8 Jul
2008
8 Jul
'08
9:25 a.m.
Greetings,
Has anyone here used a webcam with Pd ? Or Fluxus ? Or Gephex or FLxER ?
If so, how ?
I have my camera working now with xawtv4 and luvcview, but I'm having a
terrible time with just about everything else.
Advice would be nice. :)
Anyone ?
Best,
dp
8 Jul
8 Jul
11:07 a.m.
Hallo,
Dave Phillips hat gesagt: // Dave Phillips wrote:
Has anyone here used a webcam with Pd ? Or Fluxus ? Or
Gephex or FLxER ?
If so, how ?
If you run video4linux in version 1, you should have no problems using
a webcam with Gem or PDP in Pd. I don't think, they support v4l2 yet.
Ciao
--
Frank Barknecht _ ______footils.org__
11:11 a.m.
and unfortunately the uvc driver is V4L2 only... (I am guessing by the fact
that luvcviewer is being used that this is the problem - I am in the same
boat here)
On Tue, Jul 8, 2008 at 11:07 PM, Frank Barknecht <fbar(a)footils.org> wrote:
Hallo,
Dave Phillips hat gesagt: // Dave Phillips wrote:
Has anyone here used a webcam with Pd ? Or Fluxus
? Or Gephex or FLxER ?
If so, how ?
If you run video4linux in version 1, you should have no problems using
a webcam with Gem or PDP in Pd. I don't think, they support v4l2 yet.
Ciao
--
Frank Barknecht _ ______footils.org__
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
11:12 a.m.
I only used a webcam with pd but my experience is limited (mostly
because everything just worked out of the box for me). AFAIK there
are some issues with newer cameras that are only supported by v4l2.
In any case, there are several packages that support a camera input:
GEM, pdp (which you probably already know) and gridflow
(www.gridflow.ca). Gridflow is a matrix based image processing
library.
In GEM, [pix_video] is your friend. The help file shows you haw it
should be used.
In pdp [pdp_4l] or [pdp_v4l2]
in gridflow you use [#camera]. I know that some new functionality in
terms of interfacing with various camera drivers has recently been
added to gridflow so there are chances that your webcam will be
supported. Also, gridflow's [#camera] is an abstraction which, when
opened, gives you quite a few options for user-friendly
configurations.
Note, that if you are mostly interested in GEM, [pix_video] does not
work for you but either pdp or gridflow does, there a bridges for
exchanging between pdp and GEM or gridflow and GEM.
HTH... although I know it's vague...
./MiS
On Tue, Jul 8, 2008 at 7:24 AM, Dave Phillips <dlphillips(a)woh.rr.com> wrote:
Greetings,
Has anyone here used a webcam with Pd ? Or Fluxus ? Or Gephex or FLxER ?
If so, how ?
I have my camera working now with xawtv4 and luvcview, but I'm having a
terrible time with just about everything else.
Advice would be nice. :)
Anyone ?
Best,
dp
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
--
./MiS
514-344-0726
http://www.creazone.ca
10 Jul
10 Jul
8:42 a.m.
Michal Seta wrote:
... there are several packages that support a camera
input:
GEM, pdp (which you probably already know) and gridflow
(www.gridflow.ca). Gridflow is a matrix based image processing
library.
...
Note, that if you are mostly interested in GEM, [pix_video] does not
work for you but either pdp or gridflow does, there a bridges for
exchanging between pdp and GEM or gridflow and GEM.
Thanks a lot Michael, I will definitely look into both pdp and gridflow.
Thanks also to Frank and Danni, the input is greatly appreciated.
Guess what I'll be working on today... :)
Best,
dp
5916
days inactive
5918
days old
linux-audio-user@lists.linuxaudio.org
4 comments
4 participants
participants (4)
-
Danni Coy -
Dave Phillips -
Frank Barknecht -
Michal Seta