15 Aug
2004
15 Aug
'04
5:44 a.m.
Hi,
I'm rebuilding my Linux Audio box after a card change and system
crash. I know I've seen this problem before but can't remember
what I did to fix it (and that system and all its logs are long gone.)
I'm using a Delta 1010 (not the LT)
I'm using the CCRMA kernel: kernel-2.4.26-1.ll.rh90.ccrma
The latest ALSA release: 1.0.5a
Now I'm compiling JACK 0.98.1 and I get this in the middle of
my './configure' trace:
------------------------------------------------------
checking for pkg-config... /usr/bin/pkg-config
checking for sndfile >= 1.0... Package sndfile was not found in the
pkg-config search path.
Perhaps you should add the directory containing `sndfile.pc'
to the PKG_CONFIG_PATH environment variable
No package 'sndfile' found
configure: WARNING: *** the jackrec example client will not be built
------------------------------------------------------
wha...?
Am I gonna be needing this 'jackrec example client'?
Anybody have a clue-by-4 to throw in my direction? ;-)
Peace,
~Jos~
15 Aug
15 Aug
6:35 a.m.
On Sun, 2004-08-15 at 00:28, Jos Laake wrote:
Hi,
I'm rebuilding my Linux Audio box after a card change and system
crash. I know I've seen this problem before but can't remember
what I did to fix it (and that system and all its logs are long gone.)
I'm using a Delta 1010 (not the LT)
I'm using the CCRMA kernel: kernel-2.4.26-1.ll.rh90.ccrma
The latest ALSA release: 1.0.5a
Now I'm compiling JACK 0.98.1 and I get this in the middle of
my './configure' trace:
------------------------------------------------------
checking for pkg-config... /usr/bin/pkg-config
checking for sndfile >= 1.0... Package sndfile was not found in the
pkg-config search path.
Perhaps you should add the directory containing `sndfile.pc'
to the PKG_CONFIG_PATH environment variable
No package 'sndfile' found
configure: WARNING: *** the jackrec example client will not be built
My system (Mdk 10) uses /usr/lib/pkgconfig directory to store .pc config
files in. Some compiling I did recently gave me the same sort of
message...by default most apps seem to look for package configs in
/usr/local/lib, or at least in my experience anyway. So I'd do an
"export PKG_CONFIG_PATH=/usr/lib/pkg-config" before running ./configure.
THat usually fixed it.
I'm no expert but seems your pkg-config directory is somewhere other
than /usr/bin/pkg-config? Seems an odd place....is that where Redhat
puts config files?
R~
------------------------------------------------------
wha...?
Am I gonna be needing this 'jackrec example client'?
Anybody have a clue-by-4 to throw in my direction? ;-)
Peace,
~Jos~
8:18 a.m.
New subject: [linux-audio-user] New install issues (Was: Trouble compiling JACK 0.98.1)
Okay, here's where I'm at:
Jack compiled okay.
'qjackctl' compiled okay.
Now I'm getting this trace from 'qjackctl' for 'jackd'
------------------------
02:55:54.371 JACK is starting...
02:55:54.372 /usr/local/bin/jackd -R -dalsa -dhw:0 -r96000 -p1024 -n2
-i8 -o8 -zs
02:55:54.383 JACK was started with PID=3706 (0xe7a).
jackd 0.98.1
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
loading driver ..
apparent rate = 96000
creating alsa driver ... hw:0|hw:0|1024|2|96000|8|8|nomon|swmeter|-|32bit
jackd: pcm.c:690: snd_pcm_nonblock: Assertion `pcm' failed.
02:55:54.414 JACK was stopped successfully.
02:55:57.556 Could not connect to JACK server as client.
------------------------
Also, other utilities (alsamixer and envy24control) don't
seem to see 'hw:0' either.
Seems like I'm ready for clue #2.
Ideas anyone?
Yhanks in advance,
~Jos~
11:51 a.m.
New subject: [linux-audio-user] New install issues (Was: Trouble compiling JACK 0.98.1)
On Sun, 15 Aug 2004 03:02:45 -0700
Jos Laake <jos(a)radiks.net> wrote:
Also, other utilities (alsamixer and envy24control) don't
seem to see 'hw:0' either.
hi
maybe the troubleshooting page on alsa.opensrc.org has some clues :)
flo
--
Palimm Palimm!
http://affenbande.org/~tapas/
16 Aug
16 Aug
1:38 a.m.
