23 Sep
2003
23 Sep
'03
7:27 p.m.
I hate when I think of a third question after hitting send
this one is maybe best backchanneled to Mark, but I don't have the address
down here, I've just discovered, so let's hope it's of use to other people:
If I'm to figure out how to apply Thomas's patch to the planet flow, it might
help me to have a little detail on what YOU did to apply the patch. given
that I'm semi smart, but have so little information, this might help a great
deal. :)
slowly I learn - *chugga chugga*
--
--------------
Aaron Trumm
NQuit
www.nquit.com
--------------
23 Sep
23 Sep
7:54 p.m.
I hate when I think of a third question after hitting
send
this one is maybe best backchanneled to Mark, but I don't have
the address
down here, I've just discovered, so let's hope it's of use to
other people:
If I'm to figure out how to apply Thomas's patch to the planet
flow, it might
help me to have a little detail on what YOU did to apply the
patch. given
that I'm semi smart, but have so little information, this might
help a great
deal. :)
slowly I learn - *chugga chugga*
I do not know how to apply the patch to a Planet flow box. I have placed the
HDSP 9652 in a Gentoo box as it's easier to patch Gentoo, which is source
code based, than a Planet box, which is RPM based.
However, Kevin Ernste was building Alsa RPMs. If you could talk him into
patching his source and then building the RPM you would just install that
RPM on your Planet box and be done. I think that's the best solution, but I
don't know how to do any of it myself. (I'm a dumb end-user type...) ;-)
Kevin responded to you yesterday.
- Mark
8:32 p.m.
I do not know how to apply the patch to a Planet flow
box. I have placed
the
HDSP 9652 in a Gentoo box as it's easier to patch
Gentoo, which is source
code based, than a Planet box, which is RPM based.
*a slightly confused look* - ohhhhh I'm beginning to get the picture...
However, Kevin Ernste was building Alsa RPMs. If you
could talk him into
patching his source and then building the RPM you would just install that
RPM on your Planet box and be done. I think that's the best solution, but
I
don't know how to do any of it myself. (I'm a
dumb end-user type...) ;-)
Kevin responded to you yesterday.
I remember - I wish I could find the response...lotso info to keep track of
*whew*
11:02 p.m.
However, Kevin ErErnsteas building AlAlsaPRPMsIf you
could talk him
into
patching his source and then building the RPM you would just install
that
RPM on your Planet box and be done. I think that's the best solution,
but I
don't know how to do any of it myself. (I'm a dumb end-user type...)
;-)
Kevin responded to you yesterday.
Sorry to be behind on messages here, long two teaching days. I just
dropped a note to Aaron, and I would be more than happy to help further
if I can.
It looks like Fernando may have trumped us all and released new rpms
today, so perhaps I'll see about patching those (has anyone tested them
yet, perhaps the problem is already solved?). That should gaguarantee
compatibility, thus preserving your planet "chi" :)
Kevin
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
11:19 p.m.
However, Kevin
ErErnsteas building AlAlsaPRPMsIf you could talk him
into patching his source and then building the RPM you would just install
that RPM on your Planet box and be done. I think that's the best solution,
but I don't know how to do any of it myself. (I'm a dumb end-user type...)
;-)
Kevin responded to you yesterday.
Sorry to be behind on messages here, long two teaching days. I just
dropped a note to Aaron, and I would be more than happy to help further
if I can.
It looks like Fernando may have trumped us all and released new rpms
today, so perhaps I'll see about patching those (has anyone tested them
yet, perhaps the problem is already solved?).
24 Sep
24 Sep
2:09 a.m.
_If_ the patches you are all so fired up about :-) are
in current CVS
I
could try building it and putting it in the planetedge repository.
Thanks, again (can we ever thank you enough, Fernando?). Here's the
Aug 27th patch that seems to be the point of interest, linked from a
correspondence on Alsa-devel.
http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg08857/hdsp9…
Here's the thread:
http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg08857.html
Kevin
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
23 Sep
23 Sep
10:49 p.m.
New subject: [linux-audio-user] MORE hdsp 9652! (building rpms for flow)
If I'm to figure out how to apply Thomas's
patch to the planet flow,
it might
help me to have a little detail on what YOU did to apply the patch.
given
that I'm semi smart, but have so little information, this might help
a great
deal. :)
In the case of the rpm's I built originally for Matt B, I used
Fernando's .spec files from the Planet src.rpms, editing them to point
to the more recent CVS sources I had downloaded, also cleaning out
references to patches which were no longer relavent. In this case you
could simply add an entry for the new patch in the spec, you will see
others there as syntax examplees.
Once you have the spec edited (in /usr/src/redhat/SPEC) and the sources
and patches in the right place (/usr/src/redhat/SOURCES), you should,
ideally, be able to just rebuild.
More info on that can be sound here:
http://ccrma-www.stanford.edu/planetccrma/software/recompilealsa.html
Kevin
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
24 Sep
24 Sep
3:42 a.m.
New subject: [linux-audio-user] MORE hdsp 9652! (building rpms for flow)
this helps a bunch - it looks like fernando's gonna beat me to it, which is
really cool, but this still helps, because the other half of the project for
me is learning...i mean boyo, a lot of learning, because I have never
touched linux, and it's been 10 years since I was any kind of a unix user :)
(I may have to skip a couple lunches and get a couple dummies books to lay
some better foundation)
thanks kevin!
----- Original Message -----
From: "kevin ernste" <kevinernste(a)yahoo.com>
To: <linux-audio-user(a)music.columbia.edu>
Sent: Tuesday, September 23, 2003 7:34 PM
Subject: Re: [linux-audio-user] MORE hdsp 9652! (building rpms for flow)
If I'm to figure out how to apply
Thomas's patch to the planet flow,
it might
help me to have a little detail on what YOU did to apply the patch.
given
that I'm semi smart, but have so little information, this might help
a great
deal. :)
In the case of the rpm's I built originally for Matt B, I used
Fernando's .spec files from the Planet src.rpms, editing them to point
to the more recent CVS sources I had downloaded, also cleaning out
references to patches which were no longer relavent. In this case you
could simply add an entry for the new patch in the spec, you will see
others there as syntax examplees.
Once you have the spec edited (in /usr/src/redhat/SPEC) and the sources
and patches in the right place (/usr/src/redhat/SOURCES), you should,
ideally, be able to just rebuild.
More info on that can be sound here:
http://ccrma-www.stanford.edu/planetccrma/software/recompilealsa.html
Kevin
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
7735
days inactive
7736
days old
linux-audio-user@lists.linuxaudio.org
7 comments
4 participants
participants (4)
-
Aaron Trumm -
Fernando Pablo Lopez-Lezcano -
kevin ernste -
Mark Knecht