10 Sep
2003
10 Sep
'03
10:06 a.m.
Hi!
Finaly I can run jackd and compile Adour.
But I can't run Ardour. I can see the splash screen, but Ardour killing
itself.
So:
# ardour
Ardour/GTK 0.380.1 running with libardour 0.686.3
Loading UI configuration file /usr/local/ardour/ardour_ui.rc
Loading system configuration file /usr/local/etc/ardour/ardour_system.rc
Loading user configuration file /usr/local/etc/ardour/ardour.rc
ardour: [WARNING]: MMC MIDI port "trident" not available: no MMC control
possible
343: received signal 4
ardour is killing itself for a clean exit
Killed
I don't get Ardour using CVS because I can't connect the cvsroot.
So, I get the file ardour_current-cvs.tar in the website of Ardour.
What is MIDI port "trident"? I haven't hardware trident, any, in my
computer.
The TODO file say: "don't initiate MIDI binding if there is no MMC
control".
Is it my answer?
But where I disable "MIDI binding"?
I don't make any change in the files *.rc
But after this error I remove any line about MMC or MIDI and I get the same
error.
Somebody can help me?
Thanks!
Alexander
10 Sep
10 Sep
11:31 a.m.
Hi,
--- Alexander <alexander(a)edem.g12.br> wrote:
Hi!
Finaly I can run jackd and compile Adour.
But I can't run Ardour. I can see the splash screen,
but Ardour killing
itself.
So:
# ardour
Ardour/GTK 0.380.1 running with libardour 0.686.3
Loading UI configuration file
/usr/local/ardour/ardour_ui.rc
Loading system configuration file
/usr/local/etc/ardour/ardour_system.rc
Loading user configuration file
/usr/local/etc/ardour/ardour.rc
ardour: [WARNING]: MMC MIDI port "trident" not
available: no MMC control
possible
343: received signal 4
ardour is killing itself for a clean exit
Killed
I don't get Ardour using CVS because I can't connect
the cvsroot.
So, I get the file ardour_current-cvs.tar in the
website of Ardour.
What is MIDI port "trident"? I haven't hardware
trident, any, in my computer.
Paul uses the settings for his hardware and
installation in the default ardour.rc file.
The TODO file say: "don't initiate MIDI
binding if
there is no MMC control".
Is it my answer?
I'd say yes.
But where I disable "MIDI binding"?
In the ardour.rc file.
I don't make any change in the files *.rc
But after this error I remove any line about MMC or
MIDI and I get the same
error.
You've probably got more than one ardour.rc file.
Perhaps a system wide and one for normaluser. If
you're editing ~/normaluser/ardour/.ardour.rc and
getting the above message it's because you're starting
ardour from the system wide ardour.rc.
Incidentally, there are ardour mailing lists.
ron
Somebody can help me?
Thanks!
Alexander
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
12:50 p.m.
Hi Alexander
you should post how you start jackd and post the output, too,
i'll make things easier for people to help you.
I doubt your problem has anything to do with the warning about the midi
setting.
regards.
Francisco
On Wed, 10 Sep 2003, Alexander wrote:
Hi!
Finaly I can run jackd and compile Adour.
But I can't run Ardour. I can see the splash screen, but Ardour killing
itself.
So:
# ardour
Ardour/GTK 0.380.1 running with libardour 0.686.3
Loading UI configuration file /usr/local/ardour/ardour_ui.rc
Loading system configuration file /usr/local/etc/ardour/ardour_system.rc
Loading user configuration file /usr/local/etc/ardour/ardour.rc
ardour: [WARNING]: MMC MIDI port "trident" not available: no MMC control
possible
343: received signal 4
ardour is killing itself for a clean exit
Killed
I don't get Ardour using CVS because I can't connect the cvsroot.
So, I get the file ardour_current-cvs.tar in the website of Ardour.
What is MIDI port "trident"? I haven't hardware trident, any, in my
computer.
The TODO file say: "don't initiate MIDI binding if there is no MMC
control".
Is it my answer?
But where I disable "MIDI binding"?
I don't make any change in the files *.rc
But after this error I remove any line about MMC or MIDI and I get the same
error.
Somebody can help me?
