 & 2; 1 for levels of
backside Main outs 1 & 2; & 1 for headphone levels. That seems to leave
a lot of input & output control unaccounted for, except via the Saffire
Control LE software GUI.
& this would be a no-show in Linux, right? I guess the 2 analogue
line/instrument-in levels on back can be controllrd by, if existant,
volume knobs on whatever devices are connecting to them. So, maybe
that's covered. & sample rates will probably be handled by JACK/JACKCTRL.
Then though, the MIDI Through is activated by a software switch. & the
High Gain switches for Instrument level sources is software controlled.
The S/PDIF external sync switch, likewise, & the same situation as the
nonworking S/PDIF input of the Firepod. A lot of the output & mixing
capabilities are based in software too. Is there going to be a way to
manage these? Full details not necessary, but could you reveal the gist
of what'll be lost?
Hi People,
I'm thinking of getting one of the Saffire audio interfaces from
Focusrite. Anyone on the list using these units & happy with the
results? This, a little off-topic & subjective: happy with the pres &
conversion?
The SaffireLE,
http://www.focusrite.com/products/saffire/saffire_le/
, is the one I'm eyeing. As far as I can tell it's very similar to the
Saffire,
http://www.focusrite.com/products/saffire/saffire/
, only with 6 in/8 out compared to 4 in/10 out, & minus the
hardwar-powered plug-ins. I like having 2 more ins, & wont miss 2 less
outs. & I imagined the plug-ins, ahreware-powered or software woulkd
be useless under Linux. But the recent thread on the M-Audio Profire
2626 leads me to believe, maybe the times are changing.
I personally think times
are changing, but change is slow...
I'm curious whether the DSP plugins might work in linux with FFADO.
Actually, true functionality of any of these models seem to require
software to adjust settings, so, what limitations are people noticing
right now running these in Linux? & will the pending beta release of
FFADO address the Saffire plug-in Suite hardware-powered use &
whatever other issues there are, if there are? Or is this a Wine
solution?
As things stand now, there are no plans to support the saffire's
internal plugins. And if I do support for any (hardware or software)
plugins related to these devices, I'll do whatever I can to make them
native instead of WINE.
Last, is anyone working on a clone of Pieter Palmers? That'd be pretty
useful...
I am. Still have about 30years of tweaking ahead though :).
Pieter
Thanks for the info,
sevol
p.s. Just read Andrew's message on the Freebob-devel list & see that
the S/PDIF capabilities are looking better, at least with FFADO testing
on the firepod. Hmmm...
10:45 a.m.
sevol wrote:
Ahh, then the rumors ARE true... had to ask, but 30yrs wait time ;) Technically I
guess it's not really a clone though... I'm afraid it's
going to be only a 50% genetic match. And as you might know that can
make a huge difference :).
S/PDIF on the firepod should work when using FFADO. You can even install
FFADO only for it's device control capabilities (clock source, mixer
settings) and then run jack with the freebob backend for stable streaming.
Greets,
Pieter
Pieter Palmers wrote:
All input/output gain controls and configuration switches that are
provided by the saffire control panel on other OS'es are supported in
the FFADO codebase. We have control panels for all of the Saffire
devices, and they are fully featured (except for the DSP stuff on the
saffire white). There might be some bugs in them, but we have all info
to fix them. The only thing you shouldn't expect is a fancy GUI... it's
all very basic PyQT rapid prototyping stuff, but it works. If someone
wants to tackle the GUI side of things, please do. The current prototype
gui's illustrate how to use the control interface.
sevol wrote:
I'm not really disappointed - hadn't given the DSP stuff much chance of
use atm. If/When the time comes, native has got to be better.
Somehow the plugins thing hijacked my thoughts. In fact, certain other
issues seem more critical & pressing. Like, the front on the LE has 4
nice knobs: 2 level controls for frontside inputs 1 & 2; 1 for levels of
backside Main outs 1 & 2; & 1 for headphone levels. That seems to leave
a lot of input & output control unaccounted for, except via the Saffire
Control LE software GUI.
& this would be a no-show in Linux, right? I guess the 2 analogue
line/instrument-in levels on back can be controllrd by, if existant,
volume knobs on whatever devices are connecting to them. So, maybe
that's covered. & sample rates will probably be handled by JACK/JACKCTRL.
Then though, the MIDI Through is activated by a software switch. & the
High Gain switches for Instrument level sources is software controlled.
