14 Nov
2002
14 Nov
'02
9:24 a.m.
chris wrote:
I have a midisport 4x4 and try to install
midisport-firmware driver
If I do make install I get:
processing usb44ldr.sys ...
loader data not found
Please try with the latest driver version.
It should work with version 4.1.16 (2002-10-15).
Mark Knecht wrote:
I'm a little unclear whether this supports the 2X2
All MidiSport devices (including 1x1 and 2x2) are supported.
My mail was somewhat unclear on that (but the readme lists all devices).
and whether you want that tested?
Too late, now I already know it works.
But you could simply use it instead. ;-)
Regards,
Clemens
14 Nov
14 Nov
1:32 p.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
Great news! I saw Fernando had tested this adapter anyway. How I'll wait for
him to make his packages. ;-)
-----Original Message-----
From: linux-audio-user-admin(a)music.columbia.edu
[mailto:linux-audio-user-admin@music.columbia.edu]On Behalf Of Clemens
Ladisch
Sent: Thursday, November 14, 2002 5:20 AM
To: chris
Cc: linux-audio-user(a)music.columbia.edu
Subject: Re: [linux-audio-user] Fwd: Please test my MidiSport firmware
loader
chris wrote:
I have a midisport 4x4 and try to install
midisport-firmware driver
If I do make install I get:
processing usb44ldr.sys ...
loader data not found
Please try with the latest driver version.
It should work with version 4.1.16 (2002-10-15).
Mark Knecht wrote:
I'm a little unclear whether this supports the 2X2
All MidiSport devices (including 1x1 and 2x2) are supported.
My mail was somewhat unclear on that (but the readme lists all devices).
and whether you want that tested?
Too late, now I already know it works.
But you could simply use it instead. ;-)
Regards,
Clemens
6:55 p.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
Am Donnerstag, 14. November 2002 14:20 schrieb Clemens Ladisch:
chris wrote:
I have download the driver version 4.1.16 (2002-10-15)
Everything seems to be OK
[root@localhost midisport-firmware]# make install
gcc -o extractfirmware extractfirmware.c
./extractfirmware
processing USB44LDR.SYS ...
writing MidiSportLoader.ihx
writing MidiSport4x4.ihx
install -cD midisport_fw /etc/hotplug/usb/midisport_fw
install -cD -m 0644 MidiSportLoader.ihx /usr/share/usb/MidiSportLoader.ihx
for s in 2x2 1x1 KS 4x4 8x8-2.10 8x8-2.21; do \
if [ -e MidiSport$s.ihx ]; then \
install -cD -m 0644 MidiSport$s.ihx
/usr/share/usb/MidiSport$s.ihx; \
fi; \
done
test -e /etc/hotplug/usb.usermap || touch /etc/hotplug/usb.usermap
grep -v '^midisport_fw\>' /etc/hotplug/usb.usermap >
/etc/hotplug/usb.usermap.tmp
cat /etc/hotplug/usb.usermap.tmp midisport_fw.usermap >
/etc/hotplug/usb.usermap
rm -f /etc/hotplug/usb.usermap.tmp
*** MidiSport firmware loader has been installed. ***
How can I connecte midi programs to my midimansport4x4?
Aconnect don`t show me any new midiports.
Thanks
chris
I have a midisport 4x4 and try to install
midisport-firmware driver
If I do make install I get:
processing usb44ldr.sys ...
loader data not found
Please try with the latest driver version.
It should work with version 4.1.16 (2002-10-15).
15 Nov
15 Nov
5:39 a.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
chris wrote:
[root@localhost midisport-firmware]# make install
processing USB44LDR.SYS ...
writing MidiSportLoader.ihx
writing MidiSport4x4.ihx
...
*** MidiSport firmware loader has been installed. ***
How can I connecte midi programs to my midimansport4x4?
Aconnect don`t show me any new midiports.
It should.
Please make sure that you have the hotplug and fxload packages and some
recent release of ALSA installed (see the README for the URLs).
(Check that /sbin/hotplug and /sbin/fxload exist, and that
"modprobe snd-usb-audio" works.)
When you plug in the 4x4, there should be some messages in
/var/log/messages: new device connected, firmware loading, another new
device, loading of snd-usb-audio.
If it doesn't work, please post the last few messages.
HTH
Clemens
11:28 a.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
I have the same problem...
Nov 15 09:35:38 komar kernel: hub.c: USB new device connect on bus1/1, assigned device
number 7
Nov 15 09:35:38 komar kernel: usb.c: USB device 7 (vend/prod 0x763/0x1001) is not claimed
by any active driver.
