hello Julien. i just tried it, it works; though lash_control took a little getting-used to.. Did you specify the full path to the project when restoring it? here's a walkthu: 1) start jackd & lashd 2) launch jackctlmmc & connect it's midi-port 3) lanuch lash_control and run 'list' or just press /enter/. With lash_control-0.5.1 this first '/enter/ replaced the command-prompt with a lash-project name. 'list' also displays the path where the project will be saved. 4) still in lash_control: 'list', 'save', 'close' and jackctlmmc exits. 5) optional: restart lash_control, or jackd&lashd or your machine.. 6) I needed to specified the full path to the project to restore. the project itself is a folder (not a file) and the default is $HOME/audio-projects/<project-name> - in my case: 'restore /home/rgareus/audio-projects/project-11' - and jackctl was back in action. - i still needed to run 'list' in order for lash_control to update it's prompt.. HTH, robin Julien Claassen wrote:

On Sun, 2007-07-08 at 02:18 +0200, Julien Claassen wrote: 1) Start lash_control, lash_panel, glashctl or any other LASH control interface. If you have an old version of LASH you may have to start lashd manually before this, but with recent versions it is not needed. 2) Restore the session ('restore <session dir>' in lash_control, "File" -> "Open project" and select the session dir in lash_panel, "Restore session" and select the session dir in glashctl). This should restart all the programs in the session with the same connections and data. If it doesn't, something is wrong. --ll