8 Jun
2011
8 Jun
'11
12:21 a.m.
Hello, all,
Hydrogen has some very nice sounding sets, but in each and every one of
them, the open hi-hat is not muted by the pedal. I was wondering whether
that was somehow configurable or whether it was just idiosyncratic to
hydrogen. I'm not using the GUI, of course, just driving the engine
through midi, so perhaps that is the reason for this behaviour?
Cheers,
S.M.
--
8 Jun
8 Jun
12:32 a.m.
On Tue, 2011-06-07 at 18:21 -0400, S. Massy wrote:
Hello, all,
Hydrogen has some very nice sounding sets, but in each and every one of
them, the open hi-hat is not muted by the pedal. I was wondering whether
that was somehow configurable or whether it was just idiosyncratic to
hydrogen. I'm not using the GUI, of course, just driving the engine
through midi, so perhaps that is the reason for this behaviour?
Cheers,
S.M.
When using hydrogen, then I'm using it the same way. Hm, I dunno,
because I'm seldom using it for HiHat, but perhaps 'Mute Group'?
12:37 a.m.
Hello Massy!
I've looked it up in the drumkit I'm using. Edit your XML file, look for the
entry for the hihats and add the command:
<muteGroup>0</muteGroup>
In my hydrogen file it's just above the <layer> tag. I suppose if you need
you can have more muteGroups continuing at 1, 2, ... good luck!
Warm regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
12:40 a.m.
On Wed, 2011-06-08 at 00:37 +0200, Julien Claassen wrote:
Hello Massy!
I've looked it up in the drumkit I'm using. Edit your XML file, look for the
entry for the hihats and add the command:
<muteGroup>0</muteGroup>
In my hydrogen file it's just above the <layer> tag. I suppose if you need
you can have more muteGroups continuing at 1, 2, ... good luck!
Warm regards
Julien
Ok, it's mute group, than use the GUI. Instrument > General, right
beside gain
12:42 a.m.
Hello Ralf!
Massy, like myself, is blind. :-) But it's easy to enter into the file. the
structure is clear enough. Thanks to the Hydrogen Team for using XML!
Warm regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
1:26 a.m.
New subject: [OT] Hydrogen and Hi-hats
On Wed, 2011-06-08 at 00:42 +0200, Julien Claassen wrote:
Hello Ralf!
Massy, like myself, is blind. :-) But it's easy to enter into the file. the
structure is clear enough. Thanks to the Hydrogen Team for using XML!
Warm regards
Julien
The GUI might be less good in Braille :D. Btw. I once tested Orca screen
reader to use a DE with eyes closed, it was terrible. Orca said what I
did with the mouse, when it was to late, it didn't read before I clicked
inside a pull down menu.
Regards,
Ralf
9:06 p.m.
New subject: [OT] Hydrogen and Hi-hats
On Wed, Jun 08, 2011 at 01:25:54AM +0200, Ralf Mardorf wrote:
On Wed, 2011-06-08 at 00:42 +0200, Julien Claassen
wrote:
In general GUIs are more or less of a pain to use; but in
hydrogen's
case, the question doesn't even come up, since it's a QT application,
and therefore inaccessible, because orca only works with GTK@/ATK-based
interfaces. But, as Julien pointed out, hydrogen uses a very sensible
XML-based format for its configuration and definitions, which keeps it
partly accessible.
Cheers,
S.M.
Hello Ralf!
Massy, like myself, is blind. :-) But it's easy to enter into the file. the
structure is clear enough. Thanks to the Hydrogen Team for using XML!
Warm regards
Julien
The GUI might be less good in Braille :D. Btw. I once tested Orca screen
reader to use a DE with eyes closed, it was terrible. Orca said what I
did with the mouse, when it was to late, it didn't read before I clicked
inside a pull down menu.
Regards,
Ralf
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
--
8:56 p.m.
On Wed, Jun 08, 2011 at 12:37:50AM +0200, Julien Claassen wrote:
Hello Massy!
I've looked it up in the drumkit I'm using. Edit your XML file,
look for the entry for the hihats and add the command:
<muteGroup>0</muteGroup>
In my hydrogen file it's just above the <layer> tag. I suppose if
you need you can have more muteGroups continuing at 1, 2, ... good
luck!
Excellent pointer, and thanks to everyone who responded. yes, it looks
like you can assign arbitrary indices and define as many MuteGroups as
you like.
Cheers,
S.M.
Warm regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de
--
12:46 a.m.
On Tue, 7 Jun 2011, S. Massy wrote:
Hello, all,
Hydrogen has some very nice sounding sets, but in each and every one of
them, the open hi-hat is not muted by the pedal. I was wondering whether
that was somehow configurable or whether it was just idiosyncratic to
hydrogen. I'm not using the GUI, of course, just driving the engine
through midi, so perhaps that is the reason for this behaviour?
Definately mute groups... and it's documented in the manual.
(At least it was in 0.9.4).
-gabriel
4852
days inactive
4853
days old
linux-audio-user@lists.linuxaudio.org
8 comments
4 participants
participants (4)
-
Gabriel M. Beddingfield -
Julien Claassen -
Ralf Mardorf -
S. Massy