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Module setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb/midisport_fw: load /usr/share/usb/MidiSport2x2.ihx
for 763/1001/1 to /proc/bus/usb/001/007
And I've got snd-usb-audio loaded but I had to do it manually.
(loading it after or before connecting the interface doesn't seem to change
anything).
midisport 2x2 (with the latest windows driver from m-audio.com), debian/woody 2.4.18-686,
alsa from cvs.
On Fri, 15 Nov 2002 10:35:18 +0100 (MET)
Clemens Ladisch <clemens(a)ladisch.de> wrote:
--
Michal Seta
CreaZone http://www.creazone.com
No One Receiving http://www.noonereceiving.32k.org
Aconnect don`t
show me any new midiports.
It should.
1:14 p.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
Michal Seta wrote:
Clemens Ladisch <clemens(a)ladisch.de> wrote:
I have the same problem...
Nov 15 09:35:38 komar kernel: hub.c: USB new device connect on bus1/1, assigned device
number 7
Nov 15 09:35:38 komar kernel: usb.c: USB device 7 (vend/prod 0x763/0x1001) is not claimed
by any active driver.
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Module setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb/midisport_fw: load /usr/share/usb/MidiSport2x2.ihx
for 763/1001/1 to /proc/bus/usb/001/007
These messages are fine so far, but there should be more.
Please try to run the download utility manually:
/sbin/fxload -s /usr/share/usb/MidiSportLoader.ihx -I /usr/share/usb/MidiSport2x2.ihx
too see if there are any error messages.
If the download was successful, the product ID should change from 0x1001
to 0x1002, i.e. /proc/bus/usb/devices should contain the line:
P: Vendor=0763 ProdID=1002 Rev= 1.21
Aconnect
don`t show me any new midiports.
It should. And I've got snd-usb-audio loaded but I had to do
it manually.
... alsa from cvs
snd-usb-audio should be loaded automatically. Please check that
/lib/modules/(version)/modules.usbmap contains a line with these numbers:
snd-usb-audio ... 0x0763 0x1002 ...
If not, the ALSA drivers aren't installed correctly.
HTH
Clemens
1:43 p.m.
New subject: [linux-audio-user] [ANN] Documentation on AlsaModularSynth
Hi,
A first draft of documentation on modular synthesis with AlsaModularSynth
is available at http://www.suse.de/~mana/alsamodularsynth_doc.html
Many new features have been added to AlsaModularSynth in the past
weeks, so this document might be helpful.
Have fun !
Matthias
--
Dr. Matthias Nagorni
SuSE GmbH
Deutschherrnstr. 15-19 phone: +49 911 74053375
D - 90429 Nuernberg fax : +49 911 74053483
2:53 p.m.
New subject: [linux-audio-user] [ANN] Documentation on AlsaModularSynth
This is great. Thanks. I'm still working with AMS quite a lot, but I'm
finding that the patches I can build are limited due to my poor 350MHz PII
system :-(
Regards,
Bill
On Fri, 15 Nov 2002, Dr. Matthias Nagorni wrote:
Hi,
A first draft of documentation on modular synthesis with AlsaModularSynth
is available at http://www.suse.de/~mana/alsamodularsynth_doc.html
Many new features have been added to AlsaModularSynth in the past
weeks, so this document might be helpful.
Have fun !
Matthias
18 Nov
18 Nov
2:09 p.m.
New subject: [linux-audio-user] [ANN] Documentation on AlsaModularSynth
On Fri, 15 Nov 2002, Bill Allen wrote:
This is great. Thanks. I'm still working with AMS
quite a lot, but I'm
finding that the patches I can build are limited due to my poor 350MHz PII
system :-(
Try ams-1.5.4. It runs faster (around 25%, I guess) because I'm now using
tables for the exp(). There is possibly still room for performance
improvement. This is however limited until I start to add CPU specific
optimization (like in commercially available softsynths).
Matthias
--
Dr. Matthias Nagorni
SuSE GmbH
Deutschherrnstr. 15-19 phone: +49 911 74053375
D - 90429 Nuernberg fax : +49 911 74053483
2:19 p.m.
New subject: [linux-audio-user] [ANN] Documentation on AlsaModularSynth
Dr. Matthias Nagorni wrote:
This is however limited until I start to add CPU
specific
optimization (like in commercially available softsynths).
Oohlala ;)
--
Patrick Shirkey - Boost Hardware Ltd.
