So there's not really any way to trick/force alsa into going through jack
(or freebob)? Or is there something like that in production?
On Thu, Feb 21, 2008 at 3:10 PM, Pieter Palmers <pieterp(a)joow.be> wrote:
Steel Side wrote:
Wow, great! It works!
here's the jack_lsp anyway:
[daniel@dyx ~]$ jack_lsp
JACK tmpdir identified as [/dev/shm]
Enhanced3DNow! detected
SSE2 detected
freebob_pcm:dev1c_Line_1/2 left PHASE X24 FW
freebob_pcm:dev1c_Line_1/2 right PHASE X24 FW
freebob_pcm:dev1c_SPDIF left PHASE X24 FW
freebob_pcm:dev1c_SPDIF right PHASE X24 FW
freebob_pcm:dev1p_Multichannel 1 PHASE X24 FW
freebob_pcm:dev1p_Multichannel 2 PHASE X24 FW
freebob_pcm:dev1p_Multichannel 3 PHASE X24 FW
freebob_pcm:dev1p_Multichannel 4 PHASE X24 FW
Now, as this works, i want to progress. Is there anyway i can make
everything go out standard through my fw card?
And the no application at all as in -> i only had hydrogen, mplayer and
totem to test with atm, and none of them wanted to send it to my fw card
(well, totem and mplayer has not been so kind to even include a jack
option, and the alsa one did not send through my fw card.)
What i basically want is equal or better performance than what i had on
windows (which, judging from jack and hydrogen, sure is possible for the
more advanced applications at least), but a vital point would be that i
could have every application go through my fw card, instead of the
builtin one.
At the moment you can only use jack-enabled applications.
Greets,
Pieter
Grateful for your help,
yours,
Daniel
On Tue, Feb 19, 2008 at 9:41 PM, Pieter Palmers <pieterp(a)joow.be
<mailto:pieterp@joow.be>> wrote:
Steel Side wrote:
Heya, been looking for some days now for a fix to
my problem - no
application wants to output to my phase x24 fw soundcard.
When i posted about it is was linked to this mailing list :)
do you mean "no application at all" or is it a more limited set (e.g
.
hydrogen only)?
...
>
> From that i think it looks OK(but then I'm new to this), (except
for
> the warnings, i don't know where
they are from, and google
wouldn't
enlighten
me)
The warnings are not important.
what does "jack_lsp" return?
>
> However, when starting hydrogen i get this up my face (when i
select
JACK as
output driver):
Error starting audio driver
Jack driver: cannot connect output port.
I suspect that this is an autoconnect issue. It's not really a
jack/freebob issue, but is misbehavior of the application.
In case of hydrogen, try the following:
* click away the error dialogs
* go to file->preferences
* go to the "Audio System" tab
* unselect the "Connect to default output..." checkbox
* press ok
* restart hydrogen
Now go to qjackctl and manually connect the hydrogen ports to the
soundcard ports.
This should work.
....
Sorry if this message is bloated, but i believe in more
information than
too little.
That's a respected attitude around here.
Greets,
Pieter
--
//Cincerly SteelSide
//Mvh Daniel