Hi, i have a rme hdsp madi card running and was wondering if i could make use of the midi ports in it to gain control to some functions. qjackctl does not shows my audio ports and not my midi ports when jack is running. is this normal? i would have expected to see my raw midi ports in the connections window.... my card is running fine otherwise... heres some output: vst:/mnt/testsuite # cat /proc/asound/cards 0 [default ]: HDSPM - HDSPM MADI RME HDSPM MADI at 0xd0200000, irq 11 vst:/mnt/testsuite # cat /proc/asound/devices 4: [0- 0]: hardware dependent 9: [0- 1]: raw midi 8: [0- 0]: raw midi 16: [0- 0]: digital audio playback 24: [0- 0]: digital audio capture 0: [0- 0]: ctl 1: : sequencer 33: : timer vst:/mnt/testsuite # amidi -l Device Name hw:0,0 MIDI 1 hw:0,1 MIDI 2 !!!!!BUT: aconnect does not show any writable or readable midi sources vst:/mnt/testsuite # aconnect -i -o client 0: 'System' [type=kernel] 0 'Timer ' 1 'Announce ' could this be a driver problem or am i missing something here? i've never worked with midi under linux so any help would be greatly apreciated. thanks and cheers, Benjamin -- ------------------- Benjamin Fabricius German Student Lawo AG