18 Dec
2009
18 Dec
'09
10:29 a.m.
snip
Hi
I have break out the jconv settings gui from guitarix and make it available as
stand alone app.
It act as a (stereo) Host for jconv/jconvolver, to create/save/load/run
configuration files for the use with jconvolver.
Indeed this Gui didn't cover the full advance of jconv/jconvolver, but may be
the one or other found it useful.
Additional jcgui provide master gain, left/right gain, balance, left/right delay and
tone bass/middle/high controllers.
It's designed to use in realtime environment (jack) to processing data, not for apply
to a file.
get it here :
http://sourceforge.net/projects/jcgui/
have fun hermann
So with a free
impulse-response all should be well?
But why use a VST plugin under linux to apply an IR when there is already
jconvolver present?
*me wonders*
Arnold
Hi Arnold,
Some reasons come to this mind:
A functional GUI.
Better sound.
Choice.
I prefer the color yellow with my reverb's UI.
VST plugins mean the world to me.
Just some possible answers to your question. They are not necessarily
valid, true, or believable, they're just possible replies.
HTH,
dp
18 Dec
18 Dec
2:42 p.m.
Great job!!
I'm using right now and its a awsome tool!!
Is there any chance of building it as a lv2 plugin ? Is there difficult ?
Thanks a lot for sharing!!
Daniel D2 Roviriego
2009/12/18 hermann <brummer-(a)web.de>
snip
Hi
I have break out the jconv settings gui from guitarix and make it available
as
stand alone app.
It act as a (stereo) Host for jconv/jconvolver, to create/save/load/run
configuration files for the use with jconvolver.
Indeed this Gui didn't cover the full advance of jconv/jconvolver, but may
be
the one or other found it useful.
Additional jcgui provide master gain, left/right gain, balance, left/right
delay and
tone bass/middle/high controllers.
It's designed to use in realtime environment (jack) to processing data, not
for apply
to a file.
get it here :
http://sourceforge.net/projects/jcgui/
have fun hermann
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
> So with a free impulse-response all should
be well?
>
> But why use a VST plugin under linux to apply an IR when there is
already
jconvolver present?
*me wonders*
Arnold
Hi Arnold,
Some reasons come to this mind:
A functional GUI.
Better sound.
Choice.
I prefer the color yellow with my reverb's UI.
VST plugins mean the world to me.
Just some possible answers to your question. They are not necessarily
valid, true, or believable, they're just possible replies.
HTH,
dp
19 Dec
19 Dec
12:10 a.m.
Thanks Daniel
I haven't look at the LV2 speck's, I have no Idea if it is possible or
not.
hermann
Am Freitag, den 18.12.2009, 16:42 -0200 schrieb Daniel Roviriego:
Great job!!
I'm using right now and its a awsome tool!!
Is there any chance of building it as a lv2 plugin ? Is there
difficult ?
Thanks a lot for sharing!!
Daniel D2 Roviriego
2009/12/18 hermann <brummer-(a)web.de>
snip
necessarily
> So with a free impulse-response all should
be well?
>
> But why use a VST plugin under linux to apply an IR when
there is
already
jconvolver present?
*me wonders*
Arnold
Hi Arnold,
Some reasons come to this mind:
A functional GUI.
Better sound.
Choice.
I prefer the color yellow with my reverb's UI.
VST plugins mean the world to me.
Just some possible answers to your question. They are not valid, true, or believable, they're just
possible replies.
HTH,
dp
Hi
I have break out the jconv settings gui from guitarix and make
it available as
stand alone app.
It act as a (stereo) Host for jconv/jconvolver, to
create/save/load/run
configuration files for the use with jconvolver.
Indeed this Gui didn't cover the full advance of
jconv/jconvolver, but may be
the one or other found it useful.
Additional jcgui provide master gain, left/right gain,
balance, left/right delay and
tone bass/middle/high controllers.
It's designed to use in realtime environment (jack) to
processing data, not for apply
to a file.
get it here :
http://sourceforge.net/projects/jcgui/
have fun hermann
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
8:02 a.m.
On Fri, Dec 18, 2009 at 04:42:17PM -0200, Daniel Roviriego wrote:
Great job!!
I'm using right now and its a awsome tool!!
Is there any chance of building it as a lv2 plugin ? Is there difficult ?
I will require some 'extensions' that no host supports ATM.
Using the convolution library that comes with hybridreverb
should be easier, and for the case of a simple stereo or
surround reverb it will work nicely.
Ciao,
--
FA
18 Dec
18 Dec
9:16 p.m.