New subject: [linux-audio-user] New install issues (Was: Trouble compiling JACK 0.98.1)
Florian Schmidt wrote:
hi
maybe the troubleshooting page on alsa.opensrc.org has some clues :)
flo
Thank you, flo, for the pointer.
Their page was very helpful. I got a lot further with it.
I'm still not up yet, though. Here's where I'm at today...
ALSA recompiled with the soundcards I have.
'alsaplayer' compiled.
'envy24control' compiled.
'Alsaplayer' plays via the alsa output. (Yea!!!)
'envy24control' now runs and sees 'hw:0' but doesn't do
squat other than show me the output volume.
The output was REALLY LOUD and nothing would turn it down.
I discovered that the volume control on 'alsaplayer' would
turn it dowm.
Tried starting 'qjackctl'. It starts 'jackd' but now it
craps out for different reasons. Oh, well, I'll just try
to look at that as "progress". ;-)
Here's the latest trace from 'qjackctl':
------------------------------
19:52:28.367 JACK is starting...
19:52:28.368 /usr/local/bin/jackd -R -dalsa -dhw:0 -r96000 -p1024 -n2
-i2 -o2 -zs
19:52:28.383 JACK was started with PID=21751 (0x54f7).
jackd 0.98.1
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
loading driver ..
apparent rate = 96000
creating alsa driver ... hw:0|hw:0|1024|2|96000|2|2|nomon|swmeter|-|32bit
control device hw:0
configuring for 96000Hz, period = 1024 frames, buffer = 2 periods
ALSA: cannot set channel count to 2 for capture
ALSA: cannot configure capture channel
cannot load driver module alsa
19:52:28.461 JACK was stopped successfully.
19:52:31.472 Could not connect to JACK server as client.
------------------------------
Other info:
All these modules are loaded:
-----
snd-pcm-oss 45192 0 (autoclean)
snd-mixer-oss 16728 2 (autoclean) [snd-pcm-oss]
snd-seq-midi 5152 0 (unused)
snd-seq-midi-event 6272 0 [snd-seq-midi]
snd-seq 50032 3 [snd-seq-midi snd-seq-midi-event]
snd-intel8x0 25196 1
gameport 3380 0 [snd-intel8x0]
snd-ice1712 56260 3
snd-pcm 86432 0 [snd-pcm-oss snd-intel8x0 snd-ice1712]
snd-timer 20996 0 [snd-seq snd-pcm]
snd-page-alloc 9336 0 [snd-intel8x0 snd-pcm]
snd-cs8427 9320 0 [snd-ice1712]
snd-i2c 4660 0 [snd-ice1712 snd-cs8427]
snd-ac97-codec 68188 0 [snd-intel8x0 snd-ice1712]
snd-mpu401-uart 5696 0 [snd-intel8x0 snd-ice1712]
snd-rawmidi 19520 0 [snd-seq-midi snd-mpu401-uart]
snd-seq-device 6220 0 [snd-seq-midi snd-seq snd-rawmidi]
snd-ice17xx-ak4xxx 2760 0 [snd-ice1712]
snd-ak4xxx-adda 5680 0 [snd-ice1712 snd-ice17xx-ak4xxx]
snd 48708 2 [snd-pcm-oss snd-mixer-oss snd-seq-midi
snd-seq-midi-event snd-seq snd-intel8x0 snd-ice1712 snd-pcm snd-timer
snd-cs8427 snd-i2c snd-ac97-codec snd-mpu401-uart snd-rawmidi
snd-seq-device snd-ak4xxx-adda]
soundcore
-----
The pertinent section of my '/etc/modules.conf' looks like this:
-----
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-ice1712
alias sound-slot-0 snd-ice1712
alias snd-card-1 snd-intel8x0
alias sound-slot-1 snd-intel8x0
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
#--- Keep modules from being autocleaned
add options -k snd-card-0
add options -k snd-card-1
-----
My '.asoundrc' file looks like this:
-----
pcm.ice1712 {
type hw
card 0
}
ctl.ice1712 {
type hw
card 0
}
-----
Versions of stuff:
kernel ----- kernel-2.4.26-1.ll.rh90.ccrma compiled for i686
alsa ------- Version 1.0.5a
jack ------- Version 0.98.1
qjackctl --- Version 0.2.9
alsaplayer - Version 0.99.76
Soundcards:
M-Audio Delta 1010 (ice1712)
Motherboard audio (intel8x0)
Okay, I can take a break now. :-)
Any help of any kind will be greatly appreciated!
Peace,
~Jos~
2:07 a.m.