The S/PDIF external sync switch, likewise, & the same situation as the
nonworking S/PDIF input of the Firepod. A lot of the output & mixing
capabilities are based in software too. Is there going to be a way to
manage these? Full details not necessary, but could you reveal the gist
of what'll be lost? Hi People,
I'm thinking of getting one of the Saffire audio interfaces from
Focusrite. Anyone on the list using these units & happy with the
results? This, a little off-topic & subjective: happy with the pres &
conversion?
The SaffireLE,
http://www.focusrite.com/products/saffire/saffire_le/
, is the one I'm eyeing. As far as I can tell it's very similar to the
Saffire,
http://www.focusrite.com/products/saffire/saffire/
, only with 6 in/8 out compared to 4 in/10 out, & minus the
hardwar-powered plug-ins. I like having 2 more ins, & wont miss 2 less
outs. & I imagined the plug-ins, ahreware-powered or software woulkd
be useless under Linux. But the recent thread on the M-Audio Profire
2626 leads me to believe, maybe the times are changing.
I personally think times
are changing, but change is slow...
I'm curious whether the DSP plugins might
work in linux with FFADO.
Actually, true functionality of any of these models seem to require
software to adjust settings, so, what limitations are people noticing
right now running these in Linux? & will the pending beta release of
FFADO address the Saffire plug-in Suite hardware-powered use &
whatever other issues there are, if there are? Or is this a Wine
solution?
As things stand now, there are no plans to support the saffire's
internal plugins. And if I do support for any (hardware or software)
plugins related to these devices, I'll do whatever I can to make them
native instead of WINE. Last, is anyone working on a clone of Pieter Palmers?
That'd be pretty
useful...
I am. Still have about 30years of tweaking ahead though :). Pieter
Thanks for the info,
sevol
p.s. Just read Andrew's message on the Freebob-devel list & see that
the S/PDIF capabilities are looking better, at least with FFADO testing
on the firepod. Hmmm... 
3:47 p.m.
Am Samstag, 29. März 2008 schrieb Pieter Palmers:
sevol wrote:
I am happy when my "clone" is able to carry cables from FOH to the stage ;-)
@Pieter: Congrats!
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a "rm -rf /". Or ask your
administrator to do so...
Pieter Palmers wrote:
Technically I guess
it's not really a clone though... I'm afraid it's
going to be only a 50% genetic match. And as you might know that can
make a huge difference :). sevol wrote:
Ahh,
then the rumors ARE true... had to ask, but 30yrs wait time ;) Last, is anyone working on a clone of Pieter
Palmers? That'd be pretty
useful...
I am. Still have about 30years of tweaking ahead though :).
5:37 p.m.
Arnold Krille wrote:
Am Samstag, 29. März 2008 schrieb Pieter Palmers:
Ho boy... Don't jump to conclusions :)
My current motto is "Practice makes perfect".
Greets,
Pieter
sevol wrote:
I am happy when my "clone" is able to carry cables from FOH to the stage ;-)
@Pieter: Congrats! Pieter Palmers wrote:
Technically I guess it's not
really a clone though... I'm afraid it's
going to be only a 50% genetic match. And as you might know that can
make a huge difference :). sevol wrote:
> Last, is anyone working on a clone of Pieter Palmers? That'd be pretty
> useful...
I am. Still have about 30years of tweaking ahead though :).
Ahh, then the rumors
ARE true... had to ask, but 30yrs wait time ;)
31 Mar
31 Mar
6:30 a.m.
Pieter Palmers wrote:
Ahh, then the rumors ARE true... had to ask, but 30yrs wait time ;) Technically I
guess it's not really a clone though... I'm afraid it's
going to be only a 50% genetic match. And as you might know that can
make a huge difference :).
I will have to give that a try :)
S/PDIF on the firepod should work when using FFADO. You can even install
FFADO only for it's device control capabilities (clock source, mixer
settings) and then run jack with the freebob backend for stable streaming.
Sorry, I was thinking out loud. S/PDIF - even FFADO - is beside the
point re my pod. The sync light glow's blue, never changes & syncs to
nothing. Use to sync up every 10th or 50th power cycle & stay a while,
but those days are gone. As an interface it's worthless.
Perhaps it's just as well, my knowledge of linux is straight up flimzy.
The only thing I 1/2-way understand is the pod problem.
sevol wrote:
Excellent! This is great news & really better than hoped, even counting
Focurite's full support. I'll take this chance & congradulate you early
on these non-GMO babies, whatever the due date :) Hope the Mackie, Echo,
& other vendor supported stuff is working out too.