Od: hermann <brummer-(a)web.de>
Hi,
testing here you jcgui and having this output here:
--------------------------
$ Jc_Gui
Preset List Building *** 0 presets found
Jack init *** The jack sample rate is 44100/sec
Jack init *** The jack buffer size is 256/frames ...
Jack Server *** Connected to Jack Server
(Jc_Gui:12446): GLib-GObject-WARNING **: specified class size for type `GtkWaveView'
is smaller than the parent type's `GtkButton' class size
(Jc_Gui:12446): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT
(object_type)' failed
(Jc_Gui:12446): Gtk-CRITICAL **: gtk_widget_set_sensitive: assertion `GTK_IS_WIDGET
(widget)' failed
(Jc_Gui:12446): GLib-GObject-WARNING **: specified class size for type `GtkWaveView'
is smaller than the parent type's `GtkButton' class size
signal_handler *** signal 11 received, exiting ...
(Jc_Gui:12446): Gtk-CRITICAL **: gtk_main_quit: assertion `main_loops != NULL' failed
no message buffer overruns
-------------------------------------
regards
mira
11:59 p.m.
Hi
please make a fresh download, unfortunately I have upload the wrong
source first.
hermann
Am Samstag, den 19.12.2009, 02:16 +0100 schrieb Jaromír Mikeš:
Od: hermann
<brummer-(a)web.de>
Hi,
testing here you jcgui and having this output here:
--------------------------
$ Jc_Gui
Preset List Building *** 0 presets found
Jack init *** The jack sample rate is 44100/sec
Jack init *** The jack buffer size is 256/frames ...
Jack Server *** Connected to Jack Server
(Jc_Gui:12446): GLib-GObject-WARNING **: specified class size for type `GtkWaveView'
is smaller than the parent type's `GtkButton' class size
(Jc_Gui:12446): GLib-GObject-CRITICAL **: g_object_new: assertion `G_TYPE_IS_OBJECT
(object_type)' failed
(Jc_Gui:12446): Gtk-CRITICAL **: gtk_widget_set_sensitive: assertion `GTK_IS_WIDGET
(widget)' failed
(Jc_Gui:12446): GLib-GObject-WARNING **: specified class size for type `GtkWaveView'
is smaller than the parent type's `GtkButton' class size
signal_handler *** signal 11 received, exiting ...
(Jc_Gui:12446): Gtk-CRITICAL **: gtk_main_quit: assertion `main_loops != NULL'
failed
no message buffer overruns
-------------------------------------
regards
mira
19 Dec
19 Dec
9:32 a.m.
Od: hermann <brummer-(a)web.de>
Hi
please make a fresh download, unfortunately I have upload the wrong
source first.
hermann
Hi,
now I can see GUI for a while, than app crash.
Debian amd64 here:
----------------
$ Jc_Gui
Preset List Building *** 0 presets found
Jack init *** The jack sample rate is 44100/sec
Jack init *** The jack buffer size is 256/frames ...
Jack Server *** Connected to Jack Server
/usr/bin/jconvolver
JConv Start / Stop *** Started JConv, PID = 2803
signal_handler *** signal 11 received, exiting ...
no message buffer overruns
----------------
regards
mira
20 Dec
20 Dec
2:23 a.m.
It's a break out from the guitarix source, didn't create it from
scratch. I notice some smaller probs witch I have fix now, didn't know
if the shot down you get is all-ready fixed in it, I have setup a SVN
repository were the newest source is available/readable
http://jcgui.svn.sourceforge.net/viewvc/jcgui/
regards hermann
Am Samstag, den 19.12.2009, 14:31 +0100 schrieb Jaromír Mikeš:
now I can see GUI for a while, than app crash.
Debian amd64 here:
----------------
$ Jc_Gui
Preset List Building *** 0 presets found
Jack init *** The jack sample rate is 44100/sec
Jack init *** The jack buffer size is 256/frames ...
Jack Server *** Connected to Jack Server
/usr/bin/jconvolver
JConv Start / Stop *** Started JConv, PID = 2803
signal_handler *** signal 11 received, exiting ...
no message buffer overruns
----------------
regards
mira
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
10:49 p.m.
Od: hermann <brummer-(a)web.de>
----------------------------------------
It's a break out from the guitarix source, didn't create it from
scratch. I notice some smaller probs witch I have fix now, didn't know
if the shot down you get is all-ready fixed in it, I have setup a SVN
repository were the newest source is available/readable
http://jcgui.svn.sourceforge.net/viewvc/jcgui/
regards hermann
Hi,
works nicely now (latest SVN) thank you for your work.
