23 Jan
2006
23 Jan
'06
6:30 a.m.
Hi!
This question is to all, who have installed their ZynAddSubFX and libfftw
from source. How do I have to configure fftw3, so zynaddsubfx works with it
and compiles ok? I can't manage it, and with my current fftw2 the sounds
sometimes get very awkward.
Thanks for any help!
Kindest regards
Julien
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net - the Linux TextBased Studio guide
23 Jan
23 Jan
11:38 a.m.
hi!
Alle 11:30, lunedì 23 gennaio 2006, Julien Claassen ha scritto:
Hi!
This question is to all, who have installed their ZynAddSubFX and libfftw
from source. How do I have to configure fftw3, so zynaddsubfx works with it
and compiles ok? I can't manage it, and with my current fftw2 the sounds
sometimes get very awkward.
I've done it compiling fftw3 - not 2 - with the following flags: --prefix=/usr
so that it's "easier" for the various configure scripts to find the .pc.
In the Readme it says fftw2 is needed, but here Zyn runs ok with fftw3, and
indeed in the Makefile you can find the definition for fftw3.
Byez!
Carotinho
___________________________________
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it
2:33 p.m.
In Jan 23 A.D. 2006 Carotinho scripsit:
hi!
Alle 11:30, lunedì 23 gennaio 2006, Julien Claassen ha scritto:
I knew this bit about
Zyn working with fftw3, it says so in the makefile, but
I simply couldn't get it to work properly. Perhaps I'll try leaving all other
options for float and so on aside, as you did.
Kindest regards
Julien
Hi!
This question is to all, who have installed their ZynAddSubFX and libfftw
from source. How do I have to configure fftw3, so zynaddsubfx works with it
and compiles ok? I can't manage it, and with my current fftw2 the sounds
sometimes get very awkward.
I've done it compiling fftw3 - not 2 - with the following flags: --prefix=/usr
so that it's "easier" for the various configure scripts to find the .pc.
In the Readme it says fftw2 is needed, but here Zyn runs ok with fftw3, and
indeed in the Makefile you can find the definition for fftw3. Byez!
Carotinho
___________________________________
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it
--------
Music was my first love and it will be my last (John Miles)
======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net - the Linux TextBased Studio guide
5:24 p.m.
Hi!
Alle 19:33, lunedì 23 gennaio 2006, Julien Claassen ha scritto:
I knew this bit about Zyn working with fftw3, it says
so in the makefile,
but I simply couldn't get it to work properly. Perhaps I'll try leaving all
other options for float and so on aside, as you did.
Yes, Zyn doesn't like the --enable-float option. I compiled fft23
--enable-float for some LADSPA, and then again without for Zyn.
Byez
Carotinho
___________________________________
Yahoo! Mail: gratis 1GB per i messaggi e allegati da 10MB
http://mail.yahoo.it
6927
days inactive
6927
days old
linux-audio-user@lists.linuxaudio.org
3 comments
2 participants
participants (2)
-
Carotinho -
Julien Claassen