23 Sep
2005
23 Sep
'05
10:19 a.m.
Slat 0.3 is now finished.
Windows size can be set with -s
Notes are linearly spaced (to prevent the headf**k)
Flat/sharp notes are darkened
http://blog.dis-dot-dat.net/2005/09/slat-03.html
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
23 Sep
23 Sep
11:39 a.m.
Hey that looks pretty spiffy. Unfortunately it won't compile with
clanlib 0.6.5 which is what's in Debian/Demudi stable/testing.
On Fri, 23 Sep 2005 at 13:25 +0100, james(a)dis-dot-dat.net wrote:
Slat 0.3 is now finished.
Windows size can be set with -s
Notes are linearly spaced (to prevent the headf**k)
Flat/sharp notes are darkened
http://blog.dis-dot-dat.net/2005/09/slat-03.html
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
--
Hans Fugal | If more of us valued food and cheer and
http://hans.fugal.net/ | song above hoarded gold, it would be a
http://gdmxml.fugal.net/ | merrier world.
| -- J.R.R. Tolkien
---------------------------------------------------------------------
GnuPG Fingerprint: 6940 87C5 6610 567F 1E95 CB5E FC98 E8CD E0AA D460
11:58 a.m.
On Fri, 23 Sep, 2005 at 07:39AM -0600, Hans Fugal spake thus:
Hey that looks pretty spiffy. Unfortunately it
won't compile with
clanlib 0.6.5 which is what's in Debian/Demudi stable/testing.
Have you tried changing the Makefile?
I doubt that I'm doing anything cutting-edge enough to realy need
clanlib 0.7, so you should be OK just changing the very first line.
In fact, most of the first line is not doing anything. It's left over
from the last place I copied and pasted from ;)
I haven't got around to writing any complicated build scripts yet -
I've only used automake/autoconf once and don't fancy the headache
again.
On Fri, 23 Sep 2005 at 13:25 +0100,
james(a)dis-dot-dat.net wrote:
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
Slat 0.3 is now finished.
Windows size can be set with -s
Notes are linearly spaced (to prevent the headf**k)
Flat/sharp notes are darkened
http://blog.dis-dot-dat.net/2005/09/slat-03.html
1:01 p.m.
On Fri, 23 Sep 2005 at 15:04 +0100, james(a)dis-dot-dat.net wrote:
On Fri, 23 Sep, 2005 at 07:39AM -0600, Hans Fugal
spake thus:
Yeah:
--- Makefile 2005-09-16 13:34:38.000000000 -0600
+++ Makefile.new 2005-09-23 08:57:52.000000000 -0600
@@ -1,9 +1,9 @@
-PACKAGES = clanCore-0.7 clanDisplay-0.7 clanApp-0.7 clanGL-0.7 clanVorbis-0.7
clanSound-0.7 jack
+PACKAGES = jack
#CPP = gcc -g -I/usr/include/ClanLib-0.7/ -Wall `pkg-config --cflags $(PACKAGES)`
CPP = gcc -g -Wall
#`pkg-config --cflags $(PACKAGES)`
-LIBS=`pkg-config --libs $(PACKAGES)`
-FLAGS=`pkg-config --cflags $(PACKAGES)`
+LIBS=`pkg-config --libs $(PACKAGES)` `clanlib-config --libs`
+FLAGS=`pkg-config --cflags $(PACKAGES)` `clanlib-config --cflags`
version=`./packagename`
slat: theremin.o jackPart.o cmdline.o
Hey that looks pretty spiffy. Unfortunately it
won't compile with
clanlib 0.6.5 which is what's in Debian/Demudi stable/testing.
Have you tried changing the Makefile? I doubt that I'm doing anything cutting-edge
enough to realy need
clanlib 0.7, so you should be OK just changing the very first line.