Few suggestion for further development:
- knobs are quite small for precise setting
(possibility click value and insert it from keyboard directly would be great)
- knobs also allow decrease value to minimum and than continue and jump to maximum
- jconv settings included in stored preset would be nice, if there is no good reason not
to do it.
again ... great work many thanks for it
regards
mira
21 Dec
21 Dec
11:44 a.m.
Am Montag, den 21.12.2009, 03:49 +0100 schrieb Jaromír Mikeš:
Hi,
works nicely now (latest SVN) thank you for your work.
Few suggestion for further development:
- knobs are quite small for precise setting
(possibility click value and insert it from keyboard directly would be great)
- knobs also allow decrease value to minimum and than continue and jump to maximum
- jconv settings included in stored preset would be nice, if there is no good reason not
to do it.
again ... great work many thanks for it
regards
mira
Hi mira
Thanks for response, . .
to 1.) yea, good Idea, will add a editable num display for that
2.) yes, they follow the mouse,make just a little jump when you turn
over zero.
3.) they did, a peset is a session, when you change the IR file in a
preset session, it will immediately save to the preset. You need to go
back to Main settings, or open a new preset handler befor you change,
for testing a new IR file. I, normal, save presets when jconvolver is
running, this way jconvolver starts direct when I load a preset. Switch
to a other preset will stop the running jconvolver and start it
immediately with the new file.
All config files will saved in ~./Jc_Gui
regards hermann
19 Dec
19 Dec
10:15 a.m.
On Fri, Dec 18, 2009 at 03:29:04PM +0100, hermann wrote:
get it here :
http://sourceforge.net/projects/jcgui/
(Jc_Gui:1592): GVFS-RemoteVolumeMonitor-WARNING **: invoking IsSupported() failed for
remote volume monitor with dbus name org.gtk.Private.GPhoto2VolumeMonitor:
org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program
/usr/libexec/gvfs-gphoto2-volume-monitor: Success
Wave view expose *** nofile cannot be exposed
Preset Switching *** Preset list is empty, make some :)
Why is this thing trying to load pictures from my camera ?
--
FA
10:32 a.m.
Am Samstag, den 19.12.2009, 15:11 +0100 schrieb fons(a)kokkinizita.net:
On Fri, Dec 18, 2009 at 03:29:04PM +0100, hermann
wrote:
?? I have no Idea ??
It load some pixmaps, but don't from your camera.
Witch Gtk version is it ?
get it here :
http://sourceforge.net/projects/jcgui/
(Jc_Gui:1592): GVFS-RemoteVolumeMonitor-WARNING **: invoking IsSupported() failed for
remote volume monitor with dbus name org.gtk.Private.GPhoto2VolumeMonitor:
org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program
/usr/libexec/gvfs-gphoto2-volume-monitor: Success
Wave view expose *** nofile cannot be exposed
Preset Switching *** Preset list is empty, make some :)
Why is this thing trying to load pictures from my camera ?
20 Dec
20 Dec
1:22 a.m.
Am Samstag, den 19.12.2009, 15:11 +0100 schrieb fons(a)kokkinizita.net:
On Fri, Dec 18, 2009 at 03:29:04PM +0100, hermann
wrote:
Sadly I notice that it seems you don't like this Gui solution for your
excellent convolver engine. To bad. :-(
Anyway, to make it clear, this "thing", didn't try to load a picture
from your camera, and, it can't do that. All used pixmaps coming with
the source and will load during init, or create by a function.
So, what's going on ? The GtkFileChooser, included in the Settings
widget, scan your PC for available devices, and try to look on them.
The GtkFileChooser try to look on the device, in this cases your camera,
but only for *.wav files to use.
that's a routine included in GTK.
regards hermann
get it here :
http://sourceforge.net/projects/jcgui/
(Jc_Gui:1592): GVFS-RemoteVolumeMonitor-WARNING **: invoking IsSupported() failed for
remote volume monitor with dbus name org.gtk.Private.GPhoto2VolumeMonitor:
org.freedesktop.DBus.Error.Spawn.ExecFailed: Failed to execute program
/usr/libexec/gvfs-gphoto2-volume-monitor: Success
Wave view expose *** nofile cannot be exposed
Preset Switching *** Preset list is empty, make some :)
Why is this thing trying to load pictures from my camera ?
5495
days inactive
5498
days old
linux-audio-user@lists.linuxaudio.org
12 comments
4 participants
participants (4)
-
Daniel Roviriego -
fons＠kokkinizita.net -
hermann -
Jaromír Mikeš