17 Jan
2012
17 Jan
'12
9:52 p.m.
Hi
I'm trying to build our new tow, luppp, on arch, but it fails. I made it
past the configure stage, after a bit poking around in aur...
As far as I can tell waf can't find lv2/lv2plug.in/ns/ext/event/event.h,
and sure enough it's not there:
atte@blokhus:~/software/Luppp$ ll /usr/include/lv2/lv2plug.in/ns/ext/
total 0
lrwxrwxrwx 1 root root 38 Jan 17 10:45 dynmanifest ->
../../../../../lib/lv2/dynmanifest.lv2
Any idea which package provides that file? Sorry for my ignorance if
this is obvious...
atte@blokhus:~/software/Luppp$ ./waf configure
Setting top to : /home/atte/software/Luppp
Setting out to : /home/atte/software/Luppp/.build
Checking for 'g++' (c++ compiler) : /usr/bin/g++
Checking for program pkg-config : /usr/bin/pkg-config
Checking for 'jack' : yes
Checking for 'sndfile' : yes
Checking for 'gtkmm-2.4' : yes
Checking for 'glibmm-2.4' : yes
Checking for 'fluidsynth' : yes
Checking for 'libconfig++' : yes
Checking for 'lilv-0' : yes
Checking for 'suil-0' : yes
Checking for header lv2.h : yes
Checking for header ladspa.h : yes
'configure' finished successfully (1.797s)
atte@blokhus:~/software/Luppp$ ./waf
Waf: Entering directory `/home/atte/software/Luppp/.build'
[ 3/56] cxx: src/lvtwohost.cpp -> .build/src/lvtwohost.cpp.0.o
[ 7/56] cxx: src/offlineworker.cpp -> .build/src/offlineworker.cpp.0.o
In file included from ../src/lvtwohost.cpp:20:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/event.h: No such file or directory
compilation terminated.
In file included from ../src/offlineworker.cpp:24:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/event.h: No such file or directory
compilation terminated.
Waf: Leaving directory `/home/atte/software/Luppp/.build'
Build failed
-> task failed (exit status 1):
{task 156760556: cxx lvtwohost.cpp -> lvtwohost.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include',
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include', '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include', '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1', '../src/lvtwohost.cpp',
'-c',
'-o', 'src/lvtwohost.cpp.0.o']
-> task failed (exit status 1):
{task 156761196: cxx offlineworker.cpp -> offlineworker.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include',
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include', '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include', '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1', '../src/offlineworker.cpp',
'-c',
'-o', 'src/offlineworker.cpp.0.o']
--
Atte
http://atte.dk http://modlys.dk
17 Jan
17 Jan
10:09 p.m.
On 01/17/2012 09:51 PM, Atte André Jensen wrote:
Hi
I'm trying to build our new tow, luppp, on arch, but it fails. I made it
past the configure stage, after a bit poking around in aur...
As far as I can tell waf can't find lv2/lv2plug.in/ns/ext/event/event.h,
and sure enough it's not there:
atte@blokhus:~/software/Luppp$ ll /usr/include/lv2/lv2plug.in/ns/ext/
total 0
lrwxrwxrwx 1 root root 38 Jan 17 10:45 dynmanifest ->
../../../../../lib/lv2/dynmanifest.lv2
Any idea which package provides that file? Sorry for my ignorance if
this is obvious...
atte@blokhus:~/software/Luppp$ ./waf configure
Setting top to : /home/atte/software/Luppp
Setting out to : /home/atte/software/Luppp/.build
Checking for 'g++' (c++ compiler) : /usr/bin/g++
Checking for program pkg-config : /usr/bin/pkg-config
Checking for 'jack' : yes
Checking for 'sndfile' : yes
Checking for 'gtkmm-2.4' : yes
Checking for 'glibmm-2.4' : yes
Checking for 'fluidsynth' : yes
Checking for 'libconfig++' : yes
Checking for 'lilv-0' : yes
Checking for 'suil-0' : yes
Checking for header lv2.h : yes
Checking for header ladspa.h : yes
'configure' finished successfully (1.797s)
atte@blokhus:~/software/Luppp$ ./waf
Waf: Entering directory `/home/atte/software/Luppp/.build'
[ 3/56] cxx: src/lvtwohost.cpp -> .build/src/lvtwohost.cpp.0.o
[ 7/56] cxx: src/offlineworker.cpp -> .build/src/offlineworker.cpp.0.o
In file included from ../src/lvtwohost.cpp:20:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/event.h: No such file or directory
compilation terminated.
In file included from ../src/offlineworker.cpp:24:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/event.h: No such file or directory
compilation terminated.
Waf: Leaving directory `/home/atte/software/Luppp/.build'
Build failed
-> task failed (exit status 1):
{task 156760556: cxx lvtwohost.cpp -> lvtwohost.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include',
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include', '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include', '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1', '../src/lvtwohost.cpp',
'-c',
'-o', 'src/lvtwohost.cpp.0.o']
-> task failed (exit status 1):
{task 156761196: cxx offlineworker.cpp -> offlineworker.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include',
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include', '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include', '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1',
'../src/offlineworker.cpp', '-c',
'-o', 'src/offlineworker.cpp.0.o']
Hello Atte,
You need the Arch equivalent of lv2-extension-good I think. No idea
where to find it for Arch, I fear there's no package available, not even
in AUR.
Best,
Jeremy
11:38 p.m.
I've the same problem some days ago.
It was solved just building the whole lv2 core from SVN
http://lv2plug.in/trac/wiki/SVN_repository
See at the bottom of this email
Don't know what's the impact to build and install it over an existing lv2
files in Arch.
