22 Aug
2003
22 Aug
'03
7:20 p.m.
Hi,
I have a problem to connect SpiralSynth to my external midi keyboard.
Maybe someone could help me.
I have edit the Spiralrc file in my home directory:
BufferSize = 512
FragSize = 256
FragCount = -1
Samplerate = 44100
WantMidi = 1
FilterGranularity = 50
Output = /dev/adsp
Midi = /dev/snd/midiC1D0
WantRealtimeOut = 1
KeyMap = zsxdcvgbhnjmq2w3er5t6y7ui9o0p[
Polyphony = 2
/dev/snd/midiC1D0 is my first virtual midiport
then I connect 72:0 to 80:2 (external keyboard) but I can't hear any sound
from Spiralsynth when I play on the keyboard.
Some ideas ?
My system is Suse 8.2
This is my midi setup
64:0 ES1371 ES1371
72:0 Virtual Raw MIDI 1-0 VirMIDI 1-0
73:0 Virtual Raw MIDI 1-1 VirMIDI 1-1
74:0 Virtual Raw MIDI 1-2 VirMIDI 1-2
75:0 Virtual Raw MIDI 1-3 VirMIDI 1-3
80:0 MidiSport 4x4 MidiSport 4x4 Port 0
80:1 MidiSport 4x4 MidiSport 4x4 Port 1
80:2 MidiSport 4x4 MidiSport 4x4 Port 2
80:3 MidiSport 4x4 MidiSport 4x4 Port 3
Thank you very much
Christian
25 Aug
25 Aug
7:58 a.m.
Christian Bunge wrote:
/dev/snd/midiC1D0 is my first virtual midiport
In theory, this is an internal file, and you are supposed to use
/dev/midi01 instead. In practice, it doesn't matter. :)
then I connect 72:0 to 80:2 (external keyboard) but I
can't hear any sound
from Spiralsynth when I play on the keyboard.
72:0 Virtual Raw MIDI 1-0 VirMIDI
1-0
80:2 MidiSport 4x4 MidiSport 4x4 Port 2
If you run "aconnect 72:0 80:2", all data written to /dev/midi01 will
be sent to the third output port of the 4x4. To send data in the other
direction, use "aconnect 80:2 72:0".
HTH
Clemens
5:26 p.m.
Clemens Ladisch wrote:
Christian Bunge wrote:
Sorry that was a error in writing. I use "aconnect 80:2 72:0". But
SpiralSynth don't react.
I connect Xsteem (atari emulator) in the same way and it works wonderful. It
is possible that SpiralSynth don't work with the alsa 0.9.x oss emulation?.
Thanks
Christain
/dev/snd/midiC1D0 is my first virtual midiport
In theory, this is an internal file, and you are supposed to use
/dev/midi01 instead. In practice, it doesn't matter. :)
then I connect 72:0 to 80:2 (external keyboard)
but I can't hear any
sound from Spiralsynth when I play on the keyboard.
72:0 Virtual Raw MIDI 1-0 VirMIDI 1-0
80:2 MidiSport 4x4 MidiSport 4x4 Port 2
If you run "aconnect 72:0 80:2", all data written to /dev/midi01 will
be sent to the third output port of the 4x4. To send data in the other
direction, use "aconnect 80:2 72:0". 
5:42 p.m.
On 08/25/03 15:14:32, Christian Bunge wrote:
Sorry that was a error in writing. I use
"aconnect 80:2 72:0". But
SpiralSynth don't react.
I connect Xsteem (atari emulator) in the same way and it works wonderful. It
is possible that SpiralSynth don't work with the alsa 0.9.x oss emulation?.
It hasn't worked for me so far.
Austin
--
Austin Acton Hon.B.Sc.
Synthetic Organic Chemist, Teaching Assistant
Department of Chemistry, York University, Toronto
MandrakeClub Volunteer (www.mandrakeclub.com)
homepage: www.groundstate.ca
7763
days inactive
7766
days old
linux-audio-user@lists.linuxaudio.org
3 comments
3 participants
participants (3)
-
Austin -
Christian Bunge -
Clemens Ladisch