For the discerning hardware connoisseur
Http://www.boosthardware.com
Http://www.djcj.org - The Linux Audio Users guide
========================================
Being on stage with the band in front of crowds shouting, "Get off! No!
We want normal music!", I think that was more like acting than anything
I've ever done.
Goldie, 8 Nov, 2002
The Scotsman
17 Nov
17 Nov
1:51 a.m.
New subject: [linux-audio-user] MidiSport firmware loader
Hi,
ok, I got it working.
Getting the new hotplug/fxload fixed my problem. I was using some old version.
Thanks.
--
Michal Seta
CreaZone http://www.creazone.com
No One Receiving http://www.noonereceiving.32k.org
3 Dec
3 Dec
2:41 a.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
* Michal Seta <mis(a)creazone.com> [Nov 17 02 16:23]:
I have the same problem...
Nov 15 09:35:38 komar kernel: hub.c: USB new device connect on bus1/1, assigned device
number 7
Nov 15 09:35:38 komar kernel: usb.c: USB device 7 (vend/prod 0x763/0x1001) is not claimed
by any active driver.
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb.agent: Module setup midisport_fw for USB product
763/1001/1
Nov 15 09:35:38 komar /etc/hotplug/usb/midisport_fw: load /usr/share/usb/MidiSport2x2.ihx
for 763/1001/1 to /proc/bus/usb/001/007
Clemens, thanks for the firmware. I just got an Uno today and its now
pulsing. Now I have to see if I can make this controller do something
interesting. i actually had a little trouble. The above helped tho,
because I did not see the /proc/bus/usb... in my logs. In fact, there
was nothing there because, of course, I didnt have usbdevfs in my
kernel. So either adding that or the reboot did it. If it needs
usbdevfs, perhaps that could be included in the readme. Thanks again.
--ant
15 Nov
15 Nov
12:26 p.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
Am Freitag, 15. November 2002 10:35 schrieb Clemens Ladisch:
chris wrote:
/sbin/hotplug and /sbin/fxload exist
[root@localhost midisport-firmware]# make
install
processing USB44LDR.SYS ...
writing MidiSportLoader.ihx
writing MidiSport4x4.ihx
...
*** MidiSport firmware loader has been installed. ***
How can I connecte midi programs to my midimansport4x4?
Aconnect don`t show me any new midiports.
It should.
Please make sure that you have the hotplug and fxload packages and some
recent release of ALSA installed (see the README for the URLs).
(Check that /sbin/hotplug and /sbin/fxload exist, and that
"modprobe snd-usb-audio" works.) When you plug in the 4x4, there should be some
messages in
/var/log/messages: new device connected, firmware loading, another new
device, loading of snd-usb-audio.
If it doesn't work, please post the last few messages.
HTH
Clemens
Hi
modeprobe snd-usb-audio works.
lsmod shows me the loaded driver:
usbcore 58304 1 [snd-usb-audio hid usbmouse usb-uhci]
/var/log/messages:
Nov 15 17:08:36 localhost kernel: usb.c: deregistering driver snd-usb-audio
Nov 15 17:08:36 localhost alsa: succeeded
Nov 15 17:08:37 localhost kernel: PCI: Found IRQ 5 for device 00:0a.0
Nov 15 17:08:37 localhost kernel: usb.c: registered new driver snd-usb-audio
Nov 15 17:08:37 localhost alsa: succeeded
but aconnect don't show me any new midiports
It seems to be that I have install alsa-0.9.0rc2
should I have to update it ?
Thanks
chris
8:39 p.m.
New subject: [linux-audio-user] Fwd: Please test my MidiSport firmware loader
Am Freitag, 15. November 2002 17:42 schrieb Clemens Ladisch:
chris wrote:
I have update alsa.
Now it works. I'm very happy about this.
Thank you very very much.
chris
It seems to be that I have install alsa-0.9.0rc2
should I have to update it ?
Yes. (I've hidden an allusion to the required ALSA version somewhere in
the README)
HTH
Clemens
23 Nov
23 Nov
7:41 a.m.
New subject: [linux-audio-user] MidiSport firmware loader no midi in
Hi, all
I have install the MidiSport firmware loader for MidimanSport 4x4.
All 4 outputs are working. But all midi inputs seems not to work.
Any Ideas?
thanks
chris
8054
days inactive
8073
days old
linux-audio-user@lists.linuxaudio.org
15 comments
8 participants
participants (8)
-
Anthony -
Bill Allen -
chris -
Clemens Ladisch -
Dr. Matthias Nagorni -
Mark Knecht -
Michal Seta -
Patrick Shirkey