Maybe you will have to remove pre existing lv2 files before, not sure about
that.
hope this helps
Diego
diego@ruidosa:~/Downloads/lv2/svn/lv2-svn$ ./waf configure
Setting top to :
/home/diego/Downloads/lv2/svn/lv2-svn
Setting out to :
/home/diego/Downloads/lv2/svn/lv2-svn/build
Checking for 'gcc' (c compiler) : /usr/bin/gcc
Checking for 'g++' (c++ compiler) : /usr/bin/g++
Global Configuration
* Install prefix : /usr/local
* Debuggable build : False
* Strict compiler flags : False
* Build documentation : False
Checking for 'gcc' (c compiler) : /usr/bin/gcc
* LV2 bundle directory : /usr/local/lib/lv2
LV2 dynmanifest Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/ext/dynmanifest
* Version : 1.2
* Pkgconfig name :
lv2-lv2plug.in-ns-ext-dynmanifest
LV2 uri-map Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/uri-map
* Version : 1.4
* Pkgconfig name : lv2-lv2plug.in-ns-ext-uri-map
LV2 midi Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/midi
* Version : 1.4
* Pkgconfig name : lv2-lv2plug.in-ns-ext-midi
LV2 presets Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/presets
* Version : 2.2
* Pkgconfig name : lv2-lv2plug.in-ns-ext-presets
LV2 urid Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/urid
* Version : 1.0
* Pkgconfig name : lv2-lv2plug.in-ns-ext-urid
LV2 instance-access Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/ext/instance-access
* Version : 1.4
* Pkgconfig name :
lv2-lv2plug.in-ns-ext-instance-access
LV2 event Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/event
* Version : 1.4
* Pkgconfig name : lv2-lv2plug.in-ns-ext-event
LV2 data-access Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/ext/data-access
* Version : 1.4
* Pkgconfig name :
lv2-lv2plug.in-ns-ext-data-access
LV2 units Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/extensions/units
* Version : 5.4
* Pkgconfig name :
lv2-lv2plug.in-ns-extensions-units
'configure' finished successfully (1.144s)
diego@ruidosa:~/Downloads/lv2/svn/lv2-svn$ ll lv2/ns/ext/event/
total 60
drwxr-xr-x 5 diego diego 4096 2012-01-17 20:35 ./
drwxr-xr-x 26 diego diego 4096 2012-01-06 21:07 ../
drwxr-xr-x 3 diego diego 4096 2012-01-17 20:35 build/
-rw-r--r-- 1 diego diego 11028 2012-01-06 21:07 event.h
-rw-r--r-- 1 diego diego 7298 2012-01-06 21:07 event-helpers.h
-rw-r--r-- 1 diego diego 8269 2012-01-06 21:07 event.ttl
lrwxrwxrwx 1 diego diego 21 2012-01-06 21:07 ext.pc.in -> ../../../../
ext.pc.in
-rw-r--r-- 1 diego diego 3587 2012-01-17 20:35 .lock-waf_linux2_build
-rw-r--r-- 1 diego diego 234 2012-01-06 21:07 manifest.ttl
drwxr-xr-x 6 diego diego 4096 2012-01-06 21:07 .svn/
lrwxrwxrwx 1 diego diego 15 2012-01-06 21:07 waf -> ../../../../waf*
drwxr-xr-x 3 diego diego 4096 2012-01-17 20:35
.waf-1.6.9-fc9ca41d30c7d159ae195d4b2df21256/
lrwxrwxrwx 1 diego diego 23 2012-01-06 21:07 wscript ->
../../../../ext.wscript
2012/1/17 Jeremy Jongepier <jeremy(a)autostatic.com>
On 01/17/2012 09:51 PM, Atte André Jensen wrote:
Hi
I'm trying to build our new tow, luppp, on arch, but it fails. I made it
past the configure stage, after a bit poking around in aur...
As far as I can tell waf can't find
lv2/lv2plug.in/ns/ext/event/**event.h<http://lv2plug.in/ns/ext/event/event.h>
,
and sure enough it's not there:
atte@blokhus:~/software/Luppp$ ll
/usr/include/lv2/lv2plug.in/**ns/ext/<http://lv2plug.in/ns/ext/>
total 0
lrwxrwxrwx 1 root root 38 Jan 17 10:45 dynmanifest ->
../../../../../lib/lv2/**dynmanifest.lv2
Any idea which package provides that file? Sorry for my ignorance if
this is obvious...
atte@blokhus:~/software/Luppp$ ./waf configure
Setting top to : /home/atte/software/Luppp
Setting out to : /home/atte/software/Luppp/.**build
Checking for 'g++' (c++ compiler) : /usr/bin/g++
Checking for program pkg-config : /usr/bin/pkg-config
Checking for 'jack' : yes
Checking for 'sndfile' : yes
Checking for 'gtkmm-2.4' : yes
Checking for 'glibmm-2.4' : yes
Checking for 'fluidsynth' : yes
Checking for 'libconfig++' : yes
Checking for 'lilv-0' : yes
Checking for 'suil-0' : yes
Checking for header lv2.h : yes
Checking for header ladspa.h : yes
'configure' finished successfully (1.797s)
atte@blokhus:~/software/Luppp$ ./waf
Waf: Entering directory `/home/atte/software/Luppp/.**build'
[ 3/56] cxx: src/lvtwohost.cpp -> .build/src/lvtwohost.cpp.0.o
[ 7/56] cxx: src/offlineworker.cpp -> .build/src/offlineworker.cpp.**0.o
In file included from ../src/lvtwohost.cpp:20:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/**event.h<http://lv2plug.in/ns/ext/event/event.h>:
No such file or directory
compilation terminated.
