27 Jan
2006
27 Jan
'06
11:51 a.m.
Hello all,
Sorry for the recent barrage of comments and questions from me. I
appreciate all of the answers I have received thus far.
One more question - regarding the relatively new CME UF7 USB/MIDI
controllers, are they compatible with ALSA? By compatible I mean
that, via USB, they are properly recognized and can be used
immediately, much like the M-Audio stuff. I've done Google searches
for CME + ALSA, and can't seem to find any information.
Thank you,
Josh
--
Josh Lawrence
http://www.hardbop200.com
12:24 p.m.
On 1/27/06, Clemens Ladisch <clemens(a)ladisch.de> wrote:
Try asking in their forum.
Regards,
Clemens
I will do that, thank you for the information.
--
Josh Lawrence
http://www.hardbop200.com
4:42 p.m.
Am Freitag, 27. Januar 2006 16:51 schrieb Josh Lawrence:
Hello all,
Sorry for the recent barrage of comments and questions from me. I
appreciate all of the answers I have received thus far.
One more question - regarding the relatively new CME UF7 USB/MIDI
controllers, are they compatible with ALSA? By compatible I mean
that, via USB, they are properly recognized and can be used
immediately, much like the M-Audio stuff. I've done Google searches
for CME + ALSA, and can't seem to find any information.
Thank you,
Josh
Hi Josh,
I have just buy a CME UF6 and it works very good via USB.
The funny thing is, I did nothing. It was just plug and play
I although have Midisport 4x4
aconnect shows me to devises
client 24: 'MidiStudio-2' [type=kernel]
0 'MidiStudio-2 MIDI 1'
1 'MidiStudio-2 MIDI 2'
but only the second worked.
I have some problem with the remote control and the master volume. The master
volume seams to send a lot of sysex datas and then my midi system is big
trouble.
The remote control buttons sent MTC datas (right ?). The start and stop
buttons worked with ardour and muse, but muse have big timing problems.
Rosegarden do nothing.
All other midi controller are working.
Christian
5:03 p.m.
On 1/27/06, christian bunge <ch-bunge(a)nord-com.net> wrote:
All other midi controller are working.
Christian
This is what I'm most interested in (other than it simply working, of
course). I'm a big Hammond nut, and since I got VST's working on my
Linux system, I am now looking for a MIDI controller that has 9
sliders for drawbars. Unfortunately, most controllers are plastic and
thus not suitable for being hauled around to gigs. CME is made of
metal, which would make it perfect for this sort of use. I've also
heard that the keyboard action is quite nice, but that's very
subjective, so we'll see.
Thanks again for the information.
--
Josh Lawrence
http://www.hardbop200.com
30 Jan
30 Jan
5:33 a.m.
christian bunge wrote:
I have just buy a CME UF6 and it works very good via
USB.
The funny thing is, I did nothing. It was just plug and play
aconnect shows me to devises
client 24: 'MidiStudio-2' [type=kernel]
0 'MidiStudio-2 MIDI 1'
1 'MidiStudio-2 MIDI 2'
but only the second worked.
It may be that both MidiTech and CME are using a generic USB interface
chip and didn't bother to change the vendor/product IDs, but I guess
that MidiTech keyboards are actually built be CME.
Am Freitag, 27. Januar 2006 16:51 schrieb Josh
Lawrence:
> One more question - regarding the relatively new CME UF7 USB/MIDI
> controllers, are they compatible with ALSA?
It might be possible to get them to work if I get the "lsusb -v" output.
Regards,
Clemens
6:25 a.m.
Am Montag, 30. Januar 2006 10:32 schrieb Clemens Ladisch:
christian bunge wrote:
this is my lsusb -v output only for the CMF UF6
Bus 001 Device 002: ID 7104:2202
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 16
idVendor 0x7104
idProduct 0x2202
bcdDevice 1.00
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 2 Communications
bInterfaceSubClass 1 Direct Line
bInterfaceProtocol 1
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 10
Regards
Christian
I have just buy a CME UF6 and it works very good
via USB.
The funny thing is, I did nothing. It was just plug and play
aconnect shows me to devises
client 24: 'MidiStudio-2' [type=kernel]
0 'MidiStudio-2 MIDI 1'
1 'MidiStudio-2 MIDI 2'
but only the second worked.
It may be that both MidiTech and CME are using a generic USB interface
chip and didn't bother to change the vendor/product IDs, but I guess
that MidiTech keyboards are actually built be CME.
Am Freitag, 27. Januar 2006 16:51 schrieb Josh
Lawrence:
> One more question - regarding the relatively new CME UF7 USB/MIDI
> controllers, are they compatible with ALSA?
It might be possible to get them to work if I get the "lsusb -v" output.
6668
days inactive
6671
days old
linux-audio-user@lists.linuxaudio.org
6 comments
3 participants
participants (3)
-
christian bunge -
Clemens Ladisch -
Josh Lawrence