31 Jul
2003
31 Jul
'03
10:33 a.m.
Hi guys!
In the last days had some nice experience with terminatorX. I think it works
well, but I don't know if the scratching is working correct.
I started scratching and noticed, that the soundfile is played only forwards
whatever direction the mouse is moved. When I set the "mouse speed" to a
negative value soundfiles are always played backwards when scratching
(holding the left mousebutton or pressing the "space"-key).
Is it possible to play the soundfile in two directions?
For example:
mouse moving upwards while scratching -> playing forward
mouse moving downwards while scratching -> playing backward
Like a real turntable :)
Thanks for any suggestions!
Friendly regards,
Rainer (rainer.poisel(a)kstp.net)
31 Jul
31 Jul
12:20 p.m.
On Thu, 31 Jul 2003 14:19:26 +0200
Rainer wrote:
Is it possible to play the soundfile in two directions?
I had this problem recently when I got the new tX version. Make sure that that
xfree86-dga extention is being loaded. You will most likely find that in
/etc/X11/XF86Config. Make sure you have:
In Section "Module":
SubSection "extmod"
and that the following line, if present, is commented:
# Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
After this tX should scratch fine.
-- ./MiS
_
__ __ (_)___ Michal Seta
/ \/ \ _/^ _|
/ V |_ \ @creazone.32k.org
(___/V\___|_|___/
http://www.[creazone]|[noonereceiving].32k.org
4:17 p.m.
New subject: [linux-audio-user] how to send program change in MusE and Rosegarden?
I've just begun messing around with using these MIDI apps to interact
with outboard devices (Yamaha keyboard, Boss drum machine, and Flextone
guitar amp), but can't find a way to have a single track sequence
contain multiple program change codes.
Looking at program documentation and other MIDI information failed to
turn up anything applicable, or called "insert program change" as I
would expect. Master Track edit in MusE is also a mystery.
Any advice on how to do this, or where to look for information?
Thanks!
Frank
4:52 p.m.
New subject: [linux-audio-user] how to send program change in MusE and Rosegarden?
On Jueves, 31 de Julio de 2003 19:09, fpirrone wrote:
I've just begun messing around with using these
MIDI apps to interact
with outboard devices (Yamaha keyboard, Boss drum machine, and Flextone
guitar amp), but can't find a way to have a single track sequence
contain multiple program change codes.
Looking at program documentation and other MIDI information failed to
turn up anything applicable, or called "insert program change" as I
would expect. Master Track edit in MusE is also a mystery.
Any advice on how to do this, or where to look for information?
Thanks!
Frank
In the list editor insert a Meta Event ....
C0 ProgNumber for Midi Channel 1
C1 ProgNumber for Midi Channel 2
.
.
.
.
.
Regards
Josep
5:26 p.m.
New subject: [linux-audio-user] how to send program change in MusE and Rosegarden?
holborn wrote:
On Jueves, 31 de Julio de 2003 19:09, fpirrone wrote:
Awesome, Josep. I was at that dialog but didn't know what to enter.
Where did you find this information?
Also, do you know how to do this in Rosegarden? There doesn't appear to
be an insert option.
Thanks again!
Frank
I've just begun messing around with using
these MIDI apps to interact
with outboard devices (Yamaha keyboard, Boss drum machine, and Flextone
guitar amp), but can't find a way to have a single track sequence
contain multiple program change codes.
Looking at program documentation and other MIDI information failed to
turn up anything applicable, or called "insert program change" as I
would expect. Master Track edit in MusE is also a mystery.
Any advice on how to do this, or where to look for information?
Thanks!
Frank
In the list editor insert a Meta Event ....
C0 ProgNumber for Midi Channel 1
C1 ProgNumber for Midi Channel 2
.
.
.
.
.
Regards
Josep
5:42 p.m.
New subject: [linux-audio-user] how to send program change in MusE and Rosegarden?
On Thursday 31 July 2003 19:09, fpirrone wrote:
I've just begun messing around with using these
MIDI apps to interact
with outboard devices (Yamaha keyboard, Boss drum machine, and
Flextone guitar amp), but can't find a way to have a single track
sequence contain multiple program change codes.
I was about to describe how to do this in Rosegarden, but then I
realised that (I think, anyway) the feature was actually added after
the last stable release, so it's only in CVS (which is not particularly
stable right now). In versions up to and including the 0.9.1 release,
the only way to get program changes within a track is to record them
from a MIDI input.
For completeness sake: Rosegarden generally prefers to have one program
per track, with the program for a track being that associated with the
track in the instrument parameter box that can optionally be shown on
the left of the main window. In recent code you can insert program
changes as well, but so far only in the event-list editor. Open an
event list and select Insert Event, specifying the type "programchange"
with the channel and program you want.
Chris
7:20 p.m.
New subject: [linux-audio-user] how to send program change in MusE and Rosegarden?
Chris Cannam wrote:
On Thursday 31 July 2003 19:09, fpirrone wrote:
Thanks, Chris. I had come across a comment regarding this in
Rosegarden, but couldn't (obviously, since I'm not running the CVS, but
rather the 0.9.1 version) find any way to do it. I agree with the
convention of one instrument per track but wanted to actually control a
guitar effects processor with patch changes all from one track.
Keep up the great work. This program has a beautiful interface and is
quite stable and functional.
Sorry to have also sent you a message from the Contact link on
SorceForge, but I've been scrambling around all day trying to figure
this out. By the way, that Meta Events answer Josep shared with MusE
has not yet worked, so I contacted Werner for help. Absolutely nothing
came up in a search of MusE + "event editor" or MusE + "meta event"
(as
was also the case with my Rosegarden search) so I had to wimp out and
beg once again.
Thanks for your time!
Frank
I've just begun messing around with using
these MIDI apps to interact
with outboard devices (Yamaha keyboard, Boss drum machine, and
Flextone guitar amp), but can't find a way to have a single track
sequence contain multiple program change codes.
I was about to describe how to do this in Rosegarden, but then I
realised that (I think, anyway) the feature was actually added after
the last stable release, so it's only in CVS (which is not particularly
stable right now). In versions up to and including the 0.9.1 release,
the only way to get program changes within a track is to record them
from a MIDI input.
For completeness sake: Rosegarden generally prefers to have one program
per track, with the program for a track being that associated with the
track in the instrument parameter box that can optionally be shown on
the left of the main window. In recent code you can insert program
changes as well, but so far only in the event-list editor. Open an
event list and select Insert Event, specifying the type "programchange"
with the channel and program you want.
Chris
7839
days inactive
7839
days old
linux-audio-user@lists.linuxaudio.org
6 comments
5 participants
participants (5)
-
Chris Cannam -
fpirrone -
holborn -
Michal Seta -
Rainer Poisel