18 Mar
2004
18 Mar
'04
3:18 p.m.
Been trying to get a system up with the newest kernel in Mandrake's
distro 10.0 rc 1.
If anyone is up successfully with this setup can you give a rundown on
your system setup?
I'm running a Shuttle AK39n Mobo w/ via chipset, Athalon XP 2500,
512RAM.
I see Alsa load drivers but have no sound as yet.
I run Jackd from Qjackctl...runs first time as user. If I stop it, it
wont start again. Should Jack be leaving the temp files in /tmp when it
shuts off? I did set up tmpfs on /tmp like on 2.4.whatever it was.
When I do run jackd not as root, I fire up Ardour and it cant see jack.
Austin, you out there??
Thanks
R~
18 Mar
18 Mar
6:38 p.m.
Quoting Russell Hanaghan <hanaghan(a)starband.net>et>:
Been trying to get a system up with the newest kernel
in Mandrake's
distro 10.0 rc 1.
It would be much nicer if you'd try 10.0 final first.
I'm running a Shuttle AK39n Mobo w/ via chipset,
Athalon XP 2500,
512RAM.
I see Alsa load drivers but have no sound as yet.
Which sound module is it? (snd-xxx)
Volume controls are up?
What happens when you try to play sound with xmms using the alsa output?
What about the oss output?
I run Jackd from Qjackctl...runs first time as user.
If I stop it, it
wont start again.
Very odd. I've never heard of that.
Does the same thing happen when running jackd from the command line?
Austin
19 Mar
19 Mar
3:36 a.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
On Thu, 2004-03-18 at 14:32, aacton(a)yorku.ca wrote:
snd-via82xx
Hmmm..Interesting..just tried this. Jackd runs from command line and
Ardour sees it as does AMS --jack. Is that a permissions issue with
Qjackctl of some sort?
Quoting Russell Hanaghan
<hanaghan(a)starband.net>et>:
Have not checked...is it available yet?
Been trying to get a system up with the newest
kernel in Mandrake's
distro 10.0 rc 1.
It would be much nicer if you'd try 10.0 final first. I'm running a Shuttle AK39n Mobo w/ via
chipset, Athalon XP 2500,
512RAM.
I see Alsa load drivers but have no sound as yet.
Which sound module is it? (snd-xxx) Volume controls are up?
yes
What happens when you try to play sound with xmms
using the alsa output?
Actually the alsa driver did not appear by default in Xmms
What about the oss output?
nothing either...also
I usually get Arts sounds in KDE but not with this
install.
I run Jackd from Qjackctl...runs first time as
user. If I stop it, it
wont start again.
Very odd. I've never heard of that.
Does the same thing happen when running jackd from the command line?
Austin
21 Mar
21 Mar
4:19 p.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
On Fri, 2004-03-19 at 02:28, Russell Hanaghan wrote:
snd-via82xx
Have you tried this? (as root)
service sound stop; service alsa stop;
rm -f /etc/asound.state;
service sound start; service alsa start
(see http://qa.mandrakesoft.com/twiki/bin/view/Main/MandrakeLinux10ReleaseNotes)
# urpmi xmms-alsa
I see Alsa load drivers but have no sound as yet.
Which sound module is it? (snd-xxx) Volume controls are up?
yes What happens
when you try to play sound with xmms using the alsa output?
Actually the alsa
driver did not appear by default in Xmms Hmmm..Interesting..just tried this. Jackd runs from
command line and
Ardour sees it as does AMS --jack. Is that a permissions issue with
Qjackctl of some sort?
Well, yes. If you're running ardour as root and qjackctl as a user,
they won't see each other. Jack is user-specific.
Austin
--
Austin Acton
Synthetic Organic Chemist, Teaching Assistant, Ph.D. Candidate
Department of Chemistry, York University, Toronto
MandrakeLinux Volunteer Developer, homepage: www.groundstate.ca
11:57 p.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
On Sun, 2004-03-21 at 12:14, Austin Acton wrote:
Perhaps my description was poor...I was running both either as user in
same session or as root in different session.
I had to list my card as Hw:0,1 in Arts...also in Xmms-alsa. But have
sound now none the less.
Thanks
On Fri, 2004-03-19 at 02:28, Russell Hanaghan wrote:
snd-via82xx
Have you tried this? (as root)
service sound stop; service alsa stop;
rm -f /etc/asound.state;
service sound start; service alsa start
Ran Alsaconf. That seemed to clear up my issues.
I see Alsa load drivers but have no sound as yet.
Which sound module is it? (snd-xxx) Volume controls are up?
yes
(see http://qa.mandrakesoft.com/twiki/bin/view/Main/MandrakeLinux10ReleaseNotes)
# urpmi xmms-alsa
Realised this after I'd sent email! Now works fine.
What
happens when you try to play sound with xmms using the alsa output?
Actually the
alsa driver did not appear by default in Xmms Hmmm..Interesting..just tried this. Jackd runs
from command line and
Ardour sees it as does AMS --jack. Is that a permissions issue with
Qjackctl of some sort?
Well, yes. If you're running ardour as root and qjackctl as a user,
they won't see each other. Jack is user-specific.
Austin
19 Mar
19 Mar
1:28 p.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
Austin,
I looked at the Mandrake page and see that 10.0 "Community" is out.
Downloading as I speak...
With respect to dependencies on new software are the contrib or cooker
mirrors the best place to get RPM's for 10.0?
Is the stuff on Mandrake Club current including DAW apps? If it is maybe
I should pay up and support Mandrake. (I have bought box sets from them
before)
Hope you dont mind me contacting you directly.