In file included from ../src/offlineworker.cpp:24:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/**event.h<http://lv2plug.in/ns/ext/event/event.h>:
No such file or directory
compilation terminated.
Waf: Leaving directory `/home/atte/software/Luppp/.**build'
Build failed
-> task failed (exit status 1):
{task 156760556: cxx lvtwohost.cpp -> lvtwohost.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include'**,
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include'**, '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/**include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-**print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include'**, '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/**include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/**include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/**include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.**0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1', '../src/lvtwohost.cpp',
'-c',
'-o', 'src/lvtwohost.cpp.0.o']
-> task failed (exit status 1):
{task 156761196: cxx offlineworker.cpp -> offlineworker.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include'**,
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include'**, '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/**include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-**print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include'**, '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/**include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/**include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/**include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.**0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1',
'../src/offlineworker.cpp', '-c',
'-o', 'src/offlineworker.cpp.0.o']
Hello Atte,
You need the Arch equivalent of lv2-extension-good I think. No idea where
to find it for Arch, I fear there's no package available, not even in AUR.
Best,
Jeremy
______________________________**_________________
Linux-audio-user mailing list
Linux-audio-user@lists.**linuxaudio.org<Linux-audio-user@lists.linuxaudio.org>
http://lists.linuxaudio.org/**listinfo/linux-audio-user<http://lists.lin…
18 Jan
18 Jan
12:20 a.m.
lv2core-svn is in the AUR, so you shouldn't need to deal with files.
Just build the package and install:
http://aur.archlinux.org/packages.php?ID=45557
On Wed, Jan 18, 2012 at 7:38 AM, Diego Simak <diego.simak(a)gmail.com> wrote:
I've the same problem some days ago.
It was solved just building the whole lv2 core from SVN
http://lv2plug.in/trac/wiki/SVN_repository
See at the bottom of this email
Don't know what's the impact to build and install it over an existing lv2
files in Arch.
Maybe you will have to remove pre existing lv2 files before, not sure about
that.
hope this helps
Diego
diego@ruidosa:~/Downloads/lv2/svn/lv2-svn$ ./waf configure
Setting top to :
/home/diego/Downloads/lv2/svn/lv2-svn
Setting out to :
/home/diego/Downloads/lv2/svn/lv2-svn/build
Checking for 'gcc' (c compiler) : /usr/bin/gcc
Checking for 'g++' (c++ compiler) : /usr/bin/g++
Global Configuration
* Install prefix : /usr/local
* Debuggable build : False
* Strict compiler flags : False
* Build documentation : False
Checking for 'gcc' (c compiler) : /usr/bin/gcc
* LV2 bundle directory : /usr/local/lib/lv2
LV2 dynmanifest Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/ext/dynmanifest
* Version : 1.2
* Pkgconfig name : lv2-lv2plug.in-ns-ext-dynmanifest
LV2 uri-map Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/uri-map
* Version : 1.4
* Pkgconfig name : lv2-lv2plug.in-ns-ext-uri-map
LV2 midi Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/midi
* Version : 1.4
* Pkgconfig name : lv2-lv2plug.in-ns-ext-midi
LV2 presets Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/presets
* Version : 2.2
* Pkgconfig name : lv2-lv2plug.in-ns-ext-presets
LV2 urid Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/urid
* Version : 1.0
* Pkgconfig name : lv2-lv2plug.in-ns-ext-urid
LV2 instance-access Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/ext/instance-access
* Version : 1.4
* Pkgconfig name :
lv2-lv2plug.in-ns-ext-instance-access
LV2 event Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI : http://lv2plug.in/ns/ext/event
* Version : 1.4
* Pkgconfig name : lv2-lv2plug.in-ns-ext-event
LV2 data-access Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/ext/data-access
* Version : 1.4
* Pkgconfig name : lv2-lv2plug.in-ns-ext-data-access
LV2 units Configuration
* LV2 bundle directory : /usr/local/lib/lv2
* URI :
http://lv2plug.in/ns/extensions/units
* Version : 5.4
* Pkgconfig name :
lv2-lv2plug.in-ns-extensions-units
'configure' finished successfully (1.144s)
diego@ruidosa:~/Downloads/lv2/svn/lv2-svn$ ll lv2/ns/ext/event/
total 60
drwxr-xr-x 5 diego diego 4096 2012-01-17 20:35 ./
drwxr-xr-x 26 diego diego 4096 2012-01-06 21:07 ../
drwxr-xr-x 3 diego diego 4096 2012-01-17 20:35 build/
-rw-r--r-- 1 diego diego 11028 2012-01-06 21:07 event.h
-rw-r--r-- 1 diego diego 7298 2012-01-06 21:07 event-helpers.h
-rw-r--r-- 1 diego diego 8269 2012-01-06 21:07 event.ttl
lrwxrwxrwx 1 diego diego 21 2012-01-06 21:07 ext.pc.in ->
../../../../ext.pc.in
-rw-r--r-- 1 diego diego 3587 2012-01-17 20:35 .lock-waf_linux2_build
-rw-r--r-- 1 diego diego 234 2012-01-06 21:07 manifest.ttl
drwxr-xr-x 6 diego diego 4096 2012-01-06 21:07 .svn/
lrwxrwxrwx 1 diego diego 15 2012-01-06 21:07 waf -> ../../../../waf*
drwxr-xr-x 3 diego diego 4096 2012-01-17 20:35
.waf-1.6.9-fc9ca41d30c7d159ae195d4b2df21256/
lrwxrwxrwx 1 diego diego 23 2012-01-06 21:07 wscript ->
../../../../ext.wscript
2012/1/17 Jeremy Jongepier <jeremy(a)autostatic.com>
--
networking practice for sound environments :: http://nowhere.iamnobody.net
On 01/17/2012 09:51 PM, Atte André Jensen wrote:
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Hi
I'm trying to build our new tow, luppp, on arch, but it fails. I made it
past the configure stage, after a bit poking around in aur...
