New subject: >64 Channels @ 96k ?

13 Oct 2019

Well, the problem seems to be that there's no dedicated physical USB 3.0 port on my
machine, the physical
port act as the one or the other depending on what you connect.

All physical ports have the SuperSpeed symbol, but none of them automatically connects to
the 
(internal) USB 3.0 root hub if I connect a USB 2.0 device, so I assume there's some
logic that 
detects whether the connected device is 2.0 or 3.0 and connects it accordingly. Like, when
I connect
a USB 3.0 storage device, lsusb shows it as connected to the 3.0 bus.

So I my guess would be, if I use a dedicated (external) USB 3.0 hub, it would be detected
as a 3.0 device 
and routed to the (internal) 3.0 bus, and thus the devices connected to the external hub
would be as well. 
But, of course, that's just speculation. I might just get a 3.0 hub and try. 

Ralf Mardorf wrote on 13.10.2019 18:37 (GMT +02:00):
...
  On Sun, 13 Oct 2019 18:19:15 +0200 (CEST),
nik(a)parkellipsen.de wrote:
 Or, if i connect an external USB 3.0 hub, will it
wire external
devices to the 3.0 internal bus?  
 USB 3 is backward compatible. Occasionally I connect an USB 2 Scarlett
 18i20 2nd gen to a GA-B85M-D3H mobo's USB 3 slot of an Arch Linux
 machine. This works without issues and allows lower latency, than is
 possible with a PCIe slot assembled RME HDSPe AIO on the same machine.
 Even if the USB 3 port shouldn't be the best for an audio device on
 your machine, it at least should sort of work, perhaps causing xruns.
 That it doesn't work at all, might be a pointer to an issue of your
 computer.

Re: [LAU] Behringer X32 - glitch problems