On Sun, 28 Dec 2008 05:34:48 +0100 Dragan Noveski <perodog(a)gmx.net> wrote: Hi I use libtool 2.2.6a-1 that comes with debian experimental, maybe you can install this version, hope .that does not have many dependencies. Or maybe I need to include the libtool file in the cvs tree, I really don't know ... Josep -- Josep Andreu <holborn(a)telefonica.net>

On Sun, 28 Dec 2008 11:59:13 +0100 Grammostola Rosea <rosea.grammostola(a)gmail.com> wrote: First: because I don't know nothing about LV2. Second: because all the programs that I use accepts LADSPA plugins. Third: I'm slow. I try to go step by step ..... be patience. Josep -- Josep Andreu <holborn(a)telefonica.net>

On Sun, 28 Dec 2008 18:01:01 +0000 Rui Nuno Capela <rncbc(a)rncbc.org> wrote: Many thanks .... :-) -- Josep Andreu <holborn(a)telefonica.net>

Jaromír Mikeš wrote: Hi, do you have autoconf and automake installed? (and perhaps autotools-dev too, dunno) Tapani

< < Jaromír Mikeš wrote: < < > Hello, < < > < < > I would like to try you new plugins, but geting some error during building < < ... < < > < < > /holap/exciter# ./autogen.sh < < > Generating build scripts, this might take a while. < < > aclocal./autogen.sh: line 30: aclocal: command not found < < > autoheader./autogen.sh: line 30: autoheader: command not found < < > autoconf./autogen.sh: line 30: autoconf: command not found < < > automake./autogen.sh: line 30: automake: command not found < < > < < > Some missing dependencies? < < > < < > Thanks for help. < < > < < > mira < < > < < < < Hi, do you have autoconf and automake installed? (and perhaps < < autotools-dev too, dunno) < < < < Tapani < < < < Yes that was the problem... thanks < < But now when running "make install" I'm geting list of errors... :-( < < exciter_ui.h:5:19: error: FL/Fl.H: No such file or directory < exciter_ui.h:11:32: error: FL/Fl_Shared_Image.H: No such file or directory < exciter_ui.h:12:32: error: FL/Fl_Value_Slider.H: No such file or directory < exciter_ui.h:13:28: error: FL/Fl_Valuator.H: No such file or directory < exciter_ui.h:14:24: error: FL/Fl_Dial.H: No such file or directory < exciter_ui.h:15:23: error: FL/Fl_Box.H: No such file or directory < exciter_ui.h:16:24: error: FL/fl_draw.H: No such file or directory < exciter_ui.h:17:32: error: FL/Fl_File_Chooser.H: No such file or directory < exciter_ui.h:18:23: error: FL/fl_ask.H: No such file or directory < exciter_ui.h:19:18: error: FL/x.H: No such file or directory < exciter_ui.h:39:33: error: FL/Fl_Double_Window.H: No such file or directory < In file included from main_ui.h:30, < from main_ui.cpp:31: < exciter_ui.h:21: error: expected class-name before ‘{’ token < exciter_ui.h:24: error: ISO C++ forbids declaration of ‘Fl_Shared_Image’ with no < type < exciter_ui.h:24: error: expected ‘;’ before ‘*’ token < exciter_ui.h:25: error: ISO C++ forbids declaration of ‘Fl_Image’ with no type < exciter_ui.h:25: error: expected ‘;’ before ‘*’ token < exciter_ui.h:32: error: expected class-name before ‘{’ token < exciter_ui.h:60: error: ISO C++ forbids declaration of ‘Fl_Double_Window’ with < no type < exciter_ui.h:60: error: expected ‘;’ before ‘*’ token < exciter_ui.h:61: error: ISO C++ forbids declaration of ‘Fl_Double_Window’ with < no type < exciter_ui.h:61: error: expected ‘;’ before ‘*’ token < exciter_ui.h:63: error: ‘Fl_Double_Window’ has not been declared < exciter_ui.h:64: error: ‘Fl_Double_Window’ has not been declared < exciter_ui.h:66: error: ISO C++ forbids declaration of ‘Fl_Box’ with no type < exciter_ui.h:66: error: expected ‘;’ before ‘*’ token < exciter_ui.h:67: error: ISO C++ forbids declaration of ‘Fl_Box’ with no type < exciter_ui.h:67: error: expected ‘;’ before ‘*’ token < exciter_ui.h:138: error: ISO C++ forbids declaration of ‘Fl_Box’ with no type < exciter_ui.h:138: error: expected ‘;’ before ‘*’ token < main_ui.cpp: In function ‘void* thread1(void*)’: < main_ui.cpp:42: error: ‘Fl’ has not been declared < main_ui.cpp:47: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:50: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:58: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:64: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:70: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:76: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:81: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:86: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:91: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:96: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:101: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:106: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:111: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:116: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:121: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:126: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp: In function ‘void update_widgets(int, float)’: < main_ui.cpp:146: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:149: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:152: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:155: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:158: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:161: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:164: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:167: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:170: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:173: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:176: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:179: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:182: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:185: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp: In function ‘int configure_handler(const char*, const char*, < lo_arg**, int, void*, void*)’: < main_ui.cpp:247: error: ‘class holharm_ui’ has no member named ‘ShowChord’ < main_ui.cpp: In function ‘int quit_handler(const char*, const char*, lo_arg**, < int, void*, void*)’: < main_ui.cpp:276: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp: In function ‘int exiting_handler(const char*, const char*, < lo_arg**, int, void*, void*)’: < main_ui.cpp:288: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp: In function ‘int main(int, char**)’: < main_ui.cpp:373: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:374: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:408: error: ‘class holharm_ui’ has no member named ‘d_osc_label’ < make[2]: *** [exciter_fltk-main_ui.o] Error 1 < make[2]: Leaving directory `/home/mira/holap/exciter/src' < make[1]: *** [all-recursive] Error 1 < make[1]: Leaving directory `/home/mira/holap/exciter' < make: *** [all] Error 2 < 64studio:/home/mira/holap/exciter# make install < Making install in src < make[1]: Entering directory `/home/mira/holap/exciter/src' < g++ -DHAVE_CONFIG_H -I. -I.. "-I/usr/include/freetype2 -D_THREAD_SAFE < -D_REENTRANT" -g -O2 -MT exciter_fltk-main_ui.o -MD -MP -MF < .deps/exciter_fltk-main_ui.Tpo -c -o exciter_fltk-main_ui.o `test -f < 'main_ui.cpp' || echo './'`main_ui.cpp < In file included from main_ui.h:30, < from main_ui.cpp:31: < exciter_ui.h:5:19: error: FL/Fl.H: No such file or directory < exciter_ui.h:11:32: error: FL/Fl_Shared_Image.H: No such file or directory < exciter_ui.h:12:32: error: FL/Fl_Value_Slider.H: No such file or directory < exciter_ui.h:13:28: error: FL/Fl_Valuator.H: No such file or directory < exciter_ui.h:14:24: error: FL/Fl_Dial.H: No such file or directory < exciter_ui.h:15:23: error: FL/Fl_Box.H: No such file or directory < exciter_ui.h:16:24: error: FL/fl_draw.H: No such file or directory < exciter_ui.h:17:32: error: FL/Fl_File_Chooser.H: No such file or directory < exciter_ui.h:18:23: error: FL/fl_ask.H: No such file or directory < exciter_ui.h:19:18: error: FL/x.H: No such file or directory < exciter_ui.h:39:33: error: FL/Fl_Double_Window.H: No such file or directory < In file included from main_ui.h:30, < from