14 Apr
2012
14 Apr
'12
12:53 p.m.
Hello all.
I havent had to post anything to such a wide variety of knowledegable
people before so forgive me if I have broken any etiquette, but I have a
pretty big problem.
I recently spent a big wad of cash building a rig based on the
GA-Z68AP-D3 motherboard. I built it primarily for audio production on
linux using my Maudio Delta 66 Rev B sound card. The card works fine
when no graphics card is installed but as soon as I install my NVIDIA
7900GTO card in the PCIex16 slot - alsa fails to see the soundcard. All
I get listed in aplay -l is my onboard sound or, if I switch off onboard
sound, no cards listed.
I have been on the Ubuntu Studio forums (this is the main OS I use for
Audio) but have been unable to get a solution.
I have tried a few options. I have tried the 3 series kernel from
upstream but that didnt help. I have tried installing the proprietary
driver for th NVIDIA card which has allowed use of Message Signalled
Interrupts but that has not helped. I have updated the BIOS version to
the current one from the manufacturers website. I am also on my second
motherboard as the first one was returned due to a defect.
I have also tested the sound card and graphics card on a friends Asus
P8Z68 Deluxe motherboard. The soundcard is detected from a live CD with
both my NVIDIA card installed and my friends ATI card. So it appears not
to be an issue of defective card.
I have also tested the set up with Ubuntu 11.10 and AV Linux. They have
the same basis so no difference.
I am pretty much out of options at this point. I dont know what to do.
Using the system with just the ondboard graphics is not ideal as the
Mobo only has HDMI out - which means I would need to buy a new monitor
as mine doesnt support HDMI.
Below is some useful output
ric@Ric:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ric@Ric:~$ lspci -vvv
00:00.0 Host bridge: Intel Corporation Device 0100 (rev 09)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port
(rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: f8000000-faffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:02.0 Display controller: Intel Corporation Device 0112 (rev 09)
Subsystem: Giga-byte Technology Device d000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 12
Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ff00 [size=64]
Capabilities: <access denied>
00:16.0 Communication controller: Intel Corporation Cougar Point HECI
Controller #1 (rev 04)
Subsystem: Giga-byte Technology Device 1c3a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 12
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host
Controller #2 (rev 05) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation Cougar Point High Definition
Audio Controller (rev 05)
Subsystem: Giga-byte Technology Device a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port
1 (rev b5)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: cc000000-cc1fffff
Prefetchable memory behind bridge: 00000000cc200000-00000000cc3fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port
2 (rev b5)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port
3 (rev b5)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fbd00000-00000000fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) (prog-if 01)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host
Controller #1 (rev 05) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation Device 1c44 (rev 05)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface: Intel Corporation Cougar Point 4 port SATA IDE
Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fd00 [size=4]
Region 2: I/O ports at fc00 [size=8]
Region 3: I/O ports at fb00 [size=4]
Region 4: I/O ports at fa00 [size=16]
Region 5: I/O ports at f900 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel modules: i2c-i801
00:1f.5 IDE interface: Intel Corporation Cougar Point 2 port SATA IDE
Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f700 [size=8]
Region 1: I/O ports at f600 [size=4]
Region 2: I/O ports at f500 [size=8]
Region 3: I/O ports at f400 [size=4]
Region 4: I/O ports at f300 [size=16]
Region 5: I/O ports at f200 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900
GT/GTO] (rev a1)
Subsystem: nVidia Corporation Device 042b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at cf00 [size=128]
[virtual] Expansion ROM at fa000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia, nvidiafb, nouveau
03:00.0 USB Controller: Device 1b6f:7023 (rev 01) (prog-if 30)