Thanks!
Alexander
1:35 p.m.
New subject: [linux-audio-user] Message AGAIN about Ardour(the last?)
I didn't understand well that you asked.
But I am beginning the jack is:
# jackd -d alsa -d hw:0
I created the file .asoundrc like:
pcm.via82xx {
type hw
card 0
}
ctl.via82xx {
type hw
card 0
}
i'll make things easier for people to help you.
THANK YOU!
I doubt your problem has anything to do with the
warning about the midi
setting.
Me too. :(
I swear that turned off all the line about midi and I also created corrctly
the ambient variables.
[]'s
Alexander
Brazil - Rio de Janeiro
regards.
Francisco
On Wed, 10 Sep 2003, Alexander wrote:
> Hi!
>
> Finaly I can run jackd and compile Adour.
>
> But I can't run Ardour. I can see the splash screen, but Ardour killing
> itself.
>
> So:
>
> # ardour
>
> Ardour/GTK 0.380.1 running with libardour 0.686.3
> Loading UI configuration file /usr/local/ardour/ardour_ui.rc
> Loading system configuration file /usr/local/etc/ardour/ardour_system.rc
> Loading user configuration file /usr/local/etc/ardour/ardour.rc
> ardour: [WARNING]: MMC MIDI port "trident" not available: no MMC control
> possible
> 343: received signal 4
> ardour is killing itself for a clean exit
> Killed
>
>
> I don't get Ardour using CVS because I can't connect the cvsroot.
>
> So, I get the file ardour_current-cvs.tar in the website of Ardour.
>
> What is MIDI port "trident"? I haven't hardware trident, any, in my
> computer.
>
> The TODO file say: "don't initiate MIDI binding if there is no MMC
> control".
>
> Is it my answer?
>
> But where I disable "MIDI binding"?
>
> I don't make any change in the files *.rc
>
> But after this error I remove any line about MMC or MIDI and I get the
> same error.
>
> Somebody can help me?
>
> Thanks!
> Alexander
12 Sep
12 Sep
3:04 p.m.
New subject: [linux-audio-user] Message AGAIN about Ardour(the last?)
I didn't understand well that you asked.
But I am beginning the jack is:
# jackd -d alsa -d hw:0
I created the file .asoundrc like:
pcm.via82xx {
type hw
card 0
}
ctl.via82xx {
type hw
card 0
}
i'll make things easier for people to help you.
THANK YOU!
I doubt your problem has anything to do with the
warning about the midi
setting.
Me too. :(
I swear that turned off all the line about midi and I also created corrctly
the ambient variables.
[]'s
Alexander
Brazil - Rio de Janeiro
regards.
Francisco
On Wed, 10 Sep 2003, Alexander wrote:
> Hi!
>
> Finaly I can run jackd and compile Adour.
>
> But I can't run Ardour. I can see the splash screen, but Ardour killing
> itself.
>
> So:
>
> # ardour
>
> Ardour/GTK 0.380.1 running with libardour 0.686.3
> Loading UI configuration file /usr/local/ardour/ardour_ui.rc
> Loading system configuration file /usr/local/etc/ardour/ardour_system.rc
> Loading user configuration file /usr/local/etc/ardour/ardour.rc
> ardour: [WARNING]: MMC MIDI port "trident" not available: no MMC control
> possible
> 343: received signal 4
> ardour is killing itself for a clean exit
> Killed
>
>
> I don't get Ardour using CVS because I can't connect the cvsroot.
>
> So, I get the file ardour_current-cvs.tar in the website of Ardour.
>
> What is MIDI port "trident"? I haven't hardware trident, any, in my
> computer.
>
> The TODO file say: "don't initiate MIDI binding if there is no MMC
> control".
>
> Is it my answer?
>
> But where I disable "MIDI binding"?
>
> I don't make any change in the files *.rc
>
> But after this error I remove any line about MMC or MIDI and I get the
> same error.
>
> Somebody can help me?
>
> Thanks!
> Alexander
7583
days inactive
7585
days old
linux-audio-user@lists.linuxaudio.org
4 comments
3 participants
participants (3)
-
Alexander -
foltraļ¼ terra.cl -
R Parker