19 Feb
2009
19 Feb
'09
3:58 p.m.
I know it's been asked before...
Is there any real open-source pitch correction software for use with Jack? I
use Ardour, and find that I could really benefit from something like this,
for my vocals...
I know some of you don't like pitch correction, but sometimes it's very
helpful. Any suggestions? Maybe a way to use GSnap with Ardour?
Thanks!
--
Christopher Stamper
Email: christopherstamper(a)gmail.com
Web: http://tinyurl.com/2ooncg
gTalk: http://tinyurl.com/6e359r
Skype: cdstamper
19 Feb
19 Feb
4:28 p.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Christopher Stamper schrieb:
I know it's been asked before...
Is there any real open-source pitch correction software for use with Jack? I
use Ardour,
If the glitches are not too extreme, you can do it with LADSPA
am-pitchshifter. Insert it in the given track, open the automation-menu
(the tiny "a" in the trackhead) and choose Plugins/Pitch Shift. Then
draw a automation-line as needed in the auto-track - you need to set the
Mode from "manual" to "Play", to hear the results.
Good luck ;-)
Find the places that you want to correct,
and find that I could really benefit from something like this,
for my vocals...
I know some of you don't like pitch correction, but sometimes it's very
helpful.
It is always better to push it to the best one can do without digital
assistance. In the end I would prefer a untainted vocal recording with
some slight uncertainties in pitch ....
best regs
HZN
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iEYEARECAAYFAkmdwN8ACgkQ1Aecwva1SWNFvwCfY0aWkN7c+FS5/p5ZkUR2PmQA
eXsAn2w56h903Q9UhtyNw+DucBQ0XutR
=9IF3
-----END PGP SIGNATURE-----
4:45 p.m.
On Thu, Feb 19, 2009 at 3:28 PM, Hartmut Noack <zettberlin(a)linuxuse.de>wrote;wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Christopher Stamper schrieb:
Last time I tried, the pitch-shifter just destroyed the vocal. I'll try
again, and hope for the best...
I know it's been asked before...
Is there any real open-source pitch correction software for use with
Jack? I
use Ardour,
If the glitches are not too extreme, you can do it with LADSPA
am-pitchshifter. Insert it in the given track, open the automation-menu
(the tiny "a" in the trackhead) and choose Plugins/Pitch Shift. Then
draw a automation-line as needed in the auto-track - you need to set the
Mode from "manual" to "Play", to hear the results.
Good luck ;-)
Find the places that you want to correct,
and find that I could really benefit from something like this,
So do I. Problem is, I'm not as perfect-pitch as I'd like to think... ;-)
Thanks!
--
Christopher Stamper
Email: christopherstamper(a)gmail.com
Web: http://tinyurl.com/2ooncg
gTalk: http://tinyurl.com/6e359r
Skype: cdstamper
for my vocals...
I know some of you don't like pitch correction, but sometimes it's very
helpful.
It is always better to push it to the best one can do without digital
assistance. In the end I would prefer a untainted vocal recording with
some slight uncertainties in pitch .... 
20 Feb
20 Feb
3:56 a.m.
Is there any real open-source pitch correction
software for use with Jack?
I use Ardour, and find that I could really benefit from something like
this, for my vocals...
If you are interested in an offline tool to correct your singers, based on
their actual pitches and with respect to a reference frequency grid, I have
developed a Qt4 GUI over Praat that allows exactly this:
http://stephane.magnenat.net/data/fys-0.1.tar.gz
This program is currently alpha and limited, but it would allow you to edit
the pitch of a singer track. You need a working installation of Praat to make
it work.
Maybe it is useful to you. Have a nice day, best regards,
Stéphane
--
http://stephane.magnenat.net
4:12 a.m.
