12 Jan
2011
12 Jan
'11
3:10 a.m.
I've tested ardour2 and ardour3. What happens is that I save the
session with one track, and when I close ardour and open it again, the
track is connected to more inputs and outputs then it was when I've hit
save. I use jackdbus + M-Audio Delta 1010LT. Is there any other info I
should give? Thanx!
12 Jan
12 Jan
3:17 a.m.
2011/1/11 Goran Mekić <meka(a)ns-linux.org>rg>:
I've tested ardour2 and ardour3. What happens
is that I save the session
with one track, and when I close ardour and open it again, the track is
connected to more inputs and outputs then it was when I've hit save. I use
jackdbus + M-Audio Delta 1010LT. Is there any other info I should give?
(1) wrong mailing list (ardour-users would be more appropriate)
(2) please provide a LOT more details about the connections "before" and
"after"
6:31 a.m.
On 01/12/11 04:17, Paul Davis wrote:
2011/1/11 Goran Mekić<meka(a)ns-linux.org>rg>:
I suspected it's not
ardour, but here it is, anyway.
I've tested ardour2 and ardour3. What
happens is that I save the session
with one track, and when I close ardour and open it again, the track is
connected to more inputs and outputs then it was when I've hit save. I use
jackdbus + M-Audio Delta 1010LT. Is there any other info I should give?
(1) wrong
mailing list (ardour-users would be more appropriate) (2) please provide a LOT more details about the
connections "before" and "after"
OK, here's what I have
(more tracks to show it's not always the same,
but for the track with the same name, additional connections are always
the same)
Mono tracks:
- meka guitar (dry)
- jova guitar (dry)
Stereo tracks:
- meka guitar (wet)
- jova guitar (wet)
Connections before:
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_9
- system:capture_10 -> ardour:jova guitar (dry)/audio_in 1
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_10
- system:capture_9 -> ardour:meka guitar (wet)/audio_in 1
- system:capture_10 -> ardour:meka guitar (wet)/audio_in 2
- ardour:meka guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:meka guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
- system:capture_9 -> ardour:jova guitar (wet)/audio_in 1
- system:capture_10 -> ardour:jova guitar (wet)/audio_in 2
- ardour:jova guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:jova guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
Connections after:
- system:capture_3 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_4 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_10 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_11 -> ardour:meka guitar (dry)/audio_in 1
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_9
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_10
- ardour:meka guitar (dry)/audio_out 1 -> ardour:master/audio_in 1
- system:capture_9 -> ardour:jova guitar (dry)/audio_in 1
- system:capture_10 -> ardour:jova guitar (dry)/audio_in 1
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_9
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_10
- system:capture_5 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_6 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_6 -> ardour:meka guitar (dry)/audio_in 2
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_10 -> ardour:meka guitar (dry)/audio_in 2
- ardour:jova guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:jova guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
9:40 a.m.
Hi Goran!
Looks like you went to a lot of effort documenting the connections when you
could've got it done near instantly and more accurately just by issuing
jack_lsp -c
Before and after then copy/pasting the results, which the las neglected to
mention in his response so maybe he presumed you knew said command?
2011/1/12 Goran Mekić <meka(a)ns-linux.org>
On 01/12/11 04:17, Paul Davis wrote:
2011/1/11 Goran Mekić<meka(a)ns-linux.org>rg>:
I suspected it's not ardour, but here it is, anyway.
(2) please provide a LOT more details about the connections "before" and
I've tested ardour2 and ardour3. What
happens is that I save the
session
with one track, and when I close ardour and open it again, the track is
connected to more inputs and outputs then it was when I've hit save. I
use
jackdbus + M-Audio Delta 1010LT. Is there any other info I should give?
(1) wrong mailing list (ardour-users would be more appropriate)
"after"
OK, here's what I have (more tracks to show it's not always the same, but
for the track with the same name, additional connections are always the
same)
Mono tracks:
- meka guitar (dry)
- jova guitar (dry)
Stereo tracks:
- meka guitar (wet)
- jova guitar (wet)
Connections before:
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_9
- system:capture_10 -> ardour:jova guitar (dry)/audio_in 1
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_10
- system:capture_9 -> ardour:meka guitar (wet)/audio_in 1
- system:capture_10 -> ardour:meka guitar (wet)/audio_in 2
- ardour:meka guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:meka guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
- system:capture_9 -> ardour:jova guitar (wet)/audio_in 1
- system:capture_10 -> ardour:jova guitar (wet)/audio_in 2
- ardour:jova guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:jova guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
Connections after:
- system:capture_3 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_4 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_10 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_11 -> ardour:meka guitar (dry)/audio_in 1
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_9
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_10
- ardour:meka guitar (dry)/audio_out 1 -> ardour:master/audio_in 1
- system:capture_9 -> ardour:jova guitar (dry)/audio_in 1
- system:capture_10 -> ardour:jova guitar (dry)/audio_in 1
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_9
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_10
- system:capture_5 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_6 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_6 -> ardour:meka guitar (dry)/audio_in 2
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_10 -> ardour:meka guitar (dry)/audio_in 2
- ardour:jova guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:jova guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
6:45 p.m.