Subsystem: Giga-byte Technology Device 5007
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbef8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
Subsystem: Giga-byte Technology Device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fbdff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbdf8000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8168
Kernel modules: r8168
05:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev
30) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 4 bytes
Bus: primary=05, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:00.0 Multimedia audio controller: VIA Technologies Inc. ICE1712
[Envy24] PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc. Device d632
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at dfc0 [size=32]
Region 1: I/O ports at dff0 [size=16]
Region 2: I/O ports at dfe0 [size=16]
Region 3: I/O ports at df80 [size=64]
Capabilities: <access denied>
Kernel modules: snd-ice1712
ric@Ric:~$ cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 126 0 0 0 IO-APIC-edge timer
1: 31 0 259 18 IO-APIC-edge i8042
4: 2 0 0 0 IO-APIC-edge
7: 0 0 0 0 IO-APIC-edge
parport0
8: 1 0 0 0 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
17: 0 0 0 0 IO-APIC-fasteoi
xhci_hcd:usb3
18: 244 0 0 3558 IO-APIC-fasteoi
ehci_hcd:usb1
19: 8779 0 0 0 IO-APIC-fasteoi
ata_piix, ata_piix
22: 732 0 779 0 IO-APIC-fasteoi
HDA Intel
23: 1206 0 0 0 IO-APIC-fasteoi
ehci_hcd:usb2
29: 651 10818 0 0 PCI-MSI-edge nvidia
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 21411 21545 9745 7132 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance
monitoring interrupts
PND: 0 0 0 0 Performance pending work
RES: 290 381 302 269 Rescheduling interrupts
CAL: 80 148 153 155 Function call interrupts
TLB: 234 380 323 277 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 Machine check polls
ERR: 0
MIS: 0
ric@Ric:~$ cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xfbff8000 irq 22
ric@Ric:~$ uname -r
2.6.32-38-preempt
ric@Ric:~$ cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.21.
Again I apologise if this is the wrong place to post this but I am now
pretty desperate.
Any help will be gratefully received.
Many Thanks
14 Apr
14 Apr
1:04 p.m.
On Sat, 14 Apr 2012 11:53:33 +0100
sylos <richardsill321(a)btinternet.com> wrote:
Hello all.
I havent had to post anything to such a wide variety of knowledegable
people before so forgive me if I have broken any etiquette, but I
have a pretty big problem.
I recently spent a big wad of cash building a rig based on the
GA-Z68AP-D3 motherboard. I built it primarily for audio production on
linux using my Maudio Delta 66 Rev B sound card. The card works fine
when no graphics card is installed but as soon as I install my NVIDIA
7900GTO card in the PCIex16 slot - alsa fails to see the soundcard.
All I get listed in aplay -l is my onboard sound or, if I switch off
onboard sound, no cards listed.
Hi, mostly guessing, but have you tried plugging the cards in different
PCI slots? Ideally you'd also want your sound card to have a lower IRQ
than your video card - you can find out IRQs with "cat /proc/interrupts"
renato
1:25 p.m.
Hello there and thank you for looking.
I have tried in both of the available PCI slots and found no difference.
I know these Z68 boards use an ITE PCI to PCIe bridge chip and I suspect
this might be the source of the problem.
Any other ideas?
Cheers
1:45 p.m.
sylos wrote:
The card works fine when no graphics card is installed
but as soon as
I install my NVIDIA 7900GTO card in the PCIex16 slot - alsa fails to
see the soundcard.
06:00.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI
Multi-Channel I/O Controller (rev 02)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at dfc0 [size=32]
Region 1: I/O ports at dff0 [size=16]
Region 2: I/O ports at dfe0 [size=16]
Region 3: I/O ports at df80 [size=64]
Well, it's there, and all resources are assigned.
After running "rmmod snd-ice1712; modprobe snd-ice1712" as root, are
there any error messages in the system log (at the end of the output
of dmesg)?
Regards,
Clemens
1:48 p.m.
Hello there.
As it happens there are:
[ 7838.014939] ICE1712 0000:06:00.0: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 7838.014967] ice1712: Using board model M Audio Delta 66
[ 7838.014971] invalid EEPROM (size = 145)
[ 7838.014987] ICE1712 0000:06:00.0: PCI INT A disabled
[ 7838.014996] ICE1712: probe of 0000:06:00.0 failed with error -5
Not sure what any of that means though.
