16 Feb
2007
16 Feb
'07
1:22 p.m.
Homepage:
http://www.notam02.no/arkiv/doc/mammut/
Screenshot:
http://www.notam02.no/arkiv/doc/mammut/mammut.png
Changes 0.22 -> 0.57
---------------------
-Ported from gtk1 to juce.
-Various bells and whistles
-Binaries for windows and mac
-Various other things
16 Feb
16 Feb
4:49 p.m.
On Fr, 16.02.07 18:21 "Kjetil S. Matheussen"
<k.s.matheussen(a)notam02.no> wrote:
Homepage:
http://www.notam02.no/arkiv/doc/mammut/
Screenshot:
http://www.notam02.no/arkiv/doc/mammut/mammut.png
Changes 0.22 -> 0.57
---------------------
-Ported from gtk1 to juce.
-Various bells and whistles
-Binaries for windows and mac
-Various other things
Very hard to install this.. using Makefile.linux doesn't provide "make
install"
using Makefile_bu results in
make: *** No rule to make target `MainComponent.h', needed by
`MainAppWindow.o'. Stop.
7:31 p.m.
Thomas Kuther wrote:
On Fr, 16.02.07 18:21 "Kjetil S. Matheussen"
<k.s.matheussen(a)notam02.no> wrote:
that part worked out here: cd /src, edit the Makefile.linux,
#mv Makefile.linux Makefile
#make
but for me, make does not find the libjuce:
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$ make
g++ -o mammut -I../../juce -L../../juce/bin -MD -D "LINUX=1" -I
"/usr/include" -I../../juce -DTEMPDIR=\"/tmp\"
-DTEMPDIR=\"/tmp\" -O2
-I/site/include -I/usr/local/include -DHAVE_JACK --fast-math -D
"NDEBUG=1" -I/usr/include/vorbis globals.o load.o fft.o t_stretch.o
t_wobble.o t_sshift.o t_phadd.o t_pderiv.o t_filter.o t_invert.o
t_threshold.o t_peaks.o t_blockmov.o analysett.o t_gain.o t_combsplit.o
save.o t_reimsplit.o t_mirror.o t_ampphas.o phaseswap.o crossover.o
loadmult.o tempfile.o undo.o ApplicationStartup.o MainAppWindow.o
Interface.o gui.o c_interface.o Stretch.o Wobble.o MultiplyPhase.o
DerivativeAmp.o Filter.o Invert.o Threshold.o SpectrumShift.o
AmplitudeToPhase.o Gain.o CombSplit.o SplitRealImag.o KeepPeaks.o
BlockSwap.o Mirror.o Stereo.o juceplay.o Progressbar.o jackplay.o
PictureHolder.o Zoom.o oggsoundholder.o Prefs.o error.o -L/site/lib
-L/usr/local/include -lsndfile -lm -lpthread -ldl -L. -ljack
-lsamplerate -lvorbisfile -L -L -L "/usr/X11R6/lib/" -L
"../../../bin"
-lfreetype -lpthread -lX11 -lGL -lGLU -lXinerama -lasound -ljuce
/usr/bin/ld: cannot find -ljuce
collect2: ld returned 1 exit status
make: *** [mammut] Fehler 1
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$
the path in the Makefile is defined like default:
# Where juce is.
JUCE=../../juce
and the juce sourcetree is in the same directory as the mammut sourcetree.
that means that from /mammut/src i have to type twice 'cd ..' to come to
the dir where the juce source tree is located.
so what is mammut looking for: juce or juce/bin or sth else?
in other words, what is the right path setting if juce and mammit
sourcetree are in the same directory?
cheers,
doc
Homepage:
http://www.notam02.no/arkiv/doc/mammut/
Screenshot:
http://www.notam02.no/arkiv/doc/mammut/mammut.png
Changes 0.22 -> 0.57
---------------------
-Ported from gtk1 to juce.
-Various bells and whistles
-Binaries for windows and mac
-Various other things
Very hard to install this.. using Makefile.linux doesn't provide "make
install"
using Makefile_bu results in
make: *** No rule to make target `MainComponent.h', needed by
`MainAppWindow.o'. Stop.
17 Feb
17 Feb
4:44 a.m.
