8 Jan
2013
8 Jan
'13
2:12 p.m.
Hi William,
Building the latest git pull for 0.14.97 on a completely updated Arch 64
system:
[dlphilp@bigblack phasex]$ aclocal
configure.ac:695: error: 'AM_CONFIG_HEADER': this macro is obsolete.
You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded
from...
configure.ac:695: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
I followed the advice, updated the macro declaration, and aclocal ran to
its end, after which the rest of the autotools ran without complaint.
I used the following build configuration:
./configure --enable-cpu-power --enable-arch=native --prefix=/usr/local
No reported errors during the build config, Phasex compiled without
problems.
CPU is an AMD64 3200+, single-core, with 4G RAM, GCC 4.7.2.
From uname :
Linux 3.7.1-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux
Alas, when I start Phasex it segfaults immediately:
[dlphilp@bigblack ~]$ phasex
Not sending deprecated LASH_Client_Name event
LASH client initialized. (LASH_Client_Name='phasex').
Main: LASH client started.
(phasex:1239): Gtk-WARNING **: Unable to locate theme engine in
module_path: "nodoka",
(phasex:1239): Gtk-WARNING **: Unable to locate theme engine in
module_path: "nodoka",
Segmentation fault (core dumped)
Bummer. Also, the splash indicates 0.14.96 but the git pull specified
0.14.97. There is no previous version of Phasex on my system.
Suggestions are welcome. :)
Best,
dp
8 Jan
8 Jan
3:13 p.m.
New subject: [LAD] Announcing PHASEX-0.14.96
On 01/08/2013 02:12 PM, Dave Phillips wrote:
Hi William,
Building the latest git pull for 0.14.97 on a completely updated Arch 64
system:
[dlphilp@bigblack phasex]$ aclocal
configure.ac:695: error: 'AM_CONFIG_HEADER': this macro is obsolete.
You should use the 'AC_CONFIG_HEADERS' macro instead.
/usr/share/aclocal-1.13/obsolete-err.m4:12: AM_CONFIG_HEADER is expanded
from...
configure.ac:695: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: error: echo failed with exit status: 1
I followed the advice, updated the macro declaration, and aclocal ran to
its end, after which the rest of the autotools ran without complaint.
I used the following build configuration:
./configure --enable-cpu-power --enable-arch=native --prefix=/usr/local
No reported errors during the build config, Phasex compiled without
problems.
CPU is an AMD64 3200+, single-core, with 4G RAM, GCC 4.7.2.
From uname :
Linux 3.7.1-2-ARCH #1 SMP PREEMPT x86_64 GNU/Linux
Alas, when I start Phasex it segfaults immediately:
[dlphilp@bigblack ~]$ phasex
Not sending deprecated LASH_Client_Name event
LASH client initialized. (LASH_Client_Name='phasex').
Main: LASH client started.
(phasex:1239): Gtk-WARNING **: Unable to locate theme engine in
module_path: "nodoka",
(phasex:1239): Gtk-WARNING **: Unable to locate theme engine in
module_path: "nodoka",
Segmentation fault (core dumped)
Bummer. Also, the splash indicates 0.14.96 but the git pull specified
0.14.97. There is no previous version of Phasex on my system.
Suggestions are welcome. :)
Best,
dp
I'm also seeing this. Are you using nvidia driver perchance?
Program terminated with signal 11, Segmentation fault.
#0 0x00007f3bb539bfc2 in ?? () from /lib64/tls/libnvidia-tls.so.310.19
Full backtrace: http://pastebin.com/vR5b1mV9
This is a fully updated fedora 18. My Fedora 17 laptop (intel video) was OK.
@William: FYI:
http://bsjones.fedorapeople.org/phasex-0.14.97-0.1.git27f2130b.fc18.src.rpm
Brendan
4:44 p.m.
New subject: [LAD] Announcing PHASEX-0.14.96
On 01/08/2013 09:13 AM, Brendan Jones wrote:
On 01/08/2013 02:12 PM, Dave Phillips wrote:
Yes, the latest 304.xx driver, one of the legacy drivers.
... when I start Phasex it segfaults
immediately:
I'm also seeing this. Are you using nvidia driver perchance?
Program terminated with signal 11, Segmentation
fault.
#0 0x00007f3bb539bfc2 in ?? () from /lib64/tls/libnvidia-tls.so.310.19
Full backtrace: http://pastebin.com/vR5b1mV9
This is a fully updated fedora 18. My Fedora 17 laptop (intel video)
was OK.
I can't find the generated core dump, but here's the results of 'bt
full' on a debugging run :
[dlphilp@bigblack ~]$ gdb phasex
GNU gdb (GDB) 7.5.1
Copyright (C) 2012 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-unknown-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /usr/local/bin/phasex...done.
(gdb) r
Starting program: /usr/local/bin/phasex
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
Traceback (most recent call last):
File
"/usr/share/gdb/auto-load/usr/lib/libgobject-2.0.so.0.3400.3-gdb.py",
line 9, in <module>
from gobject import register
File "/usr/share/glib-2.0/gdb/gobject.py", line 3, in <module>
import gdb.backtrace
ImportError: No module named backtrace
[New Thread 0x7fffedc34700 (LWP 1632)]
Not sending deprecated LASH_Client_Name event
LASH client initialized. (LASH_Client_Name='phasex').
Main: LASH client started.
[New Thread 0x7fffed433700 (LWP 1633)]
(phasex:1628): Gtk-WARNING **: Unable to locate theme engine in
module_path: "nodoka",
(phasex:1628): Gtk-WARNING **: Unable to locate theme engine in
module_path: "nodoka",
[New Thread 0x7fffe7fff700 (LWP 1634)]
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff76bad44 in pthread_mutex_lock () from /usr/lib/libpthread.so.0
(gdb) bt full
#0 0x00007ffff76bad44 in pthread_mutex_lock () from
/usr/lib/libpthread.so.0
No symbol table info available.
#1 0x00007ffff78d8456 in jack_port_connected_to () from
/usr/lib/libjack.so.0
No symbol table info available.
#2 0x000000000043bfe6 in jack_get_midi_port_list ()
No symbol table info available.
#3 0x000000000043ca1e in jack_audio_init ()
No symbol table info available.
#4 0x000000000041f95c in init_audio ()
No symbol table info available.
#5 0x000000000041750d in main ()
No symbol table info available.
(gdb) c
Continuing.
[Thread 0x7fffedc34700 (LWP 1632) exited]
[Thread 0x7fffe7fff700 (LWP 1634) exited]
[Thread 0x7fffed433700 (LWP 1633) exited]
Program terminated with signal SIGSEGV, Segmentation fault.
The program no longer exists.
(gdb)
Was the nVidia problem apparent only after reading your core file ?
Best,
dp
4366
days inactive
4366
days old
linux-audio-user@lists.linuxaudio.org
2 comments
2 participants
participants (2)
-
Brendan Jones -
Dave Phillips