I'm using a Tascam US-122 with a laptop running FC5/CCRMA. I need to have the USX2Y module loaded with an "nrpacks=2" parameter, rather than its default of '4'. Normally, I would put this in /etc/modprobe.conf - but the device is loaded not at startup, but instead by udev. There are no entries for the driver in modprobe.conf, and I can't seem to find where to put the parameter within udev's folders. Any ideas on where this setting should go? I've been manually unloading the driver, then reloading it with that option, but I'm trying to avoid that kind of work on stage. Thanks! -- daneasley(a)gmail.com dan(a)towndowner.com dan(a)burntpossum.com http://towndowner.com http://burntpossum.com