On Sat, 2002-11-30 at 07:03, Patrick Shirkey wrote: Yes. Could you set things up so you can record from it then do alsactl -f recordingFromLiveDrive store <yourCard> and send me the recordingFromLiveDrive file. That would be such a great help. Thanks -- rob &lt;mailingLists(a)pangolin.org.uk&gt;

Hi, Thanks for reply. Sorry for the long delay things got a little busy and I haven't had a chance to look at the card till now. On Mon, 2002-12-02 at 14:07, Patrick Shirkey wrote: I noticed though that if I select either of the line ins on the live drive for recording it does not dselect the previous device. E.g I can select the line in on the back of the card for recording and the the stereo line in on the live drive and the mono line in on the live drive. As nowhere have seen that the sblive has five channels in I assume that something isn't working right. arecord -f cd -d sblive test.wav have an .asoundrc file just copied it from somewhere don't know what it dose (was needed for jack). Here it is #start .asoundrc pcm.sblive { type hw card 0 } ctl.sblive { type hw card 0 } #end .asoundrc rob@samantha:~$ ls /proc/asound/card0 ac97#0 fx8010_acode fx8010_tram_addr midi0 pcm0c pcm2c ac97#0regs fx8010_code fx8010_tram_data midi1 pcm0p pcm3p emu10k1 fx8010_gpr id midi2 pcm1c wavetableD1 If you can help could you CC me so I don't miss it. Thanks. -- rob &lt;mailingLists(a)pangolin.org.uk&gt;