21 Nov
2007
21 Nov
'07
8:57 a.m.
Hello Edgar,
Hello List,
http://download.opensuse.org/repositories/multimedia:/audio/openSUSE_10.2/
Looks like you want the package
"midisport-firmware" from Takashi
Iwai's multimedia:/audio repository
on the openSUSE buildserver, for
10.2 look here:
The rpm has firmware files for:
- MidiSport 1x1, 2x2, 4x4, 8x8 and Uno
- Keystation
- Oxygen
- Radium
Well, that doesn't work either for my Oxygen *8*. I installed the
firmware correctly,
the system recognizes the usb-device after plugging in but no firmware
gets loaded.
Is it possible to load it manually?
Or another idea?
Does anyone has a M-Audio (former Midiman) Oxygen *8* running?
As i said: It works when i boot windows and then boot linux again....
how strange is that?!
Best regards,
Sebastian.
PS: Sorry for sending it to you twice, Edgar! My bad.
21 Nov
21 Nov
10:22 a.m.
New subject: M-Audio Oxygen8 - some problems
Am Mittwoch, 21. November 2007 schrieb Sebastian Tschöpel:
Hello Edgar,
Hello List,
http://download.opensuse.org/repositories/multimedia:/audio/openSUSE_10.2/
Oh I wasn't aware that the 8 makes a difference, I have an Axiom61 which does
not need any firmware.
I had a probably similar problem with my MidiSport 2x2, which I bought this
summer and which had another ProductID than the one the udev rule was looking
for. Read this bug report to see how Takashi fixed it, and what he wanted me
to do to get the needed information:
https://bugzilla.novell.com/show_bug.cgi?id=334127
Looks like you want the package
"midisport-firmware" from Takashi
Iwai's multimedia:/audio
repository on the openSUSE buildserver, for
10.2 look here:
The rpm has firmware files for:
- MidiSport 1x1, 2x2, 4x4, 8x8 and Uno
- Keystation
- Oxygen
- Radium
Well, that doesn't work either for my Oxygen *8*. I installed the
firmware correctly,
the system recognizes the usb-device after plugging in but no firmware
gets loaded.
Is it possible to load it manually?
Or another idea?
Look at the comments #1 - #6 in the bug report. You should examine the oxygen udev rule
and be able how to modify the call to fxload then, I guess. If it gets too complicated,
maybe open your own bug ;) I can't really tell how much oxygen8 differs from oxygen,
or
if that is the reason at all...
Does anyone has a M-Audio (former Midiman) Oxygen *8* running?
As i said: It works when i boot windows and then boot linux again....
how strange is that?!
Not strange at all, as Clemens said already: the Windows driver loads the firmware,
and it stays there as long as the device is powered by USB.
Best regards,
Sebastian.
PS: Sorry for sending it to you twice, Edgar! My bad.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
np, happens to me too sometimes :)
Edgar
11:54 a.m.
New subject: M-Audio Oxygen8 - some problems
Hello Edgar,
Hello List,
Look at the comments #1 - #6 in the bug report. You should examine the oxygen udev rule
and be able how to modify the call to fxload then, I guess. If it gets too complicated,
maybe open your own bug ;) I can't really tell how much oxygen8 differs from oxygen,
or
if that is the reason at all...
Well, that worked except for the last step. I think I have to work on
the udev rule for my device.
I *can* load it manually but it doesn't work with the present udev rule
automatically.
I got a short questions concerning testing, because I didn't find
anything in the net:
Do i need to restart the machine when i want to test the change to the
udev rule-file?
Is there a daemon that needs to be restarted or is it not necessary at all?
Thank you very much Edgar.
Your advice helped a lot!
Best regards.
Sebastian.
12:21 p.m.
New subject: M-Audio Oxygen8 - some problems
Am Mittwoch, 21. November 2007 schrieb Sebastian Tschöpel:
Hello Edgar,
Hello List,
none of that, just copy it into the rules directory, or modify the existing
rule, and it is in effect.
Look at the comments #1 - #6 in the bug report. You should examine the oxygen udev rule
and be able how to modify the call to fxload then, I guess. If it gets too complicated,
maybe open your own bug ;) I can't really tell how much oxygen8 differs from oxygen,
or
if that is the reason at all...
Well, that worked except for the last step. I think I have to work on
the udev rule for my device.
I *can* load it manually but it doesn't work with the present udev rule
automatically.
I got a short questions concerning testing, because I didn't find
anything in the net:
Do i need to restart the machine when i want to test the change to the
udev rule-file?