main_ui.cpp:31: < exciter_ui.h:21: error: expected class-name before ‘{’ token < exciter_ui.h:24: error: ISO C++ forbids declaration of ‘Fl_Shared_Image’ with no < type < exciter_ui.h:24: error: expected ‘;’ before ‘*’ token < exciter_ui.h:25: error: ISO C++ forbids declaration of ‘Fl_Image’ with no type < exciter_ui.h:25: error: expected ‘;’ before ‘*’ token < exciter_ui.h:32: error: expected class-name before ‘{’ token < exciter_ui.h:60: error: ISO C++ forbids declaration of ‘Fl_Double_Window’ with < no type < exciter_ui.h:60: error: expected ‘;’ before ‘*’ token < exciter_ui.h:61: error: ISO C++ forbids declaration of ‘Fl_Double_Window’ with < no type < exciter_ui.h:61: error: expected ‘;’ before ‘*’ token < exciter_ui.h:63: error: ‘Fl_Double_Window’ has not been declared < exciter_ui.h:64: error: ‘Fl_Double_Window’ has not been declared < exciter_ui.h:66: error: ISO C++ forbids declaration of ‘Fl_Box’ with no type < exciter_ui.h:66: error: expected ‘;’ before ‘*’ token < exciter_ui.h:67: error: ISO C++ forbids declaration of ‘Fl_Box’ with no type < exciter_ui.h:67: error: expected ‘;’ before ‘*’ token < exciter_ui.h:138: error: ISO C++ forbids declaration of ‘Fl_Box’ with no type < exciter_ui.h:138: error: expected ‘;’ before ‘*’ token < main_ui.cpp: In function ‘void* thread1(void*)’: < main_ui.cpp:42: error: ‘Fl’ has not been declared < main_ui.cpp:47: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:50: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:58: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:64: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:70: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:76: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:81: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:86: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:91: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:96: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:101: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:106: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:111: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:116: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:121: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:126: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp: In function ‘void update_widgets(int, float)’: < main_ui.cpp:146: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:149: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:152: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp:155: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:158: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:161: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:164: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:167: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:170: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:173: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:176: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:179: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:182: error: ‘class SliderW’ has no member named ‘value’ < main_ui.cpp:185: error: ‘class Rueda’ has no member named ‘value’ < main_ui.cpp: In function ‘int configure_handler(const char*, const char*, < lo_arg**, int, void*, void*)’: < main_ui.cpp:247: error: ‘class holharm_ui’ has no member named ‘ShowChord’ < main_ui.cpp: In function ‘int quit_handler(const char*, const char*, lo_arg**, < int, void*, void*)’: < main_ui.cpp:276: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp: In function ‘int exiting_handler(const char*, const char*, < lo_arg**, int, void*, void*)’: < main_ui.cpp:288: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp: In function ‘int main(int, char**)’: < main_ui.cpp:373: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:374: error: ‘class holharm_ui’ has no member named ‘ui_win’ < main_ui.cpp:408: error: ‘class holharm_ui’ has no member named ‘d_osc_label’ < make[1]: *** [exciter_fltk-main_ui.o] Error 1 < make[1]: Leaving directory `/home/mira/holap/exciter/src' < make: *** [install-recursive] Error 1 Sorry no "make install" but make command ....

