3 Jul
2007
3 Jul
'07
12:35 p.m.
Hi!
If I connect a midi-client to jack-midi and send midi-start, does this send
jack_transport start as well?
And the other way aroud, if some app send a jack_transport start, does this
send a midi-start to all connected midi-clients?
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
3 Jul
3 Jul
1:09 p.m.
On Tue, 2007-07-03 at 16:35 +0200, Julien Claassen wrote:
Hi!
If I connect a midi-client to jack-midi and send midi-start, does this send
jack_transport start as well?
And the other way aroud, if some app send a jack_transport start, does this
send a midi-start to all connected midi-clients?
no and no.
2:17 p.m.
In Jul 3 A.D. 2007 Paul Davis scripsit:
On Tue, 2007-07-03 at 16:35 +0200, Julien Claassen
wrote:
Pity! Can I circumvent this problem. Thig is I have the following: a
midi-sequencer, that only understands raw-midi, but could be connected to
virtual-midi card and I have jack-audio client. I want them to start
simultaneously on either midi-start or jack_transport start. Unfortunitely
ecasound sending midi-start doesn't really work on it.
Any ideas?
Kindest regards
Julien
Hi!
If I connect a midi-client to jack-midi and send midi-start, does this send
jack_transport start as well?
And the other way aroud, if some app send a jack_transport start, does this
send a midi-start to all connected midi-clients?
no and no.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-user
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
2:22 p.m.
On Tue, 2007-07-03 at 18:17 +0200, Julien Claassen wrote:
In Jul 3 A.D. 2007 Paul Davis scripsit:
you'd have to write a "bridge" JACK client that translates as best it
can between JACK transport state changes and some set of MIDI messages.
there is no broadcast facility in JACK either, so you have to manually
connect every receiving client that you want to see messages to the
"bridge" client.
--p
On Tue, 2007-07-03 at 16:35 +0200, Julien
Claassen wrote:
Pity! Can I circumvent this problem. Thig is I have the following: a
midi-sequencer, that only understands raw-midi, but could be connected to
virtual-midi card and I have jack-audio client. I want them to start
simultaneously on either midi-start or jack_transport start. Unfortunitely
ecasound sending midi-start doesn't really work on it. Hi!
If I connect a midi-client to jack-midi and send midi-start, does this send
jack_transport start as well?
And the other way aroud, if some app send a jack_transport start, does this
send a midi-start to all connected midi-clients?
no and no.
6:58 p.m.
In Jul 3 A.D. 2007 Paul Davis scripsit:
On Tue, 2007-07-03 at 18:17 +0200, Julien Claassen
wrote:
What about using Dmitry's alsasequencer bridge
client, or does it simply
connect the soundcards to the jackmidi-system?
Kindest regards
Julien
In Jul 3 A.D. 2007 Paul Davis scripsit:
you'd have to write a "bridge" JACK client that translates as best it
can between JACK transport state changes and some set of MIDI messages.
there is no broadcast facility in JACK either, so you have to manually
connect every receiving client that you want to see messages to the
"bridge" client. On Tue, 2007-07-03 at 16:35 +0200, Julien
Claassen wrote:
Pity! Can I circumvent this problem. Thig is I have the following: a
midi-sequencer, that only understands raw-midi, but could be connected to
virtual-midi card and I have jack-audio client. I want them to start
simultaneously on either midi-start or jack_transport start. Unfortunitely
ecasound sending midi-start doesn't really work on it. Hi!
If I connect a midi-client to jack-midi and send midi-start, does this send
jack_transport start as well?
And the other way aroud, if some app send a jack_transport start, does this
send a midi-start to all connected midi-clients?
no and no.
--p
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
4 Jul
4 Jul
8:04 a.m.
Julien Claassen <julien(a)c-lab.de> writes:
In Jul 3 A.D. 2007 Paul Davis scripsit:
You may found this useful:
http://apps.linuxaudio.org/apps/all/jackctlmmc
It allows controling jack transport with MIDI MMC messages.
--
Nedko Arnaudov
On Tue, 2007-07-03 at 16:35 +0200, Julien
Claassen wrote:
Pity! Can I circumvent this problem. Thig is I have the following: a
midi-sequencer, that only understands raw-midi, but could be connected to
virtual-midi card and I have jack-audio client. I want them to start
simultaneously on either midi-start or jack_transport start. Unfortunitely
ecasound sending midi-start doesn't really work on it.
Any ideas? Hi!
If I connect a midi-client to jack-midi and send midi-start, does this send
jack_transport start as well?
And the other way aroud, if some app send a jack_transport start, does this
send a midi-start to all connected midi-clients?
no and no.
6443
days inactive
6444
days old
linux-audio-user@lists.linuxaudio.org
6 comments
4 participants
participants (4)
-
Dmitry Baikov -
Julien Claassen -
Nedko Arnaudov -
Paul Davis