On Sa, 17.02.07 00:34 Dragan Noveski <perodog(a)gmx.net> wrote:
Thomas Kuther wrote:
You need a compiled JUCE, and libjuce.so maybe in a directory that is
known in /etc/ld.so.conf, so -ljuce finds it.
On Fr, 16.02.07 18:21 "Kjetil S.
Matheussen"
<k.s.matheussen(a)notam02.no> wrote:
that part worked out here: cd /src, edit the Makefile.linux,
#mv Makefile.linux Makefile
#make
but for me, make does not find the libjuce:
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$ make
g++ -o mammut -I../../juce -L../../juce/bin -MD -D "LINUX=1" -I
"/usr/include" -I../../juce -DTEMPDIR=\"/tmp\"
-DTEMPDIR=\"/tmp\"
-O2 -I/site/include -I/usr/local/include -DHAVE_JACK --fast-math -D
"NDEBUG=1" -I/usr/include/vorbis globals.o load.o fft.o t_stretch.o
t_wobble.o t_sshift.o t_phadd.o t_pderiv.o t_filter.o t_invert.o
t_threshold.o t_peaks.o t_blockmov.o analysett.o t_gain.o
t_combsplit.o save.o t_reimsplit.o t_mirror.o t_ampphas.o phaseswap.o
crossover.o loadmult.o tempfile.o undo.o ApplicationStartup.o
MainAppWindow.o Interface.o gui.o c_interface.o Stretch.o Wobble.o
MultiplyPhase.o DerivativeAmp.o Filter.o Invert.o Threshold.o
SpectrumShift.o AmplitudeToPhase.o Gain.o CombSplit.o SplitRealImag.o
KeepPeaks.o BlockSwap.o Mirror.o Stereo.o juceplay.o Progressbar.o
jackplay.o PictureHolder.o Zoom.o oggsoundholder.o Prefs.o error.o
-L/site/lib -L/usr/local/include -lsndfile -lm -lpthread -ldl -L.
-ljack -lsamplerate -lvorbisfile -L -L -L "/usr/X11R6/lib/" -L
"../../../bin" -lfreetype -lpthread -lX11 -lGL -lGLU -lXinerama
-lasound -ljuce /usr/bin/ld: cannot find -ljuce
collect2: ld returned 1 exit status
make: *** [mammut] Fehler 1
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$
the path in the Makefile is defined like default:
# Where juce is.
JUCE=../../juce
and the juce sourcetree is in the same directory as the mammut
sourcetree. that means that from /mammut/src i have to type twice
'cd ..' to come to the dir where the juce source tree is located.
so what is mammut looking for: juce or juce/bin or sth else?
in other words, what is the right path setting if juce and mammit
sourcetree are in the same directory?
cheers,
doc Homepage:
http://www.notam02.no/arkiv/doc/mammut/
Screenshot:
http://www.notam02.no/arkiv/doc/mammut/mammut.png
Changes 0.22 -> 0.57
---------------------
-Ported from gtk1 to juce.
-Various bells and whistles
-Binaries for windows and mac
-Various other things
Very hard to install this.. using Makefile.linux doesn't provide
"make install"
using Makefile_bu results in
make: *** No rule to make target `MainComponent.h', needed by
`MainAppWindow.o'. Stop.
18 Feb
18 Feb
1:44 p.m.
Thomas Kuther wrote:
On Sa, 17.02.07 00:34 Dragan Noveski
<perodog(a)gmx.net> wrote:
ok, but how to tell to juce that it builds libjuce.so at all
i am running 'make' in the juce/build/linux successfully, but after
that running updatedb first, and than:
nowhiskey@murija2:~/software/nove/mammut/juce/build/linux$ locate
libjuce.so
nowhiskey@murija2:~/software/nove/mammut/juce/build/linux$
so i think .so is not build?
i tried looking into juce-forum but there i found only wired stuff
(well, for me!), perhaps there is some recommended way of doing this
in linux, which is not so difficult to explain!?
also, since there is no 'make install' in juce, i understood you that it
is enough to cp libjuce.so /usr/local/lib ??
hope that i get some help, really interested to get mammut working here!
cheers,
doc
Thomas Kuther wrote:
You need a compiled JUCE, and libjuce.so maybe in a directory that is
known in /etc/ld.so.conf, so -ljuce finds it.