On 01/12/2011 07:31 AM, Goran Mekić wrote:
On 01/12/11 04:17, Paul Davis wrote:
I think you may have made a few typos. e.g there's no "meka (wet)"
ports in the "connections after" list. Is that correct?
The suggestion made by allcoms to post the output of `lack_lsp -c` is
more reliable.
Anyway. Intuitively this _could_ be related to
- using brackets in the port-names
- having ardour's auto-connect ports option enabled.
but a quick test shows that both of these work just fine here.
I can't reproduce the problem you describe.
Since you're experiencing the problem with both ardour2 and 3:
Could it be that you have some JACK patchbay or session-manager running
that actually does make the connections?
It will help if you could post a complete walk-though how to reproduce
this problem, include version numbers of the tools and what linux
distribution you're using.
Maybe a long shot: but you could try to temporarily move away the
~/.ardour2 (or ~/.config/ardour3/) folder where ardour saves its state
and global config. Ardour will re-create those with default settings.
Another shot in the dark: JACK port names are ASCII. Are you running
this on a non-English or non-UFT8 locale?!
best,
robin
2011/1/11 Goran Mekić<meka(a)ns-linux.org>rg>:
I suspected it's not
ardour, but here it is, anyway.
I've tested ardour2 and ardour3. What
happens is that I save the
session
with one track, and when I close ardour and open it again, the track is
connected to more inputs and outputs then it was when I've hit save.
I use
jackdbus + M-Audio Delta 1010LT. Is there any other info I should give?
(1) wrong
mailing list (ardour-users would be more appropriate) (2) please provide a LOT more details about the
connections "before"
and "after"
OK, here's what I have (more tracks to show it's not
always the same,
but for the track with the same name, additional connections are always
the same) Mono tracks:
- meka guitar (dry)
- jova guitar (dry)
Stereo tracks:
- meka guitar (wet)
- jova guitar (wet)
Connections before:
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_9
- system:capture_10 -> ardour:jova guitar (dry)/audio_in 1
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_10
- system:capture_9 -> ardour:meka guitar (wet)/audio_in 1
- system:capture_10 -> ardour:meka guitar (wet)/audio_in 2
- ardour:meka guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:meka guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
- system:capture_9 -> ardour:jova guitar (wet)/audio_in 1
- system:capture_10 -> ardour:jova guitar (wet)/audio_in 2
- ardour:jova guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:jova guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
Connections after:
- system:capture_3 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_4 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_10 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_11 -> ardour:meka guitar (dry)/audio_in 1
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_9
- ardour:meka guitar (dry)/audio_out 1 -> system:playback_10
- ardour:meka guitar (dry)/audio_out 1 -> ardour:master/audio_in 1
- system:capture_9 -> ardour:jova guitar (dry)/audio_in 1
- system:capture_10 -> ardour:jova guitar (dry)/audio_in 1
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_9
- ardour:jova guitar (dry)/audio_out 1 -> system:playback_10
- system:capture_5 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_6 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_6 -> ardour:meka guitar (dry)/audio_in 2
- system:capture_9 -> ardour:meka guitar (dry)/audio_in 1
- system:capture_10 -> ardour:meka guitar (dry)/audio_in 2
- ardour:jova guitar (wet)/audio_out 1 -> ardour:master/audio_in 1
- ardour:jova guitar (wet)/audio_out 2 -> ardour:master/audio_in 2
13 Jan
13 Jan
9:28 a.m.
On 01/12/11 19:45, Robin Gareus wrote:
On 01/12/2011 07:31 AM, Goran Mekić wrote:
I thought it has nothing to do with
it, but once I've killed
ladishd and ladishconf it works like a charm. Thanx a lot!
On 01/12/11 04:17, Paul Davis wrote:
I think you may have made a few typos. e.g there's no "meka
(wet)"
ports in the "connections after" list. Is that correct?
The suggestion made by allcoms to post the output of `lack_lsp -c` is
more reliable.
Anyway. Intuitively this _could_ be related to
- using brackets in the port-names
- having ardour's auto-connect ports option enabled.
but a quick test shows that both of these work just fine here.
I can't reproduce the problem you describe.
Since you're experiencing the problem with both ardour2 and 3:
Could it be that you have some JACK patchbay or session-manager running
that actually does make the connections? 2011/1/11 Goran Mekić<meka(a)ns-linux.org>rg>:
I suspected it's not
ardour, but here it is, anyway.
I've tested ardour2 and ardour3. What
happens is that I save the
session
with one track, and when I close ardour and open it again, the track is
connected to more inputs and outputs then it was when I've hit save.
I use
jackdbus + M-Audio Delta 1010LT. Is there any other info I should give?
(1) wrong
mailing list (ardour-users would be more appropriate) (2) please provide a LOT more details about the
connections "before"
and "after"
OK, here's what I have (more tracks to show it's not
always the same,
but for the track with the same name, additional connections are always
the same)
5215
days inactive
5216
days old
linux-audio-user@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
allcoms -
Goran Mekić -
Paul Davis -
Robin Gareus