10 Jun
2011
10 Jun
'11
12:07 p.m.
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
Regards,
Ralf
10 Jun
10 Jun
12:31 p.m.
On Fri, Jun 10, 2011 at 6:07 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
Regards,
Ralf
This is not even a pulseaudio issue if its not installed, when jack
takes control of the sound card nothing else can play. Nothing to do
with PA.
12:59 p.m.
On Fri, 2011-06-10 at 18:31 +0800, Oon-Ee Ng wrote:
On Fri, Jun 10, 2011 at 6:07 PM, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
Ok, thanks. But for old Linux installs I did not have this issue. 64
Studio of cause is tailor-made, but Suse did not cause this issue too,
before there was PA.
Regards,
Ralf
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
Regards,
Ralf
This is not even a pulseaudio issue if its not installed, when jack
takes control of the sound card nothing else can play. Nothing to do
with PA. 
12:36 p.m.
On 10 June 2011 11:07, Ralf Mardorf <ralf.mardorf(a)alice-dsl.net> wrote:
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
Regards,
Ralf
As Oon-Ee Ng mentions, it's a jack issue.
The most basic method which works for me, is creating ~/.asoundrc with
the following contents:
---8<----
pcm.!default {
type plug
slave { pcm "jack" }
}
pcm.jack {
type jack
playback_ports {
0 alsa_pcm:playback_1
1 alsa_pcm:playback_2
}
capture_ports {
0 alsa_pcm:capture_1
1 alsa_pcm:capture_2
}
}
ctl.mixer0 {
type hw
card 0
}
---8<----
others might have other methods which might be better or not.
James.
1 p.m.
On Fri, 2011-06-10 at 11:36 +0100, James Morris wrote:
On 10 June 2011 11:07, Ralf Mardorf
<ralf.mardorf(a)alice-dsl.net> wrote:
Thank you very much :)
Ralf
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
Regards,
Ralf
As Oon-Ee Ng mentions, it's a jack issue.
The most basic method which works for me, is creating ~/.asoundrc with
the following contents:
---8<----
pcm.!default {
type plug
slave { pcm "jack" }
}
pcm.jack {
type jack
playback_ports {
0 alsa_pcm:playback_1
1 alsa_pcm:playback_2
}
capture_ports {
0 alsa_pcm:capture_1
1 alsa_pcm:capture_2
}
}
ctl.mixer0 {
type hw
card 0
}
---8<----
others might have other methods which might be better or not.
James. 
12:42 p.m.
On 06/10/2011 12:07 PM, Ralf Mardorf wrote:
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Hello Ralf,
That was me.
Yes, getting rid of PA, while it's still
impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
If you want to use Flash with JACK (or set up a system without PA) you
have several options:
- libflashsupport-jack: http://repo.or.cz/w/libflashsupport-jack.git
- alsa-jack plug-in: http://alsa.opensrc.org/Jack_%28plugin%29
- ALSA snd-aloop module:
http://alsa.opensrc.org/Jack_and_Loopback_device_as_Alsa-to-Jack_bridge
- pulseaudio-jack module, but since you don't want to use PA this is no
option
Best,
Jeremy
Regards,
Ralf
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
12:58 p.m.
On Fri, Jun 10, 2011 at 6:42 AM, Jeremy Jongepier <jeremy(a)autostatic.com> wrote:
If you want to use Flash with JACK (or set up a
system without PA) you
have several options:
- libflashsupport-jack: http://repo.or.cz/w/libflashsupport-jack.git
- alsa-jack plug-in: http://alsa.opensrc.org/Jack_%28plugin%29
- ALSA snd-aloop module:
http://alsa.opensrc.org/Jack_and_Loopback_device_as_Alsa-to-Jack_bridge
- pulseaudio-jack module, but since you don't want to use PA this is no
option
and more generally:
http://jackaudio.org/faq
1:07 p.m.