On Fr, 16.02.07 18:21 "Kjetil S.
Matheussen"
<k.s.matheussen(a)notam02.no> wrote:
that part worked out here: cd /src, edit the Makefile.linux,
#mv Makefile.linux Makefile
#make
but for me, make does not find the libjuce:
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$ make
g++ -o mammut -I../../juce -L../../juce/bin -MD -D "LINUX=1" -I
"/usr/include" -I../../juce -DTEMPDIR=\"/tmp\"
-DTEMPDIR=\"/tmp\"
-O2 -I/site/include -I/usr/local/include -DHAVE_JACK --fast-math -D
"NDEBUG=1" -I/usr/include/vorbis globals.o load.o fft.o t_stretch.o
t_wobble.o t_sshift.o t_phadd.o t_pderiv.o t_filter.o t_invert.o
t_threshold.o t_peaks.o t_blockmov.o analysett.o t_gain.o
t_combsplit.o save.o t_reimsplit.o t_mirror.o t_ampphas.o phaseswap.o
crossover.o loadmult.o tempfile.o undo.o ApplicationStartup.o
MainAppWindow.o Interface.o gui.o c_interface.o Stretch.o Wobble.o
MultiplyPhase.o DerivativeAmp.o Filter.o Invert.o Threshold.o
SpectrumShift.o AmplitudeToPhase.o Gain.o CombSplit.o SplitRealImag.o
KeepPeaks.o BlockSwap.o Mirror.o Stereo.o juceplay.o Progressbar.o
jackplay.o PictureHolder.o Zoom.o oggsoundholder.o Prefs.o error.o
-L/site/lib -L/usr/local/include -lsndfile -lm -lpthread -ldl -L.
-ljack -lsamplerate -lvorbisfile -L -L -L "/usr/X11R6/lib/" -L
"../../../bin" -lfreetype -lpthread -lX11 -lGL -lGLU -lXinerama
-lasound -ljuce /usr/bin/ld: cannot find -ljuce
collect2: ld returned 1 exit status
make: *** [mammut] Fehler 1
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$
the path in the Makefile is defined like default:
# Where juce is.
JUCE=../../juce
and the juce sourcetree is in the same directory as the mammut
sourcetree. that means that from /mammut/src i have to type twice
'cd ..' to come to the dir where the juce source tree is located.
so what is mammut looking for: juce or juce/bin or sth else?
in other words, what is the right path setting if juce and mammit
sourcetree are in the same directory?
cheers,
doc
Homepage:
http://www.notam02.no/arkiv/doc/mammut/
Screenshot:
http://www.notam02.no/arkiv/doc/mammut/mammut.png
Changes 0.22 -> 0.57
---------------------
-Ported from gtk1 to juce.
-Various bells and whistles
-Binaries for windows and mac
-Various other things
Very hard to install this.. using Makefile.linux doesn't provide
"make install"
using Makefile_bu results in
make: *** No rule to make target `MainComponent.h', needed by
`MainAppWindow.o'. Stop.
3:41 p.m.
On So, 18.02.07 18:48 Dragan Noveski <perodog(a)gmx.net> wrote:
Thomas Kuther wrote:
Ah sorry, it's actually libjuce.a
But yes, copying that to /usr/lib or /usr/local/lib seems to do the
trick here, as long you have that path in /etc/ls.so.conf
On Sa, 17.02.07 00:34 Dragan Noveski
<perodog(a)gmx.net> wrote:
ok, but how to tell to juce that it builds libjuce.so at all
i am running 'make' in the juce/build/linux successfully, but
after that running updatedb first, and than:
nowhiskey@murija2:~/software/nove/mammut/juce/build/linux$ locate
libjuce.so
nowhiskey@murija2:~/software/nove/mammut/juce/build/linux$
so i think .so is not build?
i tried looking into juce-forum but there i found only wired stuff
(well, for me!), perhaps there is some recommended way of doing
this in linux, which is not so difficult to explain!?
also, since there is no 'make install' in juce, i understood you that
it is enough to cp libjuce.so /usr/local/lib ??
hope that i get some help, really interested to get mammut working
here!
cheers,
doc
Thomas Kuther wrote:
You need a compiled JUCE, and libjuce.so maybe in a directory that
is known in /etc/ld.so.conf, so -ljuce finds it.