Pieter Palmers wrote:
All input/output gain controls and configuration switches that are
provided by the saffire control panel on other OS'es are supported in
the FFADO codebase. We have control panels for all of the Saffire
devices, and they are fully featured (except for the DSP stuff on the
saffire white). There might be some bugs in them, but we have all info
to fix them. The only thing you shouldn't expect is a fancy GUI... it's
all very basic PyQT rapid prototyping stuff, but it works. If someone
wants to tackle the GUI side of things, please do. The current prototype
gui's illustrate how to use the control interface.
sevol wrote:
I'm not really disappointed - hadn't given the DSP stuff much chance
of use atm. If/When the time comes, native has got to be better.
Somehow the plugins thing hijacked my thoughts. In fact, certain other
issues seem more critical & pressing. Like, the front on the LE has 4
nice knobs: 2 level controls for frontside inputs 1 & 2; 1 for levels
of backside Main outs 1 & 2; & 1 for headphone levels. That seems to
leave a lot of input & output control unaccounted for, except via the
Saffire Control LE software GUI.
& this would be a no-show in Linux, right? I guess the 2 analogue
line/instrument-in levels on back can be controllrd by, if existant,
volume knobs on whatever devices are connecting to them. So, maybe
that's covered. & sample rates will probably be handled by JACK/JACKCTRL.
Then though, the MIDI Through is activated by a software switch. & the
High Gain switches for Instrument level sources is software
controlled. The S/PDIF external sync switch, likewise, & the same
situation as the nonworking S/PDIF input of the Firepod. A lot of the
output & mixing capabilities are based in software too. Is there going
to be a way to manage these? Full details not necessary, but could you
reveal the gist of what'll be lost? Hi People,
I'm thinking of getting one of the Saffire audio interfaces from
Focusrite. Anyone on the list using these units & happy with the
results? This, a little off-topic & subjective: happy with the pres
& conversion?
The SaffireLE,
http://www.focusrite.com/products/saffire/saffire_le/
, is the one I'm eyeing. As far as I can tell it's very similar to
the Saffire,
http://www.focusrite.com/products/saffire/saffire/
, only with 6 in/8 out compared to 4 in/10 out, & minus the
hardwar-powered plug-ins. I like having 2 more ins, & wont miss 2
less outs. & I imagined the plug-ins, ahreware-powered or software
woulkd be useless under Linux. But the recent thread on the M-Audio
Profire 2626 leads me to believe, maybe the times are changing.
I personally think
times are changing, but change is slow...
I'm curious whether the DSP plugins might
work in linux with FFADO.
Actually, true functionality of any of these models seem to require
software to adjust settings, so, what limitations are people
noticing right now running these in Linux? & will the pending beta
release of FFADO address the Saffire plug-in Suite hardware-powered
use & whatever other issues there are, if there are? Or is this a
Wine solution?
As things stand now, there are no plans to support the
saffire's
internal plugins. And if I do support for any (hardware or software)
plugins related to these devices, I'll do whatever I can to make them
native instead of WINE. Last, is
anyone working on a clone of Pieter Palmers? That'd be
pretty useful...
I am. Still have about 30years of tweaking ahead though :).
Pieter
Thanks for the info,
sevol
p.s. Just read Andrew's message on the Freebob-devel list & see that
the S/PDIF capabilities are looking better, at least with FFADO
testing on the firepod. Hmmm... Greets,
Pieter
best of luck,
sevol
6:42 a.m.
sevol wrote:
Sorry, I was thinking out loud. S/PDIF - even FFADO - is beside the
point re my pod. The sync light glow's blue, never changes & syncs to
nothing. Use to sync up every 10th or 50th power cycle & stay a while,
but those days are gone. As an interface it's worthless.
Perhaps it's just as well, my knowledge of linux is straight up flimzy.
The only thing I 1/2-way understand is the pod problem. As far as I can tell, the
firepod should work with FFADO (although not
vendor supported). But if I remember correctly you said that it also
doesn't work on windows. Linux is great, but don't expect miraculous
hardware repairs from it...