On Fri, 2011-06-10 at 06:58 -0400, Paul Davis wrote:
On Fri, Jun 10, 2011 at 6:42 AM, Jeremy Jongepier
<jeremy(a)autostatic.com> wrote:
That's it, thank you Paul :)
Ralf
If you want to use Flash with JACK (or set up a
system without PA) you
have several options:
- libflashsupport-jack: http://repo.or.cz/w/libflashsupport-jack.git
- alsa-jack plug-in: http://alsa.opensrc.org/Jack_%28plugin%29
- ALSA snd-aloop module:
http://alsa.opensrc.org/Jack_and_Loopback_device_as_Alsa-to-Jack_bridge
- pulseaudio-jack module, but since you don't want to use PA this is no
option
and more generally:
http://jackaudio.org/faq
1:04 p.m.
On Fri, 2011-06-10 at 12:42 +0200, Jeremy Jongepier wrote:
On 06/10/2011 12:07 PM, Ralf Mardorf wrote:
Thank you :)
and I didn't test anything else, so e.g. gstreamer etc. will work, as
long as it's configured to use ALSA, even if jackd runs?
Anyway, it's not that important.
I just fear that PA relics are left.
Regards,
Ralf
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Hello Ralf,
That was me.
Yes, getting rid of PA, while it's still
impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
If you want to use Flash with JACK (or set up a system without PA) you
have several options:
- libflashsupport-jack: http://repo.or.cz/w/libflashsupport-jack.git
- alsa-jack plug-in: http://alsa.opensrc.org/Jack_%28plugin%29
- ALSA snd-aloop module:
http://alsa.opensrc.org/Jack_and_Loopback_device_as_Alsa-to-Jack_bridge
- pulseaudio-jack module, but since you don't want to use PA this is no
option
1:07 p.m.
On 06/10/2011 01:04 PM, Ralf Mardorf wrote:
and I didn't test anything else, so e.g. gstreamer
etc. will work, as
long as it's configured to use ALSA, even if jackd runs?
You'll have to check the link Paul Davis provided first, it contains
information on how to set up GStreamer.
Best,
Jeremy
11 Jun
11 Jun
8:51 a.m.
Ralf Mardorf wrote:
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
My laptop doesn't have PA installed, never did, and audio works. I've
never been able to make Flash use JACK, though, so I use Download Helper
in FF to download the YouTube video, then play it through JACK using
mplayer ...
--
David
gnome(a)hawaii.rr.com
authenticity, honesty, community
9:11 a.m.
On Fri, 2011-06-10 at 20:51 -1000, david wrote:
Ralf Mardorf wrote:
Didn't http://jackaudio.org/faq work?
Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
My laptop doesn't have PA installed, never did, and audio works. I've
never been able to make Flash use JACK, though, so I use Download Helper
in FF to download the YouTube video, then play it through JACK using
mplayer ...
9:23 a.m.
Ralf Mardorf wrote:
On Fri, 2011-06-10 at 20:51 -1000, david wrote:
When I get around to doing it, I'm sure one method or the other will. I
haven't tried any of them yet, because I'm not the interested in YouTube
videos in the first place.
--
David
gnome(a)hawaii.rr.com
authenticity, honesty, community
Ralf Mardorf wrote:
Didn't http://jackaudio.org/faq work? Hi,
for my Debian there's no PA installed, but anyway, when I run jackd and
try to get sound for a Youtube video, there's no sound. I need to stop
jackd and then I can hear the sound of the video.
Some time ago somebody wrote that it should be easy to get rid of PA,
while I claimed, that it's hard to do.
Yes, getting rid of PA, while it's still impossible to use non-jack
applications is easy. Yes, for the browser there might be flash with
jackd support, but I would like to have a good old Linux, where I don't
need to take care about this Pulseaudio configurations.
Is it possible to get rid of any PA issues?
My laptop doesn't have PA
installed, never did, and audio works. I've
never been able to make Flash use JACK, though, so I use Download Helper
in FF to download the YouTube video, then play it through JACK using
mplayer ...
4903
days inactive
4904
days old
linux-audio-user@lists.linuxaudio.org
12 comments
6 participants
participants (6)
-
david -
James Morris -
Jeremy Jongepier -
Oon-Ee Ng -
Paul Davis -
Ralf Mardorf