On Fr, 16.02.07 18:21 "Kjetil S.
Matheussen"
<k.s.matheussen(a)notam02.no> wrote:
> Homepage:
> http://www.notam02.no/arkiv/doc/mammut/
>
> Screenshot:
> http://www.notam02.no/arkiv/doc/mammut/mammut.png
>
>
> Changes 0.22 -> 0.57
> ---------------------
> -Ported from gtk1 to juce.
> -Various bells and whistles
> -Binaries for windows and mac
> -Various other things
>
>
Very hard to install this.. using Makefile.linux doesn't provide
"make install"
using Makefile_bu results in
make: *** No rule to make target `MainComponent.h', needed by
`MainAppWindow.o'. Stop.
that part worked out here: cd /src, edit the Makefile.linux,
#mv Makefile.linux Makefile
#make
but for me, make does not find the libjuce:
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$ make
g++ -o mammut -I../../juce -L../../juce/bin -MD -D "LINUX=1" -I
"/usr/include" -I../../juce -DTEMPDIR=\"/tmp\"
-DTEMPDIR=\"/tmp\"
-O2 -I/site/include -I/usr/local/include -DHAVE_JACK --fast-math
-D "NDEBUG=1" -I/usr/include/vorbis globals.o load.o fft.o
t_stretch.o t_wobble.o t_sshift.o t_phadd.o t_pderiv.o t_filter.o
t_invert.o t_threshold.o t_peaks.o t_blockmov.o analysett.o
t_gain.o t_combsplit.o save.o t_reimsplit.o t_mirror.o t_ampphas.o
phaseswap.o crossover.o loadmult.o tempfile.o undo.o
ApplicationStartup.o MainAppWindow.o Interface.o gui.o
c_interface.o Stretch.o Wobble.o MultiplyPhase.o DerivativeAmp.o
Filter.o Invert.o Threshold.o SpectrumShift.o AmplitudeToPhase.o
Gain.o CombSplit.o SplitRealImag.o KeepPeaks.o BlockSwap.o
Mirror.o Stereo.o juceplay.o Progressbar.o jackplay.o
PictureHolder.o Zoom.o oggsoundholder.o Prefs.o error.o
-L/site/lib -L/usr/local/include -lsndfile -lm -lpthread -ldl -L.
-ljack -lsamplerate -lvorbisfile -L -L -L "/usr/X11R6/lib/" -L
"../../../bin" -lfreetype -lpthread -lX11 -lGL -lGLU -lXinerama
-lasound -ljuce /usr/bin/ld: cannot find -ljuce collect2: ld
returned 1 exit status make: *** [mammut] Fehler 1
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$
the path in the Makefile is defined like default:
# Where juce is.
JUCE=../../juce
and the juce sourcetree is in the same directory as the mammut
sourcetree. that means that from /mammut/src i have to type twice
'cd ..' to come to the dir where the juce source tree is located.
so what is mammut looking for: juce or juce/bin or sth else?
in other words, what is the right path setting if juce and mammit
sourcetree are in the same directory?
cheers,
doc
3:49 p.m.
Thomas Kuther wrote:
On So, 18.02.07 18:48 Dragan Noveski
<perodog(a)gmx.net> wrote:
i did not even had to copy the file, just setting:
# Where juce is.
JUCE=/home/nowhiskey/software/nove/mammut/juce
in the Makefile - it just worked!
cheers,
doc
Thomas Kuther wrote:
Ah sorry, it's actually libjuce.a
But yes, copying that to /usr/lib or /usr/local/lib seems to do the
trick here, as long you have that path in /etc/ls.so.conf
On Sa, 17.02.07 00:34 Dragan Noveski
<perodog(a)gmx.net> wrote:
ok, but how to tell to juce that it builds libjuce.so at all
i am running 'make' in the juce/build/linux successfully, but
after that running updatedb first, and than:
nowhiskey@murija2:~/software/nove/mammut/juce/build/linux$ locate
libjuce.so
nowhiskey@murija2:~/software/nove/mammut/juce/build/linux$
so i think .so is not build?
i tried looking into juce-forum but there i found only wired stuff
(well, for me!), perhaps there is some recommended way of doing
this in linux, which is not so difficult to explain!?