< On Thu, 08 Jan 2009 20:16:28 +0100 (CET) < Jaromír Mikeš &lt;mira.mikes(a)seznam.cz&gt; wrote: < < Seems you need to install libfltk1.1-dev, I dont know the name of this package < in your distro. < < Josep < Hello Josep Thanks a lot this working now ... :-) (on machine 1) Actually a have two machine with a little different installation and on second one I am getting this error: #./configure . . ./configure: line 17740: syntax error near unexpected token `MODULE,' ./configure: line 17740: `PKG_CHECK_MODULES(MODULE, dssi >= 0.4 liblo >= 0.12)' I've installed all available dssi and liblo packages including -devs ... but still the same. Cheers mira

< > ./configure: line 17740: syntax error near unexpected token `MODULE,' < > ./configure: line 17740: `PKG_CHECK_MODULES(MODULE, dssi >= 0.4 liblo >= < 0.12)' < > < > I've installed all available dssi and liblo packages including -devs ... but < still the same. < < Umhh ... check if both are available and versions are correct running: < < pkg-config --modversion liblo < pkg-config --modversion dssi mira@64studio:~$ pkg-config --modversion liblo 0.23 mira@64studio:~$ pkg-config --modversion dssi 0.9.1 It seems to be fine... < < If all is correct ... you can try removing the line `PKG_CHECK_MODULES(MODULE, < dssi >= 0.4 liblo >= 0.12)' < in configure.ac or configure.in ... and rerun autogen.sh ./configure .. etc. I've rerun ./autogen.sh ./configure make ... after removing line `PKG_CHECK_MODULES(MODULE, < dssi >= 0.4 liblo >= 0.12)' There was some errors after make: 64studio:/home/mira/holap/exciter# make cd . && /bin/bash /home/mira/holap/exciter/missing --run autoheader rm -f stamp-h1 touch config.h.in cd . && /bin/bash ./config.status config.h config.status: creating config.h config.status: config.h is unchanged make all-recursive make[1]: Entering directory `/home/mira/holap/exciter' Making all in src make[2]: Entering directory `/home/mira/holap/exciter/src' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT exciter.lo -MD -MP -MF .deps/exciter.Tpo -c -o exciter.lo exciter.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT exciter.lo -MD -MP -MF .deps/exciter.Tpo -c exciter.c -fPIC -DPIC -o .libs/exciter.o exciter.c: In function ‘osc_build_path’: exciter.c:169: warning: implicit declaration of function ‘strdup’ exciter.c:169: warning: incompatible implicit declaration of built-in function ‘strdup’ exciter.c: In function ‘exciterConfigure’: exciter.c:216: warning: implicit declaration of function ‘strcmp’ exciter.c:228: warning: incompatible implicit declaration of built-in function ‘strdup’ exciter.c:213: warning: unused variable ‘exciter’ exciter.c:212: warning: unused variable ‘i’ exciter.c: In function ‘exciter_get_program’: exciter.c:236: warning: unused variable ‘exciter’ exciter.c: In function ‘exciter_select_program’: exciter.c:255: warning: unused variable ‘exciter’ exciter.c: In function ‘activateexciter’: exciter.c:277: warning: unused variable ‘exciter’ exciter.c: In function ‘runexciter’: exciter.c:325: warning: implicit declaration of function ‘memset’ exciter.c:325: warning: incompatible implicit declaration of built-in function ‘memset’ exciter.c:304: warning: unused variable ‘dry’ libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT exciter.lo -MD -MP -MF .deps/exciter.Tpo -c exciter.c -o exciter.o >/dev/null 2>&1 mv -f .deps/exciter.Tpo .deps/exciter.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT recchord.lo -MD -MP -MF .deps/recchord.Tpo -c -o recchord.lo recchord.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT recchord.lo -MD -MP -MF .deps/recchord.Tpo -c recchord.c -fPIC -DPIC -o .libs/recchord.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT recchord.lo -MD -MP -MF .deps/recchord.Tpo -c recchord.c -o recchord.o >/dev/null 2>&1 mv -f .deps/recchord.Tpo .deps/recchord.