Cheers
2:01 p.m.
tried changing the "prevent abnormal drivers.." section of
/etc/modprobe.d/alsa-base.conf
to read
"options snd-ice1712 model=delta1010LT"
And then removed then reloaded the kernle module but got this output
instead:
[ 8441.808551] ICE1712 0000:06:00.0: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 8441.808580] ice1712: No matching model found for ID 0x0
[ 8441.808585] invalid EEPROM (size = 145)
[ 8441.808601] ICE1712 0000:06:00.0: PCI INT A disabled
[ 8441.808611] ICE1712: probe of 0000:06:00.0 failed with error -5
20 Apr
20 Apr
8:46 a.m.
Sorry - somehow posted this is a new unnamed thread. Here it is in its
rightful place.
Hello again everyone.
So I have blundered into a work around for this problem that I want to share and
hopefully maybe pass the issue on upstream to see if the issue can be resolved properly.
So to recap:
MOBO: Gigabyte GA-Z68AP-D3
Maudio Delta 66 Installed in PCI slot.
Card works fine running with the onboard graphics (provided by the intel i5 2500K CPU).
Install MSI (NVIDIA) 7900GTO PCIe graphics card into PCIe x16 slot.
Card not recognised under aplay -l or cat /asound/cards BUT is registered under lspci
-vvv.
dmesg shows the following on boot:
[ 7838.014939] ICE1712 0000:06:00.0: PCI INT A -> GSI 19 (level, low) ->
IRQ 19
[ 7838.014967] ice1712: Using board model M Audio Delta 66
[ 7838.014971] invalid EEPROM (size = 145)
[ 7838.014987] ICE1712 0000:06:00.0: PCI INT A disabled
[ 7838.014996] ICE1712: probe of 0000:06:00.0 failed with error -5
Tried this with varying kernels and NVIDIA drivers with no fix.
NOW....
Removing the PCIe graphics card and installing an old NVIDIA FX5500 PCI card in the other
PCI slot allowed the Maudio card to be recognised (although unusable due to the NVIDIA
stealling the bandwidth). So I tried installing and old Soundblaster PCI card into the
other slot with my Maudio next to it. This allows both to be recognised under aplay- l as
below:
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: M66 [M Audio Delta 66], device 0: ICE1712 multi [ICE1712 multi]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ric@ric:~$ gksudo gedit /etc/modprobe.d/nvidia.conf
ric@ric:~$ sudo modprobe snd-emu10k1
[sudo] password for ric:
ric@ric:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: M66 [M Audio Delta 66], device 0: ICE1712 multi [ICE1712 multi]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Live [SB Live! Value [CT4670]], device 0: emu10k1 [ADC Capture/Standard PCM
Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 2: Live [SB Live! Value [CT4670]], device 2: emu10k1 efx [Multichannel Capture/PT
Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 2: Live [SB Live! Value [CT4670]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
Now, you can see above that both the Maudio and the Soundblaster are being identified as
the same Device number: 0. So using this configuration fails (no way to choose between the
two and it never output to the Maudio whatever I tried). So I blacklisted the snd-emu10k1
driver in /etc/modprobe.d/blacklist.conf and that did the job - now only the Maudio is
shown (and onboard if I enable it in BIOS as above). Maudio is now useable.
Now, I dont know why or how this would be happening. My only thought is that there is an
issue at kernel level either with how the PCI slots are being addressed OR with the snd
modules themselves. I should point out that when I tried an old PCI modem card it didnt do
the job - the modem showed up in lspci -vvv but the eeprom error was still showing in
dmesg and the Maudio was again not detected.
So Im putting the information out there in the hope that someone with more knowledge than
me may be able to help diagnose the real cause of the issue and perhaps we can feed it
into the development cycle for a fix.
If any more info is needed then I am happy to take the time (with instructions as I am a
dimwit) to do additional testing and information gathering.
Thanks all.
4604
days inactive
4610
days old
linux-audio-user@lists.linuxaudio.org
6 comments
3 participants
participants (3)
-
Clemens Ladisch -
Renato -
sylos