also, since there is no 'make install' in juce, i understood you that
it is enough to cp libjuce.so /usr/local/lib ??
hope that i get some help, really interested to get mammut working
here!
cheers,
doc
Thomas Kuther wrote:
> On Fr, 16.02.07 18:21 "Kjetil S. Matheussen"
> <k.s.matheussen(a)notam02.no> wrote:
>
>
>
>
>> Homepage:
>> http://www.notam02.no/arkiv/doc/mammut/
>>
>> Screenshot:
>> http://www.notam02.no/arkiv/doc/mammut/mammut.png
>>
>>
>> Changes 0.22 -> 0.57
>> ---------------------
>> -Ported from gtk1 to juce.
>> -Various bells and whistles
>> -Binaries for windows and mac
>> -Various other things
>>
>>
>>
> Very hard to install this.. using Makefile.linux doesn't provide
> "make install"
> using Makefile_bu results in
> make: *** No rule to make target `MainComponent.h', needed by
> `MainAppWindow.o'. Stop.
>
>
>
>
that part worked out here: cd /src, edit the Makefile.linux,
#mv Makefile.linux Makefile
#make
but for me, make does not find the libjuce:
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$ make
g++ -o mammut -I../../juce -L../../juce/bin -MD -D "LINUX=1" -I
"/usr/include" -I../../juce -DTEMPDIR=\"/tmp\"
-DTEMPDIR=\"/tmp\"
-O2 -I/site/include -I/usr/local/include -DHAVE_JACK --fast-math
-D "NDEBUG=1" -I/usr/include/vorbis globals.o load.o fft.o
t_stretch.o t_wobble.o t_sshift.o t_phadd.o t_pderiv.o t_filter.o
t_invert.o t_threshold.o t_peaks.o t_blockmov.o analysett.o
t_gain.o t_combsplit.o save.o t_reimsplit.o t_mirror.o t_ampphas.o
phaseswap.o crossover.o loadmult.o tempfile.o undo.o
ApplicationStartup.o MainAppWindow.o Interface.o gui.o
c_interface.o Stretch.o Wobble.o MultiplyPhase.o DerivativeAmp.o
Filter.o Invert.o Threshold.o SpectrumShift.o AmplitudeToPhase.o
Gain.o CombSplit.o SplitRealImag.o KeepPeaks.o BlockSwap.o
Mirror.o Stereo.o juceplay.o Progressbar.o jackplay.o
PictureHolder.o Zoom.o oggsoundholder.o Prefs.o error.o
-L/site/lib -L/usr/local/include -lsndfile -lm -lpthread -ldl -L.
-ljack -lsamplerate -lvorbisfile -L -L -L "/usr/X11R6/lib/" -L
"../../../bin" -lfreetype -lpthread -lX11 -lGL -lGLU -lXinerama
-lasound -ljuce /usr/bin/ld: cannot find -ljuce collect2: ld
returned 1 exit status make: *** [mammut] Fehler 1
nowhiskey@murija2:~/software/nove/mammut/mammut-0.57/src$
the path in the Makefile is defined like default:
# Where juce is.
JUCE=../../juce
and the juce sourcetree is in the same directory as the mammut
sourcetree. that means that from /mammut/src i have to type twice
'cd ..' to come to the dir where the juce source tree is located.
so what is mammut looking for: juce or juce/bin or sth else?
in other words, what is the right path setting if juce and mammit
sourcetree are in the same directory?
cheers,
doc
You need a compiled JUCE, and libjuce.so maybe in a directory that
is known in /etc/ld.so.conf, so -ljuce finds it.
16 Feb
16 Feb
9:37 p.m.
Kjetil S. Matheussen wrote:
Homepage:
http://www.notam02.no/arkiv/doc/mammut/
Screenshot:
http://www.notam02.no/arkiv/doc/mammut/mammut.png
Cool, but is any of it (JUCE, Mammut) 64-bit friendly ? I've hit the
wall with a problem compiling libjuce, I get an assembler error message
(sorry, I'm not on the afflicted machine right now).
Best,
dp
6709
days inactive
6711
days old
linux-audio-user@lists.linuxaudio.org
7 comments
4 participants
participants (4)
-
Dave Phillips -
Dragan Noveski -
Kjetil S. Matheussen -
Thomas Kuther