Christopher Stamper skrev:
On Thu, Feb 19, 2009 at 3:28 PM, Hartmut Noack <zettberlin(a)linuxuse.de
<mailto:zettberlin@linuxuse.de>> wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Christopher Stamper schrieb:
I know you specifically
asked about open source, but in case free as in
beer is ok there are a few vst plugins that seem to work under fst here:
http://freemusicsoftware.org/category/free-vst-effects-2/pitch-correction
Best regards
Ketil
I know it's been asked before...
Is there any real open-source pitch correction software for use
with Jack? I
use Ardour,
4:48 p.m.
On Fri, Feb 20, 2009 at 3:12 AM, Ketil Thorgersen <linuxuadio(a)rytmisk.net>wrote;wrote:
Christopher Stamper skrev:
Hey, as long as it's free... ;-)
Sorry for my ignorance, but does VST or LST work with Ardour?
Thanks everyone!
--
Christopher Stamper
Email: christopherstamper(a)gmail.com
Web: http://tinyurl.com/2ooncg
gTalk: http://tinyurl.com/6e359r
Skype: cdstamper
On Thu, Feb 19, 2009 at 3:28 PM, Hartmut Noack <zettberlin(a)linuxuse.de
<mailto:zettberlin@linuxuse.de>> wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Christopher Stamper schrieb:
I know you specifically
asked about open source, but in case free as in
beer is ok there are a few vst plugins that seem to work under fst here:
http://freemusicsoftware.org/category/free-vst-effects-2/pitch-correction
I know it's been asked before...
Is there any real open-source pitch correction software for use
with Jack? I
use Ardour,
21 Feb
21 Feb
4:37 a.m.
I easily compiled the new http://www.joebutton.co.uk/fst/ (which does
not require any steinberg headers btw) as user and run it as a jack
client with qjackctl. fst does not work from within ardour though, but
ardour can be compiled with its own vst support if I am not mistaken.
Best regards
Ketil
Christopher Stamper skrev:
On Fri, Feb 20, 2009 at 3:12 AM, Ketil Thorgersen
<linuxuadio(a)rytmisk.net <mailto:linuxuadio@rytmisk.net>> wrote:
Christopher Stamper skrev:
On Thu, Feb 19, 2009 at 3:28 PM, Hartmut Noack
<zettberlin(a)linuxuse.de
<mailto:zettberlin@linuxuse.de>
<mailto:zettberlin@linuxuse.de
<mailto:zettberlin@linuxuse.de>>>
wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Christopher Stamper schrieb:
> I know it's been asked before...
>
> Is there any real open-source pitch correction software
for use
with Jack? I
I know you
specifically asked about open source, but in case free
as in
beer is ok there are a few vst plugins that seem to work under fst
here:
http://freemusicsoftware.org/category/free-vst-effects-2/pitch-correction
Hey, as long as it's free... ;-)
Sorry for my ignorance, but does VST or LST work with Ardour?
Thanks everyone!
--
Christopher Stamper
Email: christopherstamper(a)gmail.com <mailto:christopherstamper@gmail.com>
Web: http://tinyurl.com/2ooncg
gTalk: http://tinyurl.com/6e359r
Skype: cdstamper use Ardour,
27 Feb
27 Feb
6:25 p.m.
On Sat, Feb 21, 2009 at 3:37 AM, Ketil Thorgersen <linuxuadio(a)rytmisk.net>wrote;wrote:
I easily compiled the new
http://www.joebutton.co.uk/fst/ (which does
not require any steinberg headers btw) as user and run it as a jack
client with qjackctl. fst does not work from within ardour though, but
ardour can be compiled with its own vst support if I am not mistaken.
Ardour 2.0-ongoing (SVN) has support for VST using the same codebase as
current FST, and Ardour 3.0 (SVN) is getting it added today.
Ardour 2.8 will be released next week (not sure what day) with this "new
feature".
--p
5683
days inactive
5691
days old
linux-audio-user@lists.linuxaudio.org
7 comments
5 participants
participants (5)
-
Christopher Stamper -
Hartmut Noack -
Ketil Thorgersen -
Paul Davis -
Stéphane Magnenat