As far as I can tell waf can't find lv2/lv2plug.in/ns/ext/event/event.h,
and sure enough it's not there:
atte@blokhus:~/software/Luppp$ ll /usr/include/lv2/lv2plug.in/ns/ext/
total 0
lrwxrwxrwx 1 root root 38 Jan 17 10:45 dynmanifest ->
../../../../../lib/lv2/dynmanifest.lv2
Any idea which package provides that file? Sorry for my ignorance if
this is obvious...
atte@blokhus:~/software/Luppp$ ./waf configure
Setting top to : /home/atte/software/Luppp
Setting out to : /home/atte/software/Luppp/.build
Checking for 'g++' (c++ compiler) : /usr/bin/g++
Checking for program pkg-config : /usr/bin/pkg-config
Checking for 'jack' : yes
Checking for 'sndfile' : yes
Checking for 'gtkmm-2.4' : yes
Checking for 'glibmm-2.4' : yes
Checking for 'fluidsynth' : yes
Checking for 'libconfig++' : yes
Checking for 'lilv-0' : yes
Checking for 'suil-0' : yes
Checking for header lv2.h : yes
Checking for header ladspa.h : yes
'configure' finished successfully (1.797s)
atte@blokhus:~/software/Luppp$ ./waf
Waf: Entering directory `/home/atte/software/Luppp/.build'
[ 3/56] cxx: src/lvtwohost.cpp -> .build/src/lvtwohost.cpp.0.o
[ 7/56] cxx: src/offlineworker.cpp -> .build/src/offlineworker.cpp.0.o
In file included from ../src/lvtwohost.cpp:20:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/event.h: No such file or directory
compilation terminated.
In file included from ../src/offlineworker.cpp:24:0:
../src/lvtwohost.hpp:36:47: fatal error:
lv2/lv2plug.in/ns/ext/event/event.h: No such file or directory
compilation terminated.
Waf: Leaving directory `/home/atte/software/Luppp/.build'
Build failed
-> task failed (exit status 1):
{task 156760556: cxx lvtwohost.cpp -> lvtwohost.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include',
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include', '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include', '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1', '../src/lvtwohost.cpp',
'-c',
'-o', 'src/lvtwohost.cpp.0.o']
-> task failed (exit status 1):
{task 156761196: cxx offlineworker.cpp -> offlineworker.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra',
'-fpermissive', '-pthread', '-pthread', '-pthread',
'-pthread',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include',
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include', '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/include', '-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-print-2.0', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include', '-I/usr/include/atk-1.0',
'-I/usr/include/glibmm-2.4', '-I/usr/lib/glibmm-2.4/include',
'-I/usr/include/glib-2.0', '-I/usr/lib/glib-2.0/include',
'-I/usr/include/sigc++-2.0', '-I/usr/lib/sigc++-2.0/include',
'-I/usr/include/cairomm-1.0', '-I/usr/lib/cairomm-1.0/include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng14', '-I/usr/lib/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.0', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1', '-DHAVE_LADSPA_H=1',
'../src/offlineworker.cpp', '-c',
'-o', 'src/offlineworker.cpp.0.o']
Hello Atte,
You need the Arch equivalent of lv2-extension-good I think. No idea where
to find it for Arch, I fear there's no package available, not even in AUR.
Best,
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
8:33 a.m.
On 01/18/2012 12:20 AM, michael noble wrote:
lv2core-svn is in the AUR, so you shouldn't need
to deal with files.
Just build the package and install:
Thanks, that works. Now I just have to figure out how to make loppp do
anything :-)
--
Atte
http://atte.dk http://modlys.dk
11:35 a.m.
On Wed, Jan 18, 2012 at 7:32 AM, Atte André Jensen <atte(a)email.dk> wrote:
Thanks, that works. Now I just have to figure out how
to make loppp do
anything :-)
Good stuff, this may help as to how the GUI is working:
https://github.com/harryhaaren/Luppp/wiki/Interface-Overview
More manual stuff will hopefully be around by the weekend, but I'm pretty
busy moving back into college too, so we'll see :) -Harry
12:04 p.m.
On 01/18/2012 11:35 AM, Harry van Haaren wrote:
Good stuff, this may help as to how the GUI is
working:
https://github.com/harryhaaren/Luppp/wiki/Interface-Overview
Ok thanks. If I click "File->New track", wasn't I supposed to get a new
track, looking something like
https://sites.google.com/site/harryhaaren/Home/trackEmpty.png ? Nothing
happens, no output in the terminal from which I ran run.sh...
--
Atte
http://atte.dk http://modlys.dk
12:16 p.m.
On , Atte André Jensen <atte(a)email.dk> wrote:
Ok thanks. If I click "File->New track",
wasn't I supposed to get a new
track, looking something like
https://sites.google.com/site/harryhaaren/Home/trackEmpty.png ? Nothing
happens, no output in the terminal from which I ran run.sh...
Strange... could you check the previous prints to see if you're being
zombified by JACK? That would explain it, as the JACK thread has to
actually insert the track before the GUI will show the new track. There was
a redraw bug in the
gtkmm code for a little bit, perhaps you're on that revision..?
Also: I'm developing on a daily basis, usually just pushing the devel
branch up at the end of the day. If you're encountering problems try this:
git checkout devel
./waf configure
./waf
./run.sh
Perhaps you'll run into different bugs that way :D -Harry
2:52 p.m.
