14 Jul
2013
14 Jul
'13
9:40 p.m.
Hello everyone!
this is perghaps not straight on topic, but I couldn't find a satisfactory
answer anywhere else.
I'm having trouble with my JV-1080. Only every second note gets played. I
checked different input devices and different cables, direct and indirect
connections.
It seems to be a problem of the Roland itself. Internal sounds, demos and
the preview button, work fine. Any idea, what this might be? It looks so
systematic, as if it might be by design, but I don't know any feature, which
should allow for that.
Sorry to spam the list and thanks for following me so far.
Warm regards
Julien
----------------------------------------
http://juliencoder.de/nama/music.html
14 Jul
14 Jul
10:13 p.m.
On Sun, 2013-07-14 at 21:37 +0200, Julien Claassen wrote:
I'm having trouble with my JV-1080. Only every
second note gets
played.
What's the setup?
Is it simply master keyboard out to JV-1080 in?
IIUC it's always, exactly "every second" note. What happens, if you send
single controller steps and/or a single controller step and after that a
note etc.? I guess you're playing each note by the same MIDI channel?
Note off might vs Note on velocity 0 and/or a running status issue raise
it's ugly head, IOW if the setup includes some bad programmed stopover
between the master keyboard and the JV-1080, this program might
misinterpret the MIDI data.
You replaced the JV-1080 by another synth for the same setup?
To ensure that there isn't something broken close to the MIDI input's
opto-coupler, what happens, if you play a note and a second note 10
minutes later?
10:29 p.m.
Hello Ralf!
the problem is solved. didn't the mail reach the list or was it after yo
replied. Anyway: all is well. But I think you as well for trying to help.
Warm regards
Julien
----------------------------------------
http://juliencoder.de/nama/music.html
10:53 p.m.
If somebody should run into the same issue:
"At least I guess you could get 2 or more and use them in stack mode to
get stupidly high polyphony!!!" - http://www.dancecrave.com/jv1080.htm
11:34 p.m.
Am 14.07.2013 21:37, schrieb Julien Claassen:
Hello everyone!
this is perghaps not straight on topic, but I couldn't find a
satisfactory answer anywhere else.
I'm having trouble with my JV-1080. Only every second note gets
played. I checked different input devices and different cables, direct
and indirect connections.
It seems to be a problem of the Roland itself. Internal sounds,
demos and the preview button, work fine. Any idea, what this might be?
It looks so systematic, as if it might be by design, but I don't know
any feature, which should allow for that.
Sorry to spam the list and thanks for following me so far.
Warm regards
Julien
----------------------------------------
http://juliencoder.de/nama/music.html
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
Dear Julien, dear list,
Roland has introduced a feature in the JV-1080 called "stacking" so that
up to 8 JVs can share incoming MIDI notes.
Every JV-1080 can be told via the front panel how many modules share the
incoming events
and at which place in the chain it is ( for example the second JV out of
five or the forth JV out of eight).
Maybe You just turned that mode on accidentally
That means with 3 present Roland JV-1080 the coming MIDI events will be
played by following order
JV 01 plays Voice 01 ; JV 02 plays Voice 02 ; JV 03 plays Voice 03
JV 01 plays Voice 04 ; JV 02 plays Voice 05 ; JV 03 plays Voice 06
JV 01 plays Voice 07 ; JV 02 plays Voice 08 ; JV 03 plays Voice 09
and so forth.
You can change this mode back to OFF in Performance Mode, Patch Mode and
GM MIDI Mode.
This might be the same for the three modes, so here it is for the
Performance Mode
First You have to press SYSTEM key
You can now change the value of 3 settings:
1) Control Channel, usually your MIDI Control Channel of your choice
2) Clock Source, MIDI Tempo clock, either intern or via MIDI
3) Stack, Settings are Off, 1 of 2 up to 8 of 8
I did not find a good computer readable JV1080 pdf manual in German or
English online to advise you to the right page.
Unfortunately I don't know if a MIDI command exists to change that Stack
mode.
This would be the easiest way for you to send it from your computer.
I hope my answer was helpful.
Greetings and God bless,
Marius
15 Jul
15 Jul
4:55 a.m.
On 07/14/2013 03:37 PM, Julien Claassen wrote:
Hello everyone!
this is perghaps not straight on topic, but I couldn't find a
satisfactory answer anywhere else.
I'm having trouble with my JV-1080. Only every second note gets
played. I checked different input devices and different cables, direct
and indirect connections.
It seems to be a problem of the Roland itself. Internal sounds,
demos and the preview button, work fine. Any idea, what this might be?
It looks so systematic, as if it might be by design, but I don't know
any feature, which should allow for that.
Sorry to spam the list and thanks for following me so far.
Warm regards
Julien
IIRC, the JV1080 engine has, as one of it's many obscure features, one
which will alternate every other note event on each LR output. If you
are listening to only the left, for example, you would hear only every
other note
--
---
My bands, CD projects, music, news, and pictures:
http://www.lateralforce.com
My blog, with commentary on a variety of things, including audio,
mixing, equipment, etc, is at:
http://audioandmore.wordpress.com
Staat heißt das kälteste aller kalten Ungeheuer. Kalt lügt es auch;
und diese Lüge kriecht aus seinem Munde: 'Ich, der Staat, bin das Volk.'
- [Friedrich Nietzsche]
4100
days inactive
4101
days old
linux-audio-user@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
Al Thompson -
Julien Claassen -
Marius Janßen -
Ralf Mardorf