In fact, most of the first line is not doing anything. It's left over
from the last place I copied and pasted from ;)
See the attached error output. I think it looks like it can't find some
function definitions, and my guess is the API changed (or maybe with
0.6.5 we need different include files)
--
Hans Fugal | If more of us valued food and cheer and
http://hans.fugal.net/ | song above hoarded gold, it would be a
http://gdmxml.fugal.net/ | merrier world.
| -- J.R.R. Tolkien
---------------------------------------------------------------------
GnuPG Fingerprint: 6940 87C5 6610 567F 1E95 CB5E FC98 E8CD E0AA D460
1:21 p.m.
i've successfully compiled slat with clanlib 0.7 -- no error messages.
however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0: cannot
open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
1:36 p.m.
Peter Lutek wrote:
i've successfully compiled slat with clanlib 0.7
-- no error messages.
however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0:
cannot open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
replying to myself...... oy:
the clanlib stuff lives in /usr/local/lib and there IS a symlink
libclanApp-0.7.so.0 --> libclanApp-0.7.so.0.0.0
why does slat not see the lib?
1:42 p.m.
On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek spake thus:
i've successfully compiled slat with clanlib 0.7
-- no error messages.
however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0: cannot
open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
1:50 p.m.
james(a)dis-dot-dat.net wrote:
On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek
spake thus:
is /usr/local/lib a "sensible" place? i ran ldconfig and still have the
same issue.
i've successfully compiled slat with clanlib
0.7 -- no error messages.
however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0: cannot
open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
1:57 p.m.
james(a)dis-dot-dat.net wrote:
On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek
spake thus:
oops..... forgot to give the shared lib dir on the command line for
ldconfig..... DOH!
it's all good now.... time to go play!
thanks - for your help and for SLAT!
i've successfully compiled slat with clanlib
0.7 -- no error messages.
however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0: cannot
open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
2:07 p.m.
Peter Lutek wrote:
james(a)dis-dot-dat.net wrote:
any way to make it so you don't have to be in the dir where bg.png lives
when starting slat? if i'm not there, i get an error message complaining
that it couldn't open that file.
On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter
Lutek spake thus:
oops..... forgot to give the shared lib dir on the command line for
ldconfig..... DOH!
it's all good now.... time to go play!
thanks - for your help and for SLAT!
i've successfully compiled slat with clanlib
0.7 -- no error
messages. however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0:
cannot open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
2:47 p.m.
On Fri, 23 Sep, 2005 at 12:11PM -0400, Peter Lutek spake thus:
Peter Lutek wrote:
Yes, I need to do a proper install thing, but haven't got around to it
yet.
Give me a moment...
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
james(a)dis-dot-dat.net wrote:
any way to make it so you don't have to be in the dir where bg.png lives
when starting slat? if i'm not there, i get an error message complaining
that it couldn't open that file. On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek
spake thus:
oops..... forgot to give the shared lib dir on the command line for
ldconfig..... DOH!
it's all good now.... time to go play!
thanks - for your help and for SLAT!
i've successfully compiled slat with clanlib
0.7 -- no error
messages. however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0:
cannot open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
2:59 p.m.
On Fri, 23 Sep, 2005 at 12:11PM -0400, Peter Lutek spake thus:
Peter Lutek wrote:
Okay, for now change the install section of the makefile to:
install:
install -o root -m a+rx slat /usr/bin
mkdir -p /usr/share/slat
install -o root -m a+r bg.png /usr/share/slat
And in theremin.cpp, change line 150 to:
CL_Surface *bg = new CL_Surface("/usr/share/slat/bg.png");
And you should be all set. These changes will be in the next release.
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
james(a)dis-dot-dat.net wrote:
any way to make it so you don't have to be in the dir where bg.png lives
when starting slat? if i'm not there, i get an error message complaining
that it couldn't open that file. On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek
spake thus:
oops..... forgot to give the shared lib dir on the command line for
ldconfig..... DOH!
it's all good now.... time to go play!
thanks - for your help and for SLAT!
i've successfully compiled slat with clanlib
0.7 -- no error