HI all
Trying to compile in a Ubuntu 11.10. The lv2-extension-good did the trick
for the event.h problem but I 'm still having the "offlineworker.cpp"
problem:
....
../src/lvtwohost.cpp: Na função membro ‘void
Lv2Host::loadPlugin(std::string)’:
../src/lvtwohost.cpp:92:61: aviso: taking address of temporary
[-fpermissive]
../src/lvtwohost.cpp:100:79: aviso: taking address of temporary
[-fpermissive]
[ 5/56] cxx: src/audiosource.cpp -> .build/src/audiosource.cpp.0.o
[ 6/56] cxx: src/audiobuffer.cpp -> .build/src/audiobuffer.cpp.0.o
[ 7/56] cxx: src/offlineworker.cpp -> .build/src/offlineworker.cpp.0.o
[ 8/56] cxx: src/ladspahost.cpp -> .build/src/ladspahost.cpp.0.o
../src/offlineworker.cpp: Na função membro ‘int
OfflineWorker::addTrack(int)’:
../src/offlineworker.cpp:155:1: aviso: no return statement in function
returning non-void [-Wreturn-type]
../src/offlineworker.cpp: Na função membro ‘int
OfflineWorker::loadAudioBuffer(int, int, std::string)’:
../src/offlineworker.cpp:190:45: erro: ‘const class
libconfig::ParseException’ has no member named ‘getFile’
../src/offlineworker.cpp:190:77: aviso: passing ‘const
libconfig::ParseException’ as ‘this’ argument of ‘int
libconfig::ParseException::getLine()’ discards qualifiers [-fpermissive]
../src/offlineworker.cpp:191:42: aviso: passing ‘const
libconfig::ParseException’ as ‘this’ argument of ‘const char*
libconfig::ParseException::getError()’ discards qualifiers [-fpermissive]
../src/offlineworker.cpp:251:7: aviso: unused variable ‘tmpSR’
[-Wunused-variable]
../src/offlineworker.cpp: Na função membro ‘int
OfflineWorker::createNewEffect(int, int, int)’:
../src/offlineworker.cpp:95:1: aviso: control reaches end of non-void
function [-Wreturn-type]
Waf: Leaving directory `/usr/src/Luppp/.build'
Build failed
-> task failed (exit status 1):
{task 3073698988L: cxx offlineworker.cpp -> offlineworker.cpp.0.o}
['/usr/bin/g++', '-pg', '-g', '-ldl', '-Wall',
'-Wextra', '-fpermissive',
'-pthread', '-pthread', '-pthread', '-pthread',
'-I/usr/include/gtk-2.0',
'-I/usr/include/gtk-unix-print-2.0', '-I/usr/include/atk-1.0',
'-I/usr/include/glib-2.0', '-I/usr/lib/i386-linux-gnu/glib-2.0/include',
'-I/usr/include/pango-1.0', '-I/usr/include/cairo',
'-I/usr/include/pixman-1', '-I/usr/include/freetype2',
'-I/usr/include/libpng12', '-I/usr/lib/i386-linux-gnu/gtk-2.0/include',
'-I/usr/include/gdk-pixbuf-2.0', '-I/usr/include/gio-unix-2.0',
'-I/usr/include/gtkmm-2.4', '-I/usr/lib/gtkmm-2.4/include',
'-I/usr/include/atkmm-1.6', '-I/usr/include/giomm-2.4',
'-I/usr/lib/giomm-2.4/include', '-I/usr/include/pangomm-1.4',
'-I/usr/lib/pangomm-1.4/include', '-I/usr/include/gdkmm-2.4',
'-I/usr/lib/gdkmm-2.4/include', '-I/usr/include/glibmm-2.4',
'-I/usr/lib/glibmm-2.4/include', '-I/usr/include/sigc++-2.0',
'-I/usr/lib/sigc++-2.0/include', '-I/usr/include/cairomm-1.0',
'-I/usr/lib/cairomm-1.0/include', '-I/usr/include/lilv-0',
'-I/usr/include/suil-0', '-DHAVE_JACK=1', '-DHAVE_SNDFILE=1',
'-DHAVE_GTKMM=1', '-DHAVE_GLIBMM=1', '-DHAVE_FLUIDSYNTH=1',
'-DHAVE_LIBCONFIG=1', '-DHAVE_LILV=1', '-DHAVE_SUIL=1',
'-DHAVE_LV2_H=1',
'-DHAVE_LADSPA_H=1', '../src/offlineworker.cpp', '-c',
'-o',
'src/offlineworker.cpp.0.o']
Thanks in advace
2012/1/18 <harryhaaren(a)gmail.com>
On , Atte André Jensen <atte(a)email.dk> wrote:
--
Daniel Roviriego
(21) 35920701
(21) 99561654
M2D multi_meios
www.m2dmultimeios.com.br
Ok thanks. If I click "File->New
track", wasn't I supposed to get a new
track, looking something like
https://sites.google.com/site/harryhaaren/Home/trackEmpty.png ? Nothing
happens, no output in the terminal from which I ran run.sh...
Strange... could you check the previous prints to see if you're being
zombified by JACK? That would explain it, as the JACK thread has to
actually insert the track before the GUI will show the new track. There was
a redraw bug in the
gtkmm code for a little bit, perhaps you're on that revision..?
Also: I'm developing on a daily basis, usually just pushing the devel
branch up at the end of the day. If you're encountering problems try this:
git checkout devel
./waf configure
./waf
./run.sh
Perhaps you'll run into different bugs that way :D -Harry
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
3:02 p.m.