Greets,
Pieter
Pieter Palmers wrote:
All devices that are currently vendor supported have approximately the
same level of functionality in FFADO, which basically comes down to
"everything from other OS's except onboard DSP and maybe some consumer
features (most notably AC3 passthrough)".
sevol wrote:
Excellent! This is great news & really better than hoped, even counting
Focurite's full support. I'll take this chance & congradulate you early
on these non-GMO babies, whatever the due date :) Hope the Mackie, Echo,
& other vendor supported stuff is working out too. Pieter Palmers wrote:
All input/output gain controls and
configuration switches that are
provided by the saffire control panel on other OS'es are supported in
the FFADO codebase. We have control panels for all of the Saffire
devices, and they are fully featured (except for the DSP stuff on the
saffire white). There might be some bugs in them, but we have all info
to fix them. The only thing you shouldn't expect is a fancy GUI... it's
all very basic PyQT rapid prototyping stuff, but it works. If someone
wants to tackle the GUI side of things, please do. The current prototype
gui's illustrate how to use the control interface.
sevol wrote:
> Hi People,
>
> I'm thinking of getting one of the Saffire audio interfaces from
> Focusrite. Anyone on the list using these units & happy with the
> results? This, a little off-topic & subjective: happy with the pres
> & conversion?
>
> The SaffireLE,
>
> http://www.focusrite.com/products/saffire/saffire_le/
>
> , is the one I'm eyeing. As far as I can tell it's very similar to
> the Saffire,
>
> http://www.focusrite.com/products/saffire/saffire/
>
> , only with 6 in/8 out compared to 4 in/10 out, & minus the
> hardwar-powered plug-ins. I like having 2 more ins, & wont miss 2
> less outs. & I imagined the plug-ins, ahreware-powered or software
> woulkd be useless under Linux. But the recent thread on the M-Audio
> Profire 2626 leads me to believe, maybe the times are changing.
I personally think times are changing, but change is slow...
> I'm curious whether the DSP plugins might work in linux with FFADO.
> Actually, true functionality of any of these models seem to require
> software to adjust settings, so, what limitations are people
> noticing right now running these in Linux? & will the pending beta
> release of FFADO address the Saffire plug-in Suite hardware-powered
> use & whatever other issues there are, if there are? Or is this a
> Wine solution?
As things stand now, there are no plans to support the saffire's
internal plugins. And if I do support for any (hardware or software)
plugins related to these devices, I'll do whatever I can to make them
native instead of WINE.
I'm not really disappointed - hadn't given the DSP
stuff much chance
of use atm. If/When the time comes, native has got to be better.
Somehow the plugins thing hijacked my thoughts. In fact, certain other
issues seem more critical & pressing. Like, the front on the LE has 4
nice knobs: 2 level controls for frontside inputs 1 & 2; 1 for levels
of backside Main outs 1 & 2; & 1 for headphone levels. That seems to
leave a lot of input & output control unaccounted for, except via the
Saffire Control LE software GUI.
& this would be a no-show in Linux, right? I guess the 2 analogue
line/instrument-in levels on back can be controllrd by, if existant,
volume knobs on whatever devices are connecting to them. So, maybe
that's covered. & sample rates will probably be handled by JACK/JACKCTRL.
Then though, the MIDI Through is activated by a software switch. & the
High Gain switches for Instrument level sources is software
controlled. The S/PDIF external sync switch, likewise, & the same
situation as the nonworking S/PDIF input of the Firepod. A lot of the
output & mixing capabilities are based in software too. Is there going
to be a way to manage these? Full details not necessary, but could you
reveal the gist of what'll be lost?
p.s. Just read Andrew's message on the Freebob-devel list & see that
the S/PDIF capabilities are looking better, at least with FFADO
testing on the firepod. Hmmm...
S/PDIF on the firepod should work when using
FFADO. You can even install
FFADO only for it's device control capabilities (clock source, mixer
settings) and then run jack with the freebob backend for stable streaming.
2 Apr
2 Apr
2:34 a.m.
Pieter Palmers wrote:
Sorry, I was thinking out loud. S/PDIF - even FFADO - is beside the
point re my pod. The sync light glow's blue, never changes & syncs to
nothing. Use to sync up every 10th or 50th power cycle & stay a while,
but those days are gone. As an interface it's worthless.
Perhaps it's just as well, my knowledge of linux is straight up
flimzy. The only thing I 1/2-way understand is the pod problem. As far as I can
tell, the firepod should work with FFADO (although not
vendor supported). But if I remember correctly you said that it also
doesn't work on windows. Linux is great, but don't expect miraculous
hardware repairs from it...
Correct. If only I'd know that *before* my pod's warranty dried up? :)
BAck to the Saffire LE, I only wish it came in a rack-mountable design.
But guess Linux can't change that either. :)
sevol wrote:
Nice! More choices. Yesterday, I went to a local shop. Unfortunately, no
Focusrite gear. Their Mackie Onyx 1220 mixer looked sweet - bristling
with knobs, buttons, & faders! - more than my style & budget demands
though. Their stock of Linux compatible firewire interfaces equaled the
number of left-hand guitars on hand. One for one :)
Earlier today online, I ordered a LE.
