16 Feb
2008
16 Feb
'08
1:09 p.m.
I have another question about the Multiface II -- it's all setup,
works perfectly without any configuration on my part, using
PlanetCCRMA on Fedora 7, but the L/R panning seems a bit strange (the
same machine dual boots to Windows, and the issue is there also).
Everything is at default settings, when I pan things hard left,
everything is panned hard left as expected. When I pan hard right, I
don't get hard right audio, everything seems to be 'in the middle'
(mono) but still playing through both monitors. I have the Multiface
outputs 1 & 2 going into my S/W which goes to each monitor (M-Audio
monitors). I see this issue regardless of what application I am using,
and using the TotalMix tool also, I can't seem to get anything to pan
hard right.
(BTW, Joe, the dead 1010 is on its way)
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
16 Feb
16 Feb
2:01 p.m.
I Cannot speak to the MultiFace II specifically but on my HDSP9652 in
the upper and middle rows I pan all my odd channels hard left and all
my even channels hard right. My outputs are legion, headphones on
A3-5/6, mid-grade speaker set 1 on A3-7/8 and studio monitors on
SP-L/R. I can pan hard left by taking an even channel and pushing it
left, and hard right by taking an odd channel and pushing it right.
Work for me.
There could be issues, I suppose, with the MF-II that don't shw up in
the HDSP. wouldn't know about that. sorry.
Hope this helps,
Mark
On Feb 16, 2008 9:09 AM, Brett McCoy <idragosani(a)gmail.com> wrote:
I have another question about the Multiface II --
it's all setup,
works perfectly without any configuration on my part, using
PlanetCCRMA on Fedora 7, but the L/R panning seems a bit strange (the
same machine dual boots to Windows, and the issue is there also).
Everything is at default settings, when I pan things hard left,
everything is panned hard left as expected. When I pan hard right, I
don't get hard right audio, everything seems to be 'in the middle'
(mono) but still playing through both monitors. I have the Multiface
outputs 1 & 2 going into my S/W which goes to each monitor (M-Audio
monitors). I see this issue regardless of what application I am using,
and using the TotalMix tool also, I can't seem to get anything to pan
hard right.
(BTW, Joe, the dead 1010 is on its way)
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
2:05 p.m.
On Feb 16, 2008 1:01 PM, Mark Knecht <markknecht(a)gmail.com> wrote:
I Cannot speak to the MultiFace II specifically but on
my HDSP9652 in
the upper and middle rows I pan all my odd channels hard left and all
my even channels hard right. My outputs are legion, headphones on
A3-5/6, mid-grade speaker set 1 on A3-7/8 and studio monitors on
SP-L/R. I can pan hard left by taking an even channel and pushing it
left, and hard right by taking an odd channel and pushing it right.
Work for me.
OK, I'll experiment with the outputs. Ultimately, I need to have two
outs for the monitors and 2 (or more) for the headphone amp. I had the
exact same setup for the Delta1010 and it worked great (although the
RME seems to sound a little cleaner through the headphones).
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
2:20 p.m.
On Feb 16, 2008 1:05 PM, Brett McCoy <idragosani(a)gmail.com> wrote:
On Feb 16, 2008 1:01 PM, Mark Knecht
<markknecht(a)gmail.com> wrote:
By default, my setup is exactly what you describe, 1, 3, 5, 7 are hard
left, 2, 4, 6, 8 are hard right. Muting channel 1, I get a mono sound
through both speakers that sounds 'in the middle' (which is not
correct). Muting channel 2, I only get audio out of the left channel
(which is correct).
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
I Cannot speak to the MultiFace II specifically
but on my HDSP9652 in
the upper and middle rows I pan all my odd channels hard left and all
my even channels hard right. My outputs are legion, headphones on
A3-5/6, mid-grade speaker set 1 on A3-7/8 and studio monitors on
SP-L/R. I can pan hard left by taking an even channel and pushing it
left, and hard right by taking an odd channel and pushing it right.
Work for me.
OK, I'll experiment with the outputs. Ultimately, I need to have two
outs for the monitors and 2 (or more) for the headphone amp. I had the
exact same setup for the Delta1010 and it worked great (although the
RME seems to sound a little cleaner through the headphones). 
2:44 p.m.
On Feb 16, 2008 7:20 PM, Brett McCoy <idragosani(a)gmail.com> wrote:
By default, my setup is exactly what you describe, 1,
3, 5, 7 are hard
left, 2, 4, 6, 8 are hard right. Muting channel 1, I get a mono sound
through both speakers that sounds 'in the middle' (which is not
correct). Muting channel 2, I only get audio out of the left channel
(which is correct).
Works fine here with Multiface II, PCMCIA bus card and alsa drivers
1.0.16. What are you using ?
__________________
Marc-Olivier Barre,
MarcO'Chapeau.
3:02 p.m.
