15 Sep
2013
15 Sep
'13
2:49 a.m.
I know this would be like finding a needle in a heystack, but, here goes.
I just recorded an audio track in to ecasound via nama.
Here's the input chain.
Wide diafram condensor mic > Art Tube pack with compressor bipassed >
line 3 of Delta 1010LT > DAW.
There was no processing on the input chanel of the daw.
But, while I was recording an energetic vocal/guitar track, the level
of monitoring output on the mic only dropped about 15-20 db in my
monitoring headphones. The click stayed at normal volume.
Any thoughts at all?
It's pretty hot here in the studio, could the heat be effecting things at all?
CRAZY and mistifyed.
Rusty
17 Sep
17 Sep
4:15 p.m.
On 9/14/13, Rusty Perez <rustys.lists(a)gmail.com> wrote:
Wide diafram condensor mic > Art Tube pack with
compressor bipassed >
line 3 of Delta 1010LT > DAW.
There was no processing on the input chanel of the daw.
But, while I was recording an energetic vocal/guitar track, the level
of monitoring output on the mic only dropped about 15-20 db in my
monitoring headphones. The click stayed at normal volume.
Any thoughts at all?
Hi Rusty, I have had a similar problem with the Delta, and as far as
I remember the problem was a faulty connection. Whether it was
corrosion on the Delta input socket, or dirt, or both I don't know,
but after wroking the plug in the socket a bit, the problem seems to
have gone away for me.
Hope that helps.
4138
days inactive
4140
days old
linux-audio-user@lists.linuxaudio.org
1 comments
2 participants
participants (2)
-
Egor Sanin -
Rusty Perez