Pieter Palmers wrote:
All devices that are currently vendor supported have approximately the
same level of functionality in FFADO, which basically comes down to
"everything from other OS's except onboard DSP and maybe some consumer
features (most notably AC3 passthrough)".
sevol wrote:
Excellent! This is great news & really better than hoped, even
counting Focurite's full support. I'll take this chance & congradulate
you early on these non-GMO babies, whatever the due date :) Hope the
Mackie, Echo, & other vendor supported stuff is working out too. Pieter Palmers wrote:
> sevol wrote:
>> Hi People,
>>
>> I'm thinking of getting one of the Saffire audio interfaces from
>> Focusrite. Anyone on the list using these units & happy with the
>> results? This, a little off-topic & subjective: happy with the
>> pres & conversion?
>>
>> The SaffireLE,
>>
>> http://www.focusrite.com/products/saffire/saffire_le/
>>
>> , is the one I'm eyeing. As far as I can tell it's very similar to
>> the Saffire,
>>
>> http://www.focusrite.com/products/saffire/saffire/
>>
>> , only with 6 in/8 out compared to 4 in/10 out, & minus the
>> hardwar-powered plug-ins. I like having 2 more ins, & wont miss 2
>> less outs. & I imagined the plug-ins, ahreware-powered or software
>> woulkd be useless under Linux. But the recent thread on the
>> M-Audio Profire 2626 leads me to believe, maybe the times are
>> changing.
> I personally think times are changing, but change is slow...
>
>> I'm curious whether the DSP plugins might work in linux with
>> FFADO. Actually, true functionality of any of these models seem to
>> require software to adjust settings, so, what limitations are
>> people noticing right now running these in Linux? & will the
>> pending beta release of FFADO address the Saffire plug-in Suite
>> hardware-powered use & whatever other issues there are, if there
>> are? Or is this a Wine solution?
> As things stand now, there are no plans to support the saffire's
> internal plugins. And if I do support for any (hardware or
> software) plugins related to these devices, I'll do whatever I can
> to make them native instead of WINE.
I'm not really disappointed - hadn't given the DSP stuff much chance
of use atm. If/When the time comes, native has got to be better.
Somehow the plugins thing hijacked my thoughts. In fact, certain
other issues seem more critical & pressing. Like, the front on the
LE has 4 nice knobs: 2 level controls for frontside inputs 1 & 2; 1
for levels of backside Main outs 1 & 2; & 1 for headphone levels.
That seems to leave a lot of input & output control unaccounted for,
except via the Saffire Control LE software GUI.
& this would be a no-show in Linux, right? I guess the 2 analogue
line/instrument-in levels on back can be controllrd by, if existant,
volume knobs on whatever devices are connecting to them. So, maybe
that's covered. & sample rates will probably be handled by
JACK/JACKCTRL.
Then though, the MIDI Through is activated by a software switch. &
the High Gain switches for Instrument level sources is software
controlled. The S/PDIF external sync switch, likewise, & the same
situation as the nonworking S/PDIF input of the Firepod. A lot of
the output & mixing capabilities are based in software too. Is there
going to be a way to manage these? Full details not necessary, but
could you reveal the gist of what'll be lost?
All input/output gain controls
and configuration switches that are
provided by the saffire control panel on other OS'es are supported in
the FFADO codebase. We have control panels for all of the Saffire
devices, and they are fully featured (except for the DSP stuff on the
saffire white). There might be some bugs in them, but we have all
info to fix them. The only thing you shouldn't expect is a fancy
GUI... it's all very basic PyQT rapid prototyping stuff, but it
works. If someone wants to tackle the GUI side of things, please do.
The current prototype gui's illustrate how to use the control interface.
p.s. Just read Andrew's message on the Freebob-devel list & see
that the S/PDIF capabilities are looking better, at least with FFADO
testing on the firepod. Hmmm...
S/PDIF on the firepod should work when using
FFADO. You can even
install FFADO only for it's device control capabilities (clock
source, mixer settings) and then run jack with the freebob backend
for stable streaming.
Greets,
Pieter
Pieter, I see your announcement for FreeBoB 1.0.10. You've been busy, &
also, super informative & speedy with answers- 10,000 thanx!
sevol
5876
days inactive
5882
days old
linux-audio-user@lists.linuxaudio.org
8 comments
3 participants
participants (3)
-
Arnold Krille -
Pieter Palmers -
sevol