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT analogfilter.lo -MD -MP -MF .deps/analogfilter.Tpo -c -o analogfilter.lo analogfilter.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT analogfilter.lo -MD -MP -MF .deps/analogfilter.Tpo -c analogfilter.c -fPIC -DPIC -o .libs/analogfilter.o libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT analogfilter.lo -MD -MP -MF .deps/analogfilter.Tpo -c analogfilter.c -o analogfilter.o >/dev/null 2>&1 mv -f .deps/analogfilter.Tpo .deps/analogfilter.Plo /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT harmonic.lo -MD -MP -MF .deps/harmonic.Tpo -c -o harmonic.lo harmonic.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT harmonic.lo -MD -MP -MF .deps/harmonic.Tpo -c harmonic.c -fPIC -DPIC -o .libs/harmonic.o harmonic.c: In function ‘calcula_mag’: harmonic.c:142: warning: implicit declaration of function ‘printf’ harmonic.c:142: warning: incompatible implicit declaration of built-in function ‘printf’ libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -MT harmonic.lo -MD -MP -MF .deps/harmonic.Tpo -c harmonic.c -o harmonic.o >/dev/null 2>&1 mv -f .deps/harmonic.Tpo .deps/harmonic.Plo /bin/bash ../libtool --tag=CC --mode=link gcc -Wall -pipe -msse -mfpmath=sse -ffast-math -O2 -Wall -ffunction-sections -fomit-frame-pointer -module -avoid-version -export-symbols-regex "(ladspa_|dssi_)descriptor" -o exciter.la -rpath /usr/local/lib/dssi exciter.lo recchord.lo analogfilter.lo harmonic.lo -lpthread -lm libtool: link: /usr/bin/nm -B .libs/exciter.o .libs/recchord.o .libs/analogfilter.o .libs/harmonic.o | sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' | /bin/sed 's/.* //' | sort | uniq > .libs/exciter.exp libtool: link: /bin/grep -E -e "(ladspa_|dssi_)descriptor" ".libs/exciter.exp" > ".libs/exciter.expT" libtool: link: mv -f ".libs/exciter.expT" ".libs/exciter.exp" libtool: link: echo "{ global:" > .libs/exciter.ver libtool: link: cat .libs/exciter.exp | sed -e "s/\(.*\)/\1;/" >> .libs/exciter.ver libtool: link: echo "local: *; };" >> .libs/exciter.ver libtool: link: gcc -shared .libs/exciter.o .libs/recchord.o .libs/analogfilter.o .libs/harmonic.o -lpthread -lm -msse -mfpmath=sse -Wl,-soname -Wl,exciter.so -Wl,-version-script -Wl,.libs/exciter.ver -o .libs/exciter.so libtool: link: ar cru .libs/exciter.a exciter.o recchord.o analogfilter.o harmonic.o libtool: link: ranlib .libs/exciter.a libtool: link: ( cd ".libs" && rm -f "exciter.la" && ln -s "../exciter.la" "exciter.la" ) g++ -DHAVE_CONFIG_H -I. -I.. "-I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT" -g -O2 -MT exciter_fltk-main_ui.o -MD -MP -MF .deps/exciter_fltk-main_ui.Tpo -c -o exciter_fltk-main_ui.o `test -f 'main_ui.cpp' || echo './'`main_ui.cpp mv -f .deps/exciter_fltk-main_ui.Tpo .deps/exciter_fltk-main_ui.Po g++ -DHAVE_CONFIG_H -I. -I.. "-I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT" -g -O2 -MT exciter_fltk-exciter_ui.o -MD -MP -MF .deps/exciter_fltk-exciter_ui.Tpo -c -o exciter_fltk-exciter_ui.o `test -f 'exciter_ui.cxx' || echo './'`exciter_ui.cxx mv -f .deps/exciter_fltk-exciter_ui.Tpo .deps/exciter_fltk-exciter_ui.Po /bin/bash ../libtool --tag=CXX --mode=link g++ "-I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT" -g -O2 -o exciter_fltk exciter_fltk-main_ui.o exciter_fltk-exciter_ui.o -lfltk -lfltk_images -lpthread -lpthread -lm libtool: link: g++ "-I/usr/include/freetype2 -D_THREAD_SAFE -D_REENTRANT" -g -O2 -o exciter_fltk exciter_fltk-main_ui.o exciter_fltk-exciter_ui.o -lfltk -lfltk_images -lpthread -lm exciter_fltk-main_ui.o: In function `main': /home/mira/holap/exciter/src/main_ui.cpp:364: undefined reference to `lo_url_get_hostname' /home/mira/holap/exciter/src/main_ui.cpp:365: undefined reference to `lo_url_get_port' /home/mira/holap/exciter/src/main_ui.cpp:366: undefined reference to `lo_url_get_path' /home/mira/holap/exciter/src/main_ui.cpp:377: undefined reference to `lo_address_new' /home/mira/holap/exciter/src/main_ui.cpp:389: undefined reference to `lo_server_new' /home/mira/holap/exciter/src/main_ui.cpp:392: undefined reference to `lo_server_add_method' /home/mira/holap/exciter/src/main_ui.cpp:394: undefined reference to `lo_server_add_method' /home/mira/holap/exciter/src/main_ui.cpp:395: undefined reference to `lo_server_add_method' /home/mira/holap/exciter/src/main_ui.cpp:397: undefined reference to `lo_server_add_method' /home/mira/holap/exciter/src/main_ui.cpp:398: undefined reference to `lo_server_add_method' exciter_fltk-main_ui.o:/home/mira/holap/exciter/src/main_ui.cpp:400: more undefined references to `lo_server_add_method' follow exciter_fltk-main_ui.o: In function `main': /home/mira/holap/exciter/src/main_ui.cpp:404: undefined reference to `lo_server_get_url' /home/mira/holap/exciter/src/main_ui.cpp:410: undefined reference to `lo_send_internal' /home/mira/holap/exciter/src/main_ui.cpp:412: undefined reference to `lo_send_internal' /home/mira/holap/exciter/src/main_ui.cpp:414: undefined reference to `lo_server_get_socket_fd' /home/mira/holap/exciter/src/main_ui.cpp:448: undefined reference to `lo_server_recv_noblock' /home/mira/holap/exciter/src/main_ui.cpp:487: undefined reference to `lo_server_recv_noblock' exciter_fltk-main_ui.o: In function `quit_handler(char const*, char const*, lo_arg**, int, void*, void*)': /home/mira/holap/exciter/src/main_ui.cpp:278: undefined reference to `lo_send_internal' exciter_fltk-main_ui.o: In function `debug_handler(char const*, char const*, lo_arg**, int, void*, void*)': /home/mira/holap/exciter/src/main_ui.cpp:229: undefined reference to `lo_arg_pp' exciter_fltk-main_ui.o: In function `thread1(void*)': /home/mira/holap/exciter/src/main_ui.cpp:126: undefined reference to `lo_send_internal' /home/mira/holap/exciter/src/main_ui.cpp:133: undefined reference to `lo_send_internal' /home/mira/holap/exciter/src/main_ui.cpp:116: undefined reference to `lo_send_internal' /home/mira/holap/exciter/src/main_ui.cpp:121: undefined reference to `lo_send_internal' /home/mira/holap/exciter/src/main_ui.cpp:111: undefined reference to `lo_send_internal' exciter_fltk-main_ui.o:/home/mira/holap/exciter/src/main_ui.cpp:106: more undefined references to `lo_send_internal' follow collect2: ld returned 1 exit status make[2]: *** [exciter_fltk] Error 1 make[2]: Leaving directory `/home/mira/holap/exciter/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/mira/holap/exciter' make: *** [all] Error 2 < < The question is .. this machine uses bash? < Sorry ... how can I check it? mira

< > < The question is .. this machine uses bash? < > < < > < > Sorry ... how can I check it? < > < < echo $SHELL < < should return < < /bin/bash < < or something similar. < < By the way, from your prompt (#) it looks like you're doing the < compilation as root, which isn't necessary. You needn't become root < until you're ready to "make install". < < Andras mira@64studio:~$ echo $SHELL /bin/bash Thank you Andras

< ummh ... Seems you dont have liblo-dev installed ... < I have it (liblo-dev) installed :-( I was discussing this issue on other mailing list and somebody very experienced was guessing that gcc can be problem. Gustin Johnson wrote: My next guess is that the problem is the version of gcc is causing grief. Ubuntu is pretty aggressive with the version of gcc that they ship, especially when compared to Debian stable. summary: I've succeed install on one machine with debian based distro I didn't succeed install on second machine with ubuntu based distro machine one gcc 4.1.2; 4.2.4; 4.3.2 and licgcc1 4.3.2 machine two gcc 4.1.2 and 4.2.4 and libgcc1 4.2.4 ## I'm just guessing ... maybe this is no right direction.. Do you have some report of succesful install of this bundle on ubuntu hardy? mira

On Sat, 10 Jan 2009 03:09:00 +0100 (CET) Jaromír Mikeš &lt;mira.mikes(a)seznam.cz&gt; wrote: I use gcc 4.3.3 .. I don't think that that's a gcc problem ... maybe the problem is in the autotools scripts ... I need to improve them. Josep -- Josep Andreu &lt;holborn(a)telefonica.net&gt;