On , Daniel Roviriego <danifernando(a)gmail.com> wrote:
still having the "offlineworker.cpp" problem:
Update your version of libconfig to 1.4.8 or greater. :) -Harry
4:39 p.m.
Hi Harry..
Updating libconfig got me going , that first error passed..but now:
../src/g_clipselector.cpp:64:1: aviso: unused parameter ‘masterConstructor’
[-Wunused-parameter]
../src/g_clipselector.cpp: Na função membro ‘virtual bool
ClipSelector::on_expose_event(GdkEventExpose*)’:
../src/g_clipselector.cpp:169:70: aviso: comparison between signed and
unsigned integer expressions [-Wsign-compare]
../src/g_clipselector.cpp:108:9: aviso: unused variable ‘width’
[-Wunused-variable]
../src/g_clipselector.cpp:109:9: aviso: unused variable ‘height’
[-Wunused-variable]
../src/g_clipselector.cpp: No escopo global:
../src/g_clipselector.cpp:300:6: aviso: unused parameter ‘x’
[-Wunused-parameter]
../src/g_clipselector.cpp:300:6: aviso: unused parameter ‘info’
[-Wunused-parameter]
[54/57] cxx: src/g_trackoutput.cpp -> .build/src/g_trackoutput.cpp.0.o
../src/g_masteroutput.cpp: Na função membro ‘virtual bool
GMasterOutput::on_expose_event(GdkEventExpose*)’:
../src/g_masteroutput.cpp:109:23: aviso: unused variable ‘state’
[-Wunused-variable]
[55/57] cxx: src/main.cpp -> .build/src/main.cpp.1.o
../src/g_trackoutput.cpp: Na função membro ‘bool
TrackOutput::onMouseMove(GdkEventMotion*)’:
../src/g_trackoutput.cpp:194:23: aviso: unused variable ‘state’
[-Wunused-variable]
[56/57] cxxstlib: .build/src/top.cpp.0.o .build/src/rtqueue.cpp.0.o
.build/src/lvtwohost.cpp.0.o .build/src/audioqueue.cpp.0.o
.build/src/audiosource.cpp.0.o .build/src/audiobuffer.cpp.0.o
.build/src/offlineworker.cpp.0.o .build/src/ladspahost.cpp.0.o
.build/src/bufferaudiosource.cpp.0.o
.build/src/fluidsynthaudiosource.cpp.0.o
.build/src/whitenoiseaudiosource.cpp.0.o .build/src/trancegate.cpp.0.o
.build/src/mixer.cpp.0.o .build/src/effect.cpp.0.o
.build/src/beatsmash.cpp.0.o .build/src/statestore.cpp.0.o
.build/src/engineevent.cpp.0.o .build/src/audiotrack.cpp.0.o
.build/src/time.cpp.0.o .build/src/controller.cpp.0.o
.build/src/audiosinkoutput.cpp.0.o .build/src/jackclient.cpp.0.o
.build/src/g_window.cpp.0.o .build/src/g_track.cpp.0.o
.build/src/g_buffersource.cpp.0.o .build/src/g_widgets.cpp.0.o
.build/src/g_waveview.cpp.0.o .build/src/g_masterprogress.cpp.0.o
.build/src/g_reverb.cpp.0.o .build/src/g_lvtwodisplay.cpp.0.o
.build/src/g_fileselector.cpp.0.o .build/src/g_effectselector.cpp.0.o
.build/src/g_instrumentselector.cpp.0.o .build/src/g_beatsmash.cpp.0.o
.build/src/g_widgetbase.cpp.0.o .build/src/g_statestore.cpp.0.o
.build/src/g_equalizer.cpp.0.o .build/src/g_transient.cpp.0.o
.build/src/g_progress.cpp.0.o .build/src/g_limiter.cpp.0.o
.build/src/g_compressor.cpp.0.o .build/src/g_frequencygraph.cpp.0.o
.build/src/g_titlebar.cpp.0.o .build/src/g_block.cpp.0.o
.build/src/g_mute.cpp.0.o .build/src/g_lowpass.cpp.0.o
.build/src/g_highpass.cpp.0.o .build/src/g_rec.cpp.0.o
.build/src/g_solo.cpp.0.o .build/src/g_fader.cpp.0.o
.build/src/g_dial.cpp.0.o .build/src/g_clipselector.cpp.0.o
.build/src/g_masteroutput.cpp.0.o .build/src/g_trackoutput.cpp.0.o ->
.build/libengine_gui.a
[57/57] cxxprogram: .build/src/main.cpp.1.o -> .build/luppp
./libengine_gui.a(lvtwohost.cpp.0.o): In function `Lilv::uri_to_path(char
const*)':
/usr/include/lilv-0/lilv/lilvmm.hpp:24: multiple definition of
`Lilv::uri_to_path(char const*)'
./libengine_gui.a(offlineworker.cpp.0.o):/usr/include/lilv-0/lilv/lilvmm.hpp:24:
first defined here
collect2: ld returned 1 exit status
Waf: Leaving directory `/usr/src/Luppp/.build'
Build failed
-> task failed (exit status 1):
{task 151160204: cxxprogram main.cpp.1.o -> luppp}
['/usr/bin/g++', 'src/main.cpp.1.o', '-o',
'/usr/src/Luppp/.build/luppp',
'-Wl,-Bstatic', '-L.', '-lengine_gui', '-Wl,-Bdynamic',
'-ljack',
'-lsndfile', '-lgtkmm-2.4', '-latkmm-1.6', '-lgdkmm-2.4',
'-lgiomm-2.4',
'-lpangomm-1.4', '-lgtk-x11-2.0', '-lglibmm-2.4',
'-lcairomm-1.0',
'-lsigc-2.0', '-lgdk-x11-2.0', '-latk-1.0', '-lgio-2.0',
'-lpangoft2-1.0',
'-lpangocairo-1.0', '-lgdk_pixbuf-2.0', '-lcairo',
'-lpango-1.0',
'-lfreetype', '-lfontconfig', '-lgobject-2.0',
'-lgmodule-2.0',
'-lgthread-2.0', '-lrt', '-lglib-2.0', '-lfluidsynth',
'-lglibmm-2.4',
'-lgobject-2.0', '-lsigc-2.0', '-lgthread-2.0', '-lrt',
'-lglib-2.0',
'-lconfig++', '-llilv-0', '-ldl', '-lsuil-0',
'-pthread', '-pthread',
'-pthread', '-pthread']
Thanks in again (really look forward for playing with it..)
