----- Original Message ---- From: Jeremy <jeremy(a)autostatic.com> To: linux-audio-user(a)lists.linuxaudio.org Sent: Fri, February 5, 2010 3:38:27 PM Subject: Re: [LAU] How to make Focusrite Saffire 6 USB works? On 02/05/2010 02:13 AM, Pandu Rakimanputra wrote: Hello Pandu, It's a USB 1.1. class compliant device so it should work out of the box. And what is the output of lsusb and aplay -l ? Best, Jeremy PS, weird though that Focusrite isn't listed here: http://www.alsa-project.org/main/index.php/Matrix:Main _______________________________________________ Linux-audio-user mailing list Linux-audio-user(a)lists.linuxaudio.org http://lists.linuxaudio.org/listinfo/linux-audio-user Hi Jeremy... Well these are the output: -------------------------------------------------------------------------- lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 093a:2500 Pixart Imaging, Inc. USB Optical Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 1235:0010 Novation EMS Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------- aplay: **** List of PLAYBACK Hardware Devices **** card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012] Subdevices: 1/1 Subdevice #0: subdevice #0 --------------------------------------------------------------------------------------------------- well, i think dmesg will helpful: --------------------------------------------------------------------------------------------------- dmesg: [ 992.205033] usb 2-2: new full speed USB device using ohci_hcd and address 2 [ 992.422439] usb 2-2: configuration #1 chosen from 1 choice -------------------------------------------------------------------------------------------------- I've tried to load snd-usb-audio module manually, but the nothing happen. About list from alsa project, my previous soundcard ALESIS IO|2 USB isn't listed. But it works great with my linux box THx for your help Pandu P. Rakimanputra

----- Forwarded Message ---- From: Pandu Rakimanputra <pandu.rakimanputra(a)rocketmail.com> To: Clemens Ladisch <clemens(a)ladisch.de> Sent: Sat, February 20, 2010 9:11:45 AM Subject: Re: [LAU] How to make Focusrite Saffire 6 USB works? ----- Original Message ---- From: Clemens Ladisch <clemens(a)ladisch.de> To: Pandu Rakimanputra <pandu.rakimanputra(a)rocketmail.com> Cc: linux-audio-user(a)lists.linuxaudio.org Sent: Tue, February 16, 2010 2:47:54 PM Subject: Re: [LAU] How to make Focusrite Saffire 6 USB works? Pandu Rakimanputra wrote: Then it is not class compliant. Please show the output of "lsusb -v" for this device Regards, Clemens --------------------------------------------------------------------------------------- This is my lsusb -v: Bus 002 Device 002: ID 1235:0010 Novation EMS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1235 Novation EMS idProduct 0x0010 bcdDevice 1.00 iManufacturer 1 Focusrite Audio Engineering iProduct 2 Saffire 6USB iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 64 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 498mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x024c 1x 588 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 1 Transfer Type Isochronous Synch Type None Usage Type Data wMaxPacketSize 0x0126 1x 294 bytes bInterval 1 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0010 1x 16 bytes bInterval 1 Device Status: 0x0000 (Bus Powered) I hope i'll help Thanks for your attention, and sorry for my late reply Pandu Rakimanputra