On Feb 16, 2008 1:44 PM, Marc-Olivier Barre <marco(a)marcochapeau.org> wrote:
On Feb 16, 2008 7:20 PM, Brett McCoy
<idragosani(a)gmail.com> wrote:
I'm using the PCI interface. I think the problem is independent of any
drivers or OS, since I see the exact same issue on both Linux and
Windows.
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
By default, my setup is exactly what you
describe, 1, 3, 5, 7 are hard
left, 2, 4, 6, 8 are hard right. Muting channel 1, I get a mono sound
through both speakers that sounds 'in the middle' (which is not
correct). Muting channel 2, I only get audio out of the left channel
(which is correct).
Works fine here with Multiface II, PCMCIA bus card and alsa drivers
1.0.16. What are you using ?
6:59 p.m.
On Feb 16, 2008 8:02 PM, Brett McCoy <idragosani(a)gmail.com> wrote:
On Feb 16, 2008 1:44 PM, Marc-Olivier Barre
<marco(a)marcochapeau.org> wrote:
Ah, I got the part about windows wrong then. Do you also have the
problem when plugin headphones in the monitor port on the multiface ?
__________________
Marc-Olivier Barre,
MarcO'Chapeau.
On Feb 16, 2008 7:20 PM, Brett McCoy
<idragosani(a)gmail.com> wrote:
I'm using the PCI interface. I think the problem is independent of any
drivers or OS, since I see the exact same issue on both Linux and
Windows. By default, my setup is exactly what you
describe, 1, 3, 5, 7 are hard
left, 2, 4, 6, 8 are hard right. Muting channel 1, I get a mono sound
through both speakers that sounds 'in the middle' (which is not
correct). Muting channel 2, I only get audio out of the left channel
(which is correct).
Works fine here with Multiface II, PCMCIA bus card and alsa drivers
1.0.16. What are you using ?
7:39 p.m.
On Feb 16, 2008 5:59 PM, Marc-Olivier Barre <marco(a)marcochapeau.org> wrote:
Ah, I got the part about windows wrong then. Do you also have the
problem when plugin headphones in the monitor port on the multiface ?
That seems to be working correctly.
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
Works fine here with Multiface II, PCMCIA bus card and
alsa drivers
1.0.16. What are you using ?
I'm using the PCI interface. I think the problem is independent of any
drivers or OS, since I see the exact same issue on both Linux and
Windows. 
2:54 p.m.
On Sat, 16 Feb 2008 12:09:57 -0500
"Brett McCoy" <idragosani(a)gmail.com> wrote:
(BTW, Joe, the dead 1010 is on its way)
UPS already sent me email letting me know :)
I'll be documenting both the capacitor replacement and the pairing of the
1010s, so this'll definitely be worth the effort. Thanks again.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa
3:02 p.m.
On Feb 16, 2008 1:52 PM, Joe Hartley <jh(a)brainiac.com> wrote:
On Sat, 16 Feb 2008 12:09:57 -0500
"Brett McCoy" <idragosani(a)gmail.com> wrote:
Cool! I am glad my loss has become a contribution to the music community!
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
(BTW, Joe, the dead 1010 is on its way)
UPS already sent me email letting me know :)
I'll be documenting both the capacitor replacement and the pairing of the
1010s, so this'll definitely be worth the effort. Thanks again.
17 Feb
17 Feb
1:52 p.m.
Solved the problem ... it was a stupid cabling problem, one of them
infamous PEBKAC kind of things. h-|
On Feb 16, 2008 12:09 PM, Brett McCoy <idragosani(a)gmail.com> wrote:
I have another question about the Multiface II --
it's all setup,
works perfectly without any configuration on my part, using
PlanetCCRMA on Fedora 7, but the L/R panning seems a bit strange (the
same machine dual boots to Windows, and the issue is there also).
Everything is at default settings, when I pan things hard left,
everything is panned hard left as expected. When I pan hard right, I
don't get hard right audio, everything seems to be 'in the middle'
(mono) but still playing through both monitors. I have the Multiface
outputs 1 & 2 going into my S/W which goes to each monitor (M-Audio
monitors). I see this issue regardless of what application I am using,
and using the TotalMix tool also, I can't seem to get anything to pan
hard right.
(BTW, Joe, the dead 1010 is on its way)
-- Brett
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
--
------------------------------------------------------------
"In the rhythm of music a secret is hidden;
If I were to divulge it, it would overturn the world."
-- Jelaleddin Rumi
3:09 p.m.
On Feb 17, 2008 9:52 AM, Brett McCoy <idragosani(a)gmail.com> wrote:
Solved the problem ... it was a stupid cabling
problem, one of them
infamous PEBKAC kind of things. h-|
Good to know. that stuff happens all the time over here. Glad to know
I'm not the only one! ;-)
cheers,
Mark
6116
days inactive
6117
days old
linux-audio-user@lists.linuxaudio.org
11 comments
4 participants
participants (4)
-
Brett McCoy -
Joe Hartley -
Marc-Olivier Barre -
Mark Knecht