15 Jan
2014
15 Jan
'14
4:13 p.m.
Is anyone using jackd on an ARM device? I get the same error described here:
https://github.com/archlinuxarm/PKGBUILDs/issues/601
"FATAL: cannot locate cpu MHz in /proc/cpuinfo"
Someone tried to submit a kernel patch to fix it but people don't
think it should be fixed:
http://www.spinics.net/lists/arm-kernel/msg294090.html
# cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 10 (v7l)
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
processor : 1
model name : ARMv7 Processor rev 10 (v7l)
Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x2
CPU part : 0xc09
CPU revision : 10
Hardware : Generic OMAP4 (Flattened Device Tree)
Revision : 0000
Serial : 0000000000000000
- Grant
15 Jan
15 Jan
4:56 p.m.
On 01/15/2014 04:12 PM, Grant wrote:
Is anyone using jackd on an ARM device?
Yes, I do, on several devices.
I get the same error described here:
https://github.com/archlinuxarm/PKGBUILDs/issues/601
"FATAL: cannot locate cpu MHz in /proc/cpuinfo"
Never encountered this issue but that's probably because I'm using older
kernels. That's not an option for you?
Best,
Jeremy
5:03 p.m.
Is anyone
using jackd on an ARM device?
Yes, I do, on several devices.
I get the same error described here:
https://github.com/archlinuxarm/PKGBUILDs/issues/601
"FATAL: cannot locate cpu MHz in /proc/cpuinfo"
Never encountered this issue but that's probably because I'm using older
kernels. That's not an option for you?
5:51 p.m.
On 01/15/2014 05:02 PM, Grant wrote:
Well I'm on a Pandaboard ES and I don't think kernel support has been
great for very long. Which version are you on?
My Cubieboard2 runs 3.4.x I think and my Raspberry Pi is on 3.6.x. I've
had a BeagleBone Black for a short while, not sure what that device was
running, I think it was 3.10.x.
Best,
Jeremy
I'm on 3.12.6. I
Is anyone using jackd on an ARM device?
Yes, I do, on several devices.
I get the same error described here:
https://github.com/archlinuxarm/PKGBUILDs/issues/601
"FATAL: cannot locate cpu MHz in /proc/cpuinfo"
Never encountered this issue but that's probably because I'm using older
kernels. That's not an option for you? posted to the jack-devel list. I hope they are
planning to fix this.
- Grant
16 Jan
16 Jan
3:22 a.m.
On 16/01/14 03:51, Jeremy Jongepier wrote:
On 01/15/2014 05:02 PM, Grant wrote:
Well I'm on a Pandaboard ES and I don't think kernel support has been
great for very long. Which version are you on?
My Cubieboard2 runs 3.4.x I think and my Raspberry Pi is on 3.6.x. I've
had a BeagleBone Black for a short while, not sure what that device was
running, I think it was 3.10.x.
+1 for Raspberries, raspbian from has jack and my install (wheezy, middle of
last year) uses:
Linux rpi-1 3.6.11+ #371 PREEMPT Thu Feb 7 16:31:35 GMT 2013 armv6l
Raspbian is based on the debian version for the older arm, which they build for
arm5, but is compiled for arm6 with floating point etc to match the Pi, and has
the Broadcom GPU stuff and other drivers plus the media players etc that use
them. Debian also has an arm7 version if you are using a newer arm chip.
Simon
Is anyone using jackd on an ARM device?
Yes, I do, on several devices.
I get the same error described here:
https://github.com/archlinuxarm/PKGBUILDs/issues/601
"FATAL: cannot locate cpu MHz in /proc/cpuinfo"
Never encountered this issue but that's probably because I'm using older
kernels. That's not an option for you?
Best,
Jeremy
I'm on 3.12.6. I
posted to the jack-devel list. I hope they are
planning to fix this.
- Grant
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
3969
days inactive
3970
days old
linux-audio-user@lists.linuxaudio.org
4 comments
3 participants
participants (3)
-
Grant -
Jeremy Jongepier -
Simon Wise