19 May
2008
19 May
'08
11:02 a.m.
Hi there,
I asked some companies to support jacklab with hardware for testing and
probing... now m-audio lend me a nvr10 which is a firewire audio mixer
-a cool device I think. My expectation was - plug and mix. ("reported to
work" on the ffado website)
I never used an fw audio device before on Linux - and have no idea how
to get it work. gscanbus say there is an error by reading the bus...
Yes I know qjackctl -I think the prob is much deeper -or I'm blind to
find the easiest way?
Any hints?
--
Mit freundlichen Grüßen
Michael Bohle
Vorsitzender
jacklab e.V.
D-27572 Bremerhaven | Am Baggerloch 20
Phone/Fax: +49-471-7004937
Mail: opendaw(a)jacklab.org
www: http://jacklab.org
Bürozeiten: Mo. - Fr. 12:00 - 18:00 Uhr
und nach Vereinbarung
19 May
19 May
2:13 p.m.
Am Mon, 19 May 2008 15:02:06 +0200
schrieb Michael Bohle <opendaw(a)jacklab.org>rg>:
Hi there,
I asked some companies to support jacklab with hardware for testing
and probing... now m-audio lend me a nvr10 which is a firewire audio
mixer -a cool device I think. My expectation was - plug and mix.
("reported to work" on the ffado website)
I never used an fw audio device before on Linux - and have no idea how
to get it work. gscanbus say there is an error by reading the bus...
Yes I know qjackctl -I think the prob is much deeper -or I'm blind to
find the easiest way?
Any hints?
Answering myself:
Use JAD (openSUSE) then you have the OOTB experience. First I've tested
with 64studio, but it didn't work for unknown reasons, surly my mistake.
3ms with Freebob/JACK, thx to FFADO for supporting the poor
sound devices industry ;)
--
Mit freundlichen Grüßen
Michael Bohle
Vorsitzender
jacklab e.V.
D-27572 Bremerhaven | Am Baggerloch 20
Phone/Fax: +49-471-7004937
Mail: opendaw(a)jacklab.org
www: http://jacklab.org
Bürozeiten: Mo. - Fr. 12:00 - 18:00 Uhr
und nach Vereinbarung
3:04 p.m.
Michael Bohle wrote:
Am Mon, 19 May 2008 15:02:06 +0200
schrieb Michael Bohle <opendaw(a)jacklab.org>rg>:
It would be nice if you could use the channel you seem to have
established with m-audio to help the FFADO project. We don't seem to be
able to get to the right people. As a result there is not a single
M-Audio device that is supported by FFADO.
Greets,
Pieter Palmers
FFADO Developer
Hi there,
I asked some companies to support jacklab with hardware for testing
and probing... now m-audio lend me a nvr10 which is a firewire audio
mixer -a cool device I think. My expectation was - plug and mix.
("reported to work" on the ffado website)
I never used an fw audio device before on Linux - and have no idea how
to get it work. gscanbus say there is an error by reading the bus...
Yes I know qjackctl -I think the prob is much deeper -or I'm blind to
find the easiest way?
Any hints?
Answering myself:
Use JAD (openSUSE) then you have the OOTB experience. First I've tested
with 64studio, but it didn't work for unknown reasons, surly my mistake.
3ms with Freebob/JACK, thx to FFADO for supporting the poor
sound devices industry ;)
6177
days inactive
6177
days old
linux-audio-user@lists.linuxaudio.org
2 comments
2 participants
participants (2)
-
Michael Bohle -
Pieter Palmers