Respectfully,
R~
On Thu, 2004-03-18 at 14:32, aacton(a)yorku.ca wrote:
Quoting Russell Hanaghan
<hanaghan(a)starband.net>et>:
Been trying to get a system up with the newest
kernel in Mandrake's
distro 10.0 rc 1.
It would be much nicer if you'd try 10.0 final first.
I'm running a Shuttle AK39n Mobo w/ via
chipset, Athalon XP 2500,
512RAM.
I see Alsa load drivers but have no sound as yet.
Which sound module is it? (snd-xxx)
Volume controls are up?
What happens when you try to play sound with xmms using the alsa output?
What about the oss output?
I run Jackd from Qjackctl...runs first time as
user. If I stop it, it
wont start again.
Very odd. I've never heard of that.
Does the same thing happen when running jackd from the command line?
Austin
1:52 p.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
On Fri, 2004-03-19 at 09:19, Russell Hanaghan wrote:
Austin,
I looked at the Mandrake page and see that 10.0 "Community" is out.
Downloading as I speak...
With respect to dependencies on new software are the contrib or cooker
mirrors the best place to get RPM's for 10.0?
Is the stuff on Mandrake Club current including DAW apps? If it is maybe
I should pay up and support Mandrake. (I have bought box sets from them
before)
Hope you dont mind me contacting you directly.
Guess it wasn't quite so directly huh? Doh! "insert wrinkly smiley face
here if applicable"
Respectfully,
R~
On Thu, 2004-03-18 at 14:32, aacton(a)yorku.ca wrote:
Quoting Russell Hanaghan
<hanaghan(a)starband.net>et>:
Been trying to get a system up with the newest
kernel in Mandrake's
distro 10.0 rc 1.
It would be much nicer if you'd try 10.0 final first.
I'm running a Shuttle AK39n Mobo w/ via
chipset, Athalon XP 2500,
512RAM.
I see Alsa load drivers but have no sound as yet.
Which sound module is it? (snd-xxx)
Volume controls are up?
What happens when you try to play sound with xmms using the alsa output?
What about the oss output?
I run Jackd from Qjackctl...runs first time as
user. If I stop it, it
wont start again.
Very odd. I've never heard of that.
Does the same thing happen when running jackd from the command line?
Austin
21 Mar
21 Mar
4:15 p.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
On Fri, 2004-03-19 at 12:44, Russell Hanaghan wrote:
> With respect to dependencies on new software are
the contrib or cooker
> mirrors the best place to get RPM's for 10.0?
I don't understand your question. 10 is the latest stable release.
Cooker is the development version (to be 10.1). Contrib is a separate
repository of good rpms but that are unsupported by MandrakeSoft.
Don't mix cooker RPMs with stable releases. Run one or the other.
> Is the stuff on Mandrake Club current including
DAW apps? If it is maybe
> I should pay up and support Mandrake. (I have bought box sets from them
> before)
There's not much on Mandrake Club that you can't get elsewhere. The
club is mainly intended to be a way for people who can't buy the CDs to
contribute to the company. You can volunteer to help and get a free
membership, or you can buy a membership.
Austin
--
Austin Acton
Synthetic Organic Chemist, Teaching Assistant, Ph.D. Candidate
Department of Chemistry, York University, Toronto
MandrakeLinux Volunteer Developer, homepage: www.groundstate.ca
22 Mar
22 Mar
12:02 a.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
On Sun, 2004-03-21 at 12:10, Austin Acton wrote:
On Fri, 2004-03-19 at 12:44, Russell Hanaghan wrote:
My point was this: I hate building from source...never seems to go right
without hours of digging for extra stuff. Hence, I rely heavily on rpms.
I usually set up a "contrib" mirror and also Thacs rpms. 10.0 is
new...on the contrib mirrors, the versions of Ardour, jack, etc are
usually behind. (I know you invest a lot of time into producing these
for Mandrake users and I'm quite sure your busy) Often the Cooker
versions are later versions...
I usually try not to mix them...but in a pinch, sometimes that has
worked for me.
R~
> With respect to dependencies on new software
are the contrib or cooker
> mirrors the best place to get RPM's for 10.0?
I don't understand your question. 10 is the latest stable release.
Cooker is the development version (to be 10.1). Contrib is a separate
repository of good rpms but that are unsupported by MandrakeSoft.
Don't mix cooker RPMs with stable releases. Run one or the other. > Is the stuff on Mandrake Club current
including DAW apps? If it is maybe
> I should pay up and support Mandrake. (I have bought box sets from them
> before)
There's not much on Mandrake Club that you can't get elsewhere. The
club is mainly intended to be a way for people who can't buy the CDs to
contribute to the company. You can volunteer to help and get a free
membership, or you can buy a membership.
Austin
12:25 a.m.
New subject: [linux-audio-user] Jack 0.95 Mandrake 10.0 Rc1, Kernel 2.6.2, alsa, etc...
On Sun, 2004-03-21 at 22:53, Russell Hanaghan wrote:
My point was this: I hate building from source...never
seems to go right
without hours of digging for extra stuff. Hence, I rely heavily on rpms.
I usually set up a "contrib" mirror and also Thacs rpms. 10.0 is
new...on the contrib mirrors, the versions of Ardour, jack, etc are
usually behind. (I know you invest a lot of time into producing these
for Mandrake users and I'm quite sure your busy) Often the Cooker
versions are later versions...
Better for you to use Thac's then.
They are built on the latest stable release (10).
Cooker RPMs are built on cooker, which may have different libraries,
gcc, glibc, etc.
Austin
7692
days inactive
7695
days old
linux-audio-user@lists.linuxaudio.org
9 comments
3 participants
participants (3)
-
aacton＠yorku.ca -
Austin Acton
-
Russell Hanaghan