cheers
2012/1/18 <harryhaaren(a)gmail.com>
On , Daniel Roviriego <danifernando(a)gmail.com>
wrote:
still having the "offlineworker.cpp" problem:
Update your version of libconfig to 1.4.8 or greater. :) -Harry
--
Daniel Roviriego
(21) 35920701
(21) 99561654
M2D multi_meios
www.m2dmultimeios.com.br
4:43 p.m.
https://github.com/harryhaaren/Luppp/issues/21
That will fix it. -Harry
On , Daniel Roviriego <danifernando(a)gmail.com> wrote:
Hi Harry..
Updating libconfig got me going , that first error
passed..but now:
../src/g_clipselector.cpp:64:1: aviso: unused
parameter 'masterConstructor' [-Wunused-parameter]
../src/g_clipselector.cpp: Na função membro 'virtual bool
ClipSelector::on_expose_event(GdkEventExpose*)':
../src/g_clipselector.cpp:169:70: aviso: comparison
between signed and
unsigned integer expressions [-Wsign-compare]
../src/g_clipselector.cpp:108:9: aviso: unused variable 'width'
[-Wunused-variable]
../src/g_clipselector.cpp:109:9: aviso: unused variable 'height'
[-Wunused-variable]
../src/g_clipselector.cpp: No escopo global:
../src/g_clipselector.cpp:300:6: aviso: unused parameter 'x'
[-Wunused-parameter]
../src/g_clipselector.cpp:300:6: aviso: unused parameter 'info'
[-Wunused-parameter]
[54/57] cxx: src/g_trackoutput.cpp ->
.build/src/g_trackoutput.cpp.0.o
../src/g_masteroutput.cpp: Na função membro 'virtual bool
GMasterOutput::on_expose_event(GdkEventExpose*)':
../src/g_masteroutput.cpp:109:23: aviso: unused variable 'state'
[-Wunused-variable]
[55/57] cxx: src/main.cpp ->
.build/src/main.cpp.1.o
../src/g_trackoutput.cpp: Na função membro 'bool
TrackOutput::onMouseMove(GdkEventMotion*)':
../src/g_trackoutput.cpp:194:23: aviso: unused variable 'state'
[-Wunused-variable]
[56/57]
cxxstlib: .build/src/top.cpp.0.o .build/src/rtqueue.cpp.0.o .build/src/lvtwohost.cpp.0.o
.build/src/audioqueue.cpp.0.o .build/src/audiosource.cpp.0.o
.build/src/audiobuffer.cpp.0.o .build/src/offlineworker.cpp.0.o
.build/src/ladspahost.cpp.0.o .build/src/bufferaudiosource.cpp.0.o
.build/src/fluidsynthaudiosource.cpp.0.o .build/src/whitenoiseaudiosource.cpp.0.o
.build/src/trancegate.cpp.0.o .build/src/mixer.cpp.0.o .build/src/effect.cpp.0.o
.build/src/beatsmash.cpp.0.o .build/src/statestore.cpp.0.o .build/src/engineevent.cpp.0.o
.build/src/audiotrack.cpp.0.o .build/src/time.cpp.0.o .build/src/controller.cpp.0.o
.build/src/audiosinkoutput.cpp.0.o .build/src/jackclient.cpp.0.o
.build/src/g_window.cpp.0.o .build/src/g_track.cpp.0.o .build/src/g_buffersource.cpp.0.o
.build/src/g_widgets.cpp.0.o .build/src/g_waveview.cpp.0.o
.build/src/g_masterprogress.cpp.0.o .build/src/g_reverb.cpp.0.o
.build/src/g_lvtwodisplay.cpp.0.o .build/src/g_fileselector.cpp.0.o
.build/src/g_effectselector.cpp.0.o .build/src/g_instrumentselector.cpp.0.o
.build/src/g_beatsmash.cpp.0.o .build/src/g_widgetbase.cpp.0.o
.build/src/g_statestore.cpp.0.o .build/src/g_equalizer.cpp.0.o
.build/src/g_transient.cpp.0.o .build/src/g_progress.cpp.0.o .build/src/g_limiter.cpp.0.o
.build/src/g_compressor.cpp.0.o .build/src/g_frequencygraph.cpp.0.o
.build/src/g_titlebar.cpp.0.o .build/src/g_block.cpp.0.o .build/src/g_mute.cpp.0.o
.build/src/g_lowpass.cpp.0.o .build/src/g_highpass.cpp.0.o .build/src/g_rec.cpp.0.o
.build/src/g_solo.cpp.0.o .build/src/g_fader.cpp.0.o .build/src/g_dial.cpp.0.o
.build/src/g_clipselector.cpp.0.o .build/src/g_masteroutput.cpp.0.o
.build/src/g_trackoutput.cpp.0.o
-> .build/libengine_gui.a
[57/57] cxxprogram: .build/src/main.cpp.1.o ->
.build/luppp
./libengine_gui.a(lvtwohost.cpp.0.o): In function `Lilv::uri_to_path(char
const*)':
/usr/include/lilv-0/lilv/lilvmm.hpp:24: multiple definition of
`Lilv::uri_to_path(char const*)'
./libengine_gui.a(offlineworker.cpp.0.o):/usr/include/lilv-0/lilv/lilvmm.hpp:24:
first
defined here
collect2: ld returned 1 exit status
Waf: Leaving directory `/usr/src/Luppp/.build'
Build failed
-> task failed (exit status 1):
{task 151160204: cxxprogram main.cpp.1.o -> luppp}
['/usr/bin/g++', 'src/main.cpp.1.o', '-o',
