[linux-audio-user] How to enable 88.1KHz and above sampling rate on HDSP/Multiface+Jack?
9 Nov
2004
9 Nov
'04
3:07 p.m.
Hi all,
I guess the title says it all. I was wondering if there was a button or
something that would enable this using perhaps a hdspmixer or something
similar or perhaps passing appropriate setting via alsa mixer?
On my setup jack always fails with anything above 48KHz.
Best wishes,
Ivica Ico Bukvic, composer & multimedia sculptor
http://meowing.ccm.uc.edu/~ico/
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004
9 Nov
9 Nov
3:15 p.m.
New subject: [linux-audio-user] How to enable 88.1KHz and above sampling rate on HDSP/Multiface+Jack?
For the HDSP 9652 you can switch to 88.2/96KHz operation using
hdspconf. After hdspconf has made the switch you can then run Jack at
those frequencies.
On Tue, 9 Nov 2004 14:07:36 -0500, Ivica Ico Bukvic <ico(a)fuse.net> wrote:
Hi all,
I guess the title says it all. I was wondering if there was a button or
something that would enable this using perhaps a hdspmixer or something
similar or perhaps passing appropriate setting via alsa mixer?
On my setup jack always fails with anything above 48KHz.
Best wishes,
Ivica Ico Bukvic, composer & multimedia sculptor
http://meowing.ccm.uc.edu/~ico/
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004
4:12 p.m.
New subject: [linux-audio-user] How to enable 88.1KHz and above sampling rateon HDSP/Multiface+Jack?
Thank you very much for the info!
Best wishes,
Ivica Ico Bukvic, composer & multimedia sculptor
http://meowing.ccm.uc.edu/~ico/
-----Original Message-----
From: linux-audio-user-bounces(a)music.columbia.edu [mailto:linux-audio-
user-bounces(a)music.columbia.edu] On Behalf Of Mark Knecht
Sent: Tuesday, November 09, 2004 2:15 PM
To: A list for linux audio users
Subject: Re: [linux-audio-user] How to enable 88.1KHz and above sampling
rateon HDSP/Multiface+Jack?
For the HDSP 9652 you can switch to 88.2/96KHz operation using
hdspconf. After hdspconf has made the switch you can then run Jack at
those frequencies.
On Tue, 9 Nov 2004 14:07:36 -0500, Ivica Ico Bukvic <ico(a)fuse.net> wrote:
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004
Hi all,
I guess the title says it all. I was wondering if there was a button or
something that would enable this using perhaps a hdspmixer or something
similar or perhaps passing appropriate setting via alsa mixer?
On my setup jack always fails with anything above 48KHz.
Best wishes,
Ivica Ico Bukvic, composer & multimedia sculptor
http://meowing.ccm.uc.edu/~ico/
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004
---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004
6:28 p.m.
New subject: [linux-audio-user] How to enable 88.1KHz and above sampling rate on HDSP/Multiface+Jack?
Hi there,
Hopefully this helps (from my site
http://danharper.org/Linux_on_the_IBM_ThinkPad_R50.html):
Thomas Charbonnel has tipped me off to a way to enable
96kHz on the
RME HDSP, I haven't tested it yet, but I know Thomas is very
knowledgeable on HDSP issues:
Hi Dan,
I read on your page you had problems using the hdsp at 96kHz. To do
so you have to switch to double speed mode (i.e. to a sample
rate > 48khz) manually before opening the desired app. You can do
this either graphically with hdspconf (part of alsa-tools) or on the
command line
using amixer :
amixer -c X cset numid=11 Y
where X is your hdsp's alsa card number and Y the rate needed
(6 is 96kHz).
Thomas
Dan
On Tue, 2004-11-09 at 14:07 -0500, Ivica Ico Bukvic wrote:
Hi all,
I guess the title says it all. I was wondering if there was a button or
something that would enable this using perhaps a hdspmixer or something
similar or perhaps passing appropriate setting via alsa mixer?
On my setup jack always fails with anything above 48KHz.
Best wishes,
Ivica Ico Bukvic, composer & multimedia sculptor
http://meowing.ccm.uc.edu/~ico/
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004
--
Dan Harper
http://danharper.org
7348
days inactive
7348
days old
linux-audio-user@lists.linuxaudio.org
3 comments
3 participants
participants (3)
-
Dan Harper -
Ivica Ico Bukvic -
Mark Knecht