24 Apr
2006
24 Apr
'06
9:30 a.m.
Hello,
i'm new to this list, so i hope i'm doing everything right.
I want to use my Korg 05 R/W midi soundmodul via the serial tohost
interface as an midi Soundmodul for midi data coming from the linux-box
and (!) as an Midi Interface for my keyboard connected to the korg05r/w.
In other words : the soundmodul should play my midis from computer and
should transfer the midi data coming from the keyboard to the computer.
the keyboard is connectet with midi-in and the computer is connected to
to-host.
I'm using the snd-serial-u16550 driver from alsa.
After having a few problems it works, with only one Problem:
I have to "restart" (turn off and turn on) my soundmodul everytime i
change the program or the midifile.
In some midifiles i have to restart it in the middle.
In windows i didn't have this problem, so i think it havt to work unter
linux, too ?
Does anyone have an idea ?
Marian
p.s:
My System :
DeMuDi testing
Kernel 2.6.16 selfcompiled and realtime patched
starting driver with :
snd-serial-u16550 port=0x2f8 irq=3
24 Apr
24 Apr
9:51 a.m.
On Monday 24 April 2006 12:30, pr.pa(a)web.de was like:
i'm new to this list, so i hope i'm doing
everything right.
I want to use my Korg 05 R/W midi soundmodul via the serial tohost
interface as an midi Soundmodul for midi data coming from the linux-box
and (!) as an Midi Interface for my keyboard connected to the korg05r/w.
In other words : the soundmodul should play my midis from computer and
should transfer the midi data coming from the keyboard to the computer.
the keyboard is connectet with midi-in and the computer is connected to
to-host.
I'm using the snd-serial-u16550 driver from alsa.
OK, I am not familiar with this device. Is this essentially a soundcard or is
it slightly different in some way?
After having a few problems it works, with only one
Problem:
I have to "restart" (turn off and turn on) my soundmodul everytime i
change the program or the midifile.
In some midifiles i have to restart it in the middle.
Weird.
In windows i didn't have this problem, so i think
it havt to work unter
linux, too ?
No, not necessarily - this just means you don't have any hardware problems.
Look your device up here to see if it is supported by ALSA:
http://www.alsa-project.org/alsa-doc/
If there are further configurations you need to make they should be listed
here. Other places worth looking are:
http://alsa.opensrc.org/
http://demudi.agnula.org/wiki/DocumentsFaq
My System :
DeMuDi testing
Kernel 2.6.16 selfcompiled and realtime patched
starting driver with :
snd-serial-u16550 port=0x2f8 irq=3
--
cheers,
tim hall
http://glastonburymusic.org.uk/tim
10:30 a.m.
Hello,
OK, I am not familiar with this device. Is this
essentially a soundcard or is
it slightly different in some way?
No it isn't a Soundcard, it's a device
connected to the serial port to
the computer, that convert midi data in sound.
The Soundmodul isn't listet in the Alsa Support List, but it's no soundcard.
Weird.
Yes, and i can't find any reasons, or
midi-data that "reset" the midiport.
in my /etc/modules i added only :
snd-serial-u16550 port=0x2f8 irq=3
it dosen't matter if i remove this line and do it manually :
setserial /dev/ttyS1 uart none
modprobe snd-serial-u16550 port=0x2f8 irq=3
in both cases "aconnect -o" show me the port 20:0 for the snd-serial-u16550.
aplaymidi -p 20:0 song.mid
dosen't play anything ( it seems the soundmodul dosen't get any
midi-data, because the midi-data-LED dosen't blink )
a restart makes the LED blinking and i'm able to hear the music.
thanks,
Marian
2:42 p.m.
pr.pa(a)web.de wrote:
aplaymidi -p 20:0 song.mid
dosen't play anything ( it seems the soundmodul dosen't get any
midi-data, because the midi-data-LED dosen't blink )
a restart makes the LED blinking and i'm able to hear the music.
It seems this device doens't look for a serial cable after a reset.
Regards,
Clemens
6:39 p.m.
New subject: [linux-audio-user] Apodio Review??!!
Tryed Apodio. It does wrong things in crucial tasks,
but it is the best and the more up to date multimedia
distro that I´ve tryed.
Bad stuff:
-Starts Alsa (ICE1712, Delta 66) automaticaly but it
doenst work, I have to go root and:
/etc/rc.d/init.d/alsa stop
/etc/rc.d/init.d/alsa start
than we have sound.
-Pd does not work.. it goes like:
retrying to connect...
retrying to connect...
retrying to connect...
retrying to connect...
.
.
.
retrying to connect...
connecting to stream socket: Network is unreachable
(101)
no flag makes it better but "-nogui" with pd -nogui
it starts fine but... no gui, no gui...
-Last: it does not install on hard drive propertly. I
am trying everything, no success.
Even so, It has everything, it is small, easy to use.
A pitty that it does this big score messy stuff.
If anyone have any suggestion or can help a bit??!!
Specially with PD, that is what I use most.
long see
ref
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
8:27 p.m.
New subject: [linux-audio-user] Apodio Review??!!
Renato Fabbri wrote:
-Pd does not work.. it goes like:
retrying to connect...
retrying to connect...
retrying to connect...
retrying to connect...
.
.
.
retrying to connect...
connecting to stream socket: Network is unreachable
(101)
no flag makes it better but "-nogui" with pd -nogui
it starts fine but... no gui, no gui...
That looks like either the localhost network interface isn't set up
properly or iptables is blocking localhost. PD uses localhost to
communicate between the gui and engine which is why it starts ok with
the -nogui option. I'm not an apodio user so I can't give specific
directions to fix this but hopefully that'll give you some idea where to
start looking.
--
Jonny
Music - http://jeremah.co.uk
News - http://voxpolis.com
6588
days inactive
6588
days old
linux-audio-user@lists.linuxaudio.org
6 comments
5 participants
participants (5)
-
Clemens Ladisch -
Jonny Stutters -
pr.pa＠web.de -
Renato Fabbri -
tim hall