On ven, 2004-08-13 at 10:27 +0200, Frank Barknecht wrote:
Hallo,
Arnault Teissier hat gesagt: // Arnault Teissier wrote:
On jeu, 2004-08-12 at 22:51 -0700, Thomas Hauth
wrote:
> for his laptop and he has got serious latency problems ( >200ms) on
> windows using Cubase. This external "card" uses USB which seems to be a
> bit too slow for this kind of application.
This is not so generally. I get quite okay latencies with my cheap USB
card (jack -p 128 or -p 256 works fine)
I heard some other bad latency experience with
usb hardware. But mybe
that there are some better card that sb extigy. I just look for people
who could advise me ;)
And what about PCMCIA sound card? i heard that there is a RME one, but i
think it's very expensive? And what about it's support with ALSA?
RME is very expensive. For supported USB cards look at
http://www.qbik.ch/usb/devices/ Generally spoken: stay clear of
M-Audio USB ware like the Quattro, try to use a slighty older device,
so it has already been tested by some people.
Thanx a lot for this link!! I never find it! many good information!! And
it's true that RME is expensive, it's why i could be interested in a
cheaper one. But if only this one is working to have good performance, i
will keep my money during next months ;)
I use a USB card with Pd on my laptop and I'm
quite happy with it.
Which one is it exactly? What latency do you have with your MIDI input
and output? because i would not have some bad experience, so if you tell
me, yours is working fine, i will look for the same. I heard so much bad
story about USB sound card with linux...
regards
--
Arnault Teissier <roswel(a)assonetworx.com>
Association Networx