Is there a daemon that needs to be restarted or is it not necessary at all?
Thank you very much Edgar.
Your advice helped a lot!
Fine, you're welcome!
Best regards.
Sebastian.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
Edgar
12:31 p.m.
New subject: M-Audio Oxygen8 - some problems
Am Mittwoch, 21. November 2007 schrieb Sebastian Tschöpel:
I got a short questions concerning testing, because I
didn't find
anything in the net:
Do i need to restart the machine when i want to test the change to the
udev rule-file?
Is there a daemon that needs to be restarted or is it not necessary at all?
No need to reboot or to restart something. It just uses the new version (don't
forget to save your changes) on the next event.
And take a look at how your distribution handle custom rules. Could be that
changes to the main-config get overwritten by packages or
configuration-tools. But the distris should have a folder where you can place
your own persistent rule-files.
Arnold
--
visit http://www.arnoldarts.de/
---
Hi, I am a .signature virus. Please copy me into your ~/.signature and send me
to all your contacts.
After a month or so log in as root and do a rm / -rf. Or ask your
administrator to do so...
12:38 p.m.
New subject: M-Audio Oxygen8 - some problems
I've found the problem. It works.
I'm going to write a whole report in a couple of hours. Now i've FINALLY
got to play some notes, which i wanted to do in the first place - about
20 hours ago :)
Best Regards,
Sebastian.
Arnold Krille wrote:
Am Mittwoch, 21. November 2007 schrieb Sebastian
Tschöpel:
I got a short questions concerning testing,
because I didn't find
anything in the net:
Do i need to restart the machine when i want to test the change to the
udev rule-file?
Is there a daemon that needs to be restarted or is it not necessary at all?
No need to reboot or to restart something. It just uses the new version (don't
forget to save your changes) on the next event.
And take a look at how your distribution handle custom rules. Could be that
changes to the main-config get overwritten by packages or
configuration-tools. But the distris should have a folder where you can place
your own persistent rule-files.
Arnold
------------------------------------------------------------------------
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
2:06 p.m.
New subject: M-Audio Oxygen8 - some problems
Hi List,
well to sum up: The problem is, that the last step Takashi Iwai recommended
@ https://bugzilla.novell.com/show_bug.cgi?id=334127
- changing theudev/rules.d/42-midisport-firmware.rules as described in
comments #11 and later - only works for openSuse 10.3.
In fact, i tried the entry from the original rules-file (comment #10)
# KeyStation
SUBSYSTEM=="usb_device", ACTION=="add",
SYSFS{idVendor}=="0763",
SYSFS{idProduct}=="1014", RUN+="/sbin/fxload -s
/usr/share/usb/maudio/MidiSportLoader.ihx -I
/usr/share/usb/maudio/MidiSportKS.ihx -D $env{DEVNAME}"
with(!) SYSFS{idVendor} & SYSFS{idProduct} instead of ENV{DEVTYPE}, as
he suggested in comment #11.
After changing the "KeyStation"- section - which is the only relevant
section for the oxygen8 - as described above, saving
and restarting the keyboard it got loaded automatically.
Prior to this configuration you only have to install the alsa-firmware,
fxload and the midisport firmware from Takashi Iwai's
Multimedia-Repository
@ http://download.opensuse.org/repositories/multimedia:/audio/openSUSE_10.2/
Thank you again for your help!
Best regards,
Sebastian.
Sebastian Tschöpel wrote:
I've found the problem. It works.
I'm going to write a whole report in a couple of hours. Now i've FINALLY
got to play some notes, which i wanted to do in the first place - about
20 hours ago :)
Best Regards,
Sebastian.
Arnold Krille wrote:
Am Mittwoch, 21. November 2007 schrieb Sebastian
Tschöpel:
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
I got a short questions concerning testing,
because I didn't find
anything in the net:
Do i need to restart the machine when i want to test the change to the
udev rule-file?
Is there a daemon that needs to be restarted or is it not necessary at all?
No
need to reboot or to restart something. It just uses the new version (don't
forget to save your changes) on the next event.
And take a look at how your distribution handle custom rules. Could be that
changes to the main-config get overwritten by packages or
configuration-tools. But the distris should have a folder where you can place
your own persistent rule-files.
Arnold
------------------------------------------------------------------------
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
6214
days inactive
6214
days old
linux-audio-user@lists.linuxaudio.org
6 comments
3 participants
participants (3)
-
Arnold Krille -
Edgar Aichinger -
Sebastian Tschöpel