'/usr/src/Luppp/.build/luppp', '-Wl,-Bstatic', '-L.',
'-lengine_gui', '-Wl,-Bdynamic', '-ljack', '-lsndfile',
'-lgtkmm-2.4', '-latkmm-1.6', '-lgdkmm-2.4',
'-lgiomm-2.4', '-lpangomm-1.4', '-lgtk-x11-2.0',
'-lglibmm-2.4', '-lcairomm-1.0', '-lsigc-2.0',
'-lgdk-x11-2.0', '-latk-1.0', '-lgio-2.0',
'-lpangoft2-1.0', '-lpangocairo-1.0', '-lgdk_pixbuf-2.0',
'-lcairo', '-lpango-1.0', '-lfreetype', '-lfontconfig',
'-lgobject-2.0', '-lgmodule-2.0', '-lgthread-2.0', '-lrt',
'-lglib-2.0', '-lfluidsynth', '-lglibmm-2.4',
'-lgobject-2.0', '-lsigc-2.0', '-lgthread-2.0', '-lrt',
'-lglib-2.0', '-lconfig++', '-llilv-0', '-ldl',
'-lsuil-0', '-pthread', '-pthread', '-pthread',
'-pthread']
Thanks in again (really look forward for playing with
it..)
cheers
2012/1/18 harryhaaren(a)gmail.com>
On , Daniel Roviriego danifernando(a)gmail.com>
wrote:
still having the "offlineworker.cpp" problem:
Update your version of libconfig to 1.4.8 or greater.
:) -Harry
--
Daniel Roviriego
(21) 35920701
(21) 99561654
M2D multi_meios
www.m2dmultimeios.com.br
19 Jan
19 Jan
8:08 a.m.
On 01/18/2012 12:16 PM, harryhaaren(a)gmail.com wrote:
On , Atte André Jensen <atte(a)email.dk> wrote:
No, I'm not zombified...
atte@blokhus:~/software/Luppp$ ./run.sh
Luppp 2.0
Top() BPM = 127
Creating MASTER AudioTrack ID: -1
Time:process() doing 4th list!
Last used dir = /home/atte
(luppp:5121): Gtk-WARNING **: Unknown property:
gtkmm__GtkViewport.vscroll-policy
ClipSelector MASTER constructor called!
Rotation = 0 Arc @ 7, -38
Ok thanks. If I click "File->New
track", wasn't I supposed to get a
new track, looking something like
https://sites.google.com/site/harryhaaren/Home/trackEmpty.png ? Nothing
happens, no output in the terminal from which I ran run.sh...
Strange... could you
check the previous prints to see if you're being
zombified by JACK? That would explain it, as the JACK thread has to
actually insert the track before the GUI will show the new track. There
was a redraw bug in the
gtkmm code for a little bit, perhaps you're on that revision..? Also: I'm developing on a daily basis, usually
just pushing the devel
branch up at the end of the day. If you're encountering problems try this:
git checkout devel
atte@blokhus:~/software/Luppp$ git checkout devel
Branch devel set up to track remote branch devel from origin.
Switched to a new branch 'devel'
atte@blokhus:~/software/Luppp$
That all? Wasn't I supposed to get some new stuff downloaded?
./waf configure
./waf
./run.sh
Perhaps you'll run into different bugs that way :D -Harry
It's the same, but not surprising, since I didn't get any new files...
--
Atte
http://atte.dk http://modlys.dk
20 Jan
20 Jan
1:26 a.m.
On Thu, Jan 19, 2012 at 7:07 AM, Atte André Jensen <atte(a)email.dk> wrote:
That all? Wasn't I supposed to get some new stuff
downloaded?
Perhaps you might have to "git pull" the new branch in, but once its local
it should just be that. Depends on how you cloned the repo in the first
place, or how you got the souce.
It's the same, but not surprising, since I
didn't get any new files...
Mhmmm... try doing a "git pull". Or check with a tool like
"gitg" to see
the status of the branches ( make sure to select "All Branches" in the drop
down to see the branches in the repo, not just local ones)
Gitg screeny here:
https://sites.google.com/site/harryhaaren/Home/gitg_all_branches.png
Best, -Harry
18 Jan
18 Jan
12:59 a.m.
On Tue, Jan 17, 2012 at 8:51 PM, Atte André Jensen <atte(a)email.dk> wrote:
As far as I can tell waf can't find
lv2/lv2plug.in/ns/ext/event/event.h
Thanks, I'll make a note to check each lv2 extension header that is
depended on as well as lv2.h
Putting a new issue up on the GitHub issue tracker now...
Cheers, -Harry
4874
days inactive
4877
days old
linux-audio-user@lists.linuxaudio.org
14 comments
7 participants
participants (7)
-
Atte André Jensen -
Daniel Roviriego -
Diego Simak -
Harry van Haaren -
harryhaaren＠gmail.com
-
Jeremy Jongepier -
michael noble