New subject: [linux-audio-user] New install issues (Was: Trouble compiling JACK 0.98.1)
On Sun, 2004-08-15 at 20:22, Jos Laake wrote:
Florian Schmidt wrote:
Go to the alsa pages and locate the page for the ice1712 chip. Down the
bottom there is an .asoundrc file posted for a "hoontech" card. Create a
new .asoundrc from that post. When you run Qjackctl, set the capture and
playback channels to "0". See what happens.
R~
hi
maybe the troubleshooting page on alsa.opensrc.org has some clues :)
flo
Thank you, flo, for the pointer.
Their page was very helpful. I got a lot further with it.
I'm still not up yet, though. Here's where I'm at today...
ALSA recompiled with the soundcards I have.
'alsaplayer' compiled.
'envy24control' compiled.
'Alsaplayer' plays via the alsa output. (Yea!!!)
'envy24control' now runs and sees 'hw:0' but doesn't do
squat other than show me the output volume.
The output was REALLY LOUD and nothing would turn it down.
I discovered that the volume control on 'alsaplayer' would
turn it dowm.
Tried starting 'qjackctl'. It starts 'jackd' but now it
craps out for different reasons. Oh, well, I'll just try
to look at that as "progress". ;-)
Here's the latest trace from 'qjackctl':
------------------------------
19:52:28.367 JACK is starting...
19:52:28.368 /usr/local/bin/jackd -R -dalsa -dhw:0 -r96000 -p1024 -n2
-i2 -o2 -zs
19:52:28.383 JACK was started with PID=21751 (0x54f7).
jackd 0.98.1
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
loading driver ..
apparent rate = 96000
creating alsa driver ... hw:0|hw:0|1024|2|96000|2|2|nomon|swmeter|-|32bit
control device hw:0
configuring for 96000Hz, period = 1024 frames, buffer = 2 periods
ALSA: cannot set channel count to 2 for capture
ALSA: cannot configure capture channel
cannot load driver module alsa
19:52:28.461 JACK was stopped successfully.
19:52:31.472 Could not connect to JACK server as client.
------------------------------
Other info:
All these modules are loaded:
-----
snd-pcm-oss 45192 0 (autoclean)
snd-mixer-oss 16728 2 (autoclean) [snd-pcm-oss]
snd-seq-midi 5152 0 (unused)
snd-seq-midi-event 6272 0 [snd-seq-midi]
snd-seq 50032 3 [snd-seq-midi snd-seq-midi-event]
snd-intel8x0 25196 1
gameport 3380 0 [snd-intel8x0]
snd-ice1712 56260 3
snd-pcm 86432 0 [snd-pcm-oss snd-intel8x0 snd-ice1712]
snd-timer 20996 0 [snd-seq snd-pcm]
snd-page-alloc 9336 0 [snd-intel8x0 snd-pcm]
snd-cs8427 9320 0 [snd-ice1712]
snd-i2c 4660 0 [snd-ice1712 snd-cs8427]
snd-ac97-codec 68188 0 [snd-intel8x0 snd-ice1712]
snd-mpu401-uart 5696 0 [snd-intel8x0 snd-ice1712]
snd-rawmidi 19520 0 [snd-seq-midi snd-mpu401-uart]
snd-seq-device 6220 0 [snd-seq-midi snd-seq snd-rawmidi]
snd-ice17xx-ak4xxx 2760 0 [snd-ice1712]
snd-ak4xxx-adda 5680 0 [snd-ice1712 snd-ice17xx-ak4xxx]
snd 48708 2 [snd-pcm-oss snd-mixer-oss snd-seq-midi
snd-seq-midi-event snd-seq snd-intel8x0 snd-ice1712 snd-pcm snd-timer
snd-cs8427 snd-i2c snd-ac97-codec snd-mpu401-uart snd-rawmidi
snd-seq-device snd-ak4xxx-adda]
soundcore
-----
The pertinent section of my '/etc/modules.conf' looks like this:
-----
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-ice1712
alias sound-slot-0 snd-ice1712
alias snd-card-1 snd-intel8x0
alias sound-slot-1 snd-intel8x0
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
#--- Keep modules from being autocleaned
add options -k snd-card-0
add options -k snd-card-1
-----
My '.asoundrc' file looks like this:
-----
pcm.ice1712 {
type hw
card 0
}
ctl.ice1712 {
type hw
card 0
}
-----
Versions of stuff:
kernel ----- kernel-2.4.26-1.ll.rh90.ccrma compiled for i686
alsa ------- Version 1.0.5a
jack ------- Version 0.98.1
qjackctl --- Version 0.2.9
alsaplayer - Version 0.99.76
Soundcards:
M-Audio Delta 1010 (ice1712)
Motherboard audio (intel8x0)
Okay, I can take a break now. :-)
Any help of any kind will be greatly appreciated!
Peace,
~Jos~
5:08 a.m.
New subject: [linux-audio-user] New install issues (Was: Trouble compiling JACK 0.98.1)
On Mon, 2004-08-16 at 04:51, Russell Hanaghan wrote:
On Sun, 2004-08-15 at 20:22, Jos Laake wrote:
> My '.asoundrc' file looks like this:
> -----
> pcm.ice1712 {
> type hw
> card 0
> }
>
> ctl.ice1712 {
> type hw
> card 0
> }
Go to the alsa pages and locate the page for the
ice1712 chip. Down the
bottom there is an .asoundrc file posted for a "hoontech" card. Create a
new .asoundrc from that post. When you run Qjackctl, set the capture and
playback channels to "0". See what happens.
Out of curiosity, I followed the ALSA card matrix for Hoontech to a page
which has an _identical_ .asoundrc to that posted by Jos.
Is this not the correct one? Do you have a URL, or if small enough
could it be posted?
If you'd like, I'll accept the .asoundrc and any instructions/notes you
have and add them to the ALSA wiki for the Delta1010.
cheers
R
9:45 a.m.
New subject: [linux-audio-user] New install issues (Was: Trouble compiling JACK 0.98.1)
Last Monday 16 August 2004 04:22, Jos Laake was like:
My '.asoundrc' file looks like this:
-----
pcm.ice1712 {
type hw
card 0
}
ctl.ice1712 {
type hw
card 0
}
-----
Don't you ned to define card 1 -> i8x0?
cheers
tim hall
15 Aug
15 Aug
10:44 a.m.
On Sun, 2004-08-15 at 02:28, Jos Laake wrote:
Hi,
I'm rebuilding my Linux Audio box after a card change and system
crash. I know I've seen this problem before but can't remember
what I did to fix it (and that system and all its logs are long gone.)
I'm using a Delta 1010 (not the LT)
I'm using the CCRMA kernel: kernel-2.4.26-1.ll.rh90.ccrma
The latest ALSA release: 1.0.5a
Now I'm compiling JACK 0.98.1 and I get this in the middle of
my './configure' trace:
------------------------------------------------------
checking for pkg-config... /usr/bin/pkg-config
checking for sndfile >= 1.0... Package sndfile was not found in the
pkg-config search path.
Perhaps you should add the directory containing `sndfile.pc'
to the PKG_CONFIG_PATH environment variable
No package 'sndfile' found
configure: WARNING: *** the jackrec example client will not be built
------------------------------------------------------
wha...?
Am I gonna be needing this 'jackrec example client'?
Anybody have a clue-by-4 to throw in my direction? ;-)
You don't need the example client. I think you can turn off compiling
that with a .configure option. Do a ./configure --help to check.
Jan
16 Aug
16 Aug
7:08 a.m.
On Sunday 15 August 2004 08:36 am, Jan Depner wrote:
On Sun, 2004-08-15 at 02:28, Jos Laake wrote:
Doing that first as standard operating procedure for new software is a good
habit to cultivate.
Hi,
I'm rebuilding my Linux Audio box after a card change and system
crash. I know I've seen this problem before but can't remember
what I did to fix it (and that system and all its logs are long gone.)
I'm using a Delta 1010 (not the LT)
I'm using the CCRMA kernel: kernel-2.4.26-1.ll.rh90.ccrma
The latest ALSA release: 1.0.5a
Now I'm compiling JACK 0.98.1 and I get this in the middle of
my './configure' trace:
------------------------------------------------------
checking for pkg-config... /usr/bin/pkg-config
checking for sndfile >= 1.0... Package sndfile was not found in the
pkg-config search path.
Perhaps you should add the directory containing `sndfile.pc'
to the PKG_CONFIG_PATH environment variable
No package 'sndfile' found
configure: WARNING: *** the jackrec example client will not be built
------------------------------------------------------
wha...?
Am I gonna be needing this 'jackrec example client'?
Anybody have a clue-by-4 to throw in my direction? ;-)
You don't need the example client. I think you can turn off compiling
that with a .configure option. Do a ./configure --help to check.
Jan
7481
days inactive
7482
days old
linux-audio-user@lists.linuxaudio.org
9 comments
7 participants
participants (7)
-
Florian Schmidt -
Jan Depner -
John Check -
Jos Laake -
robin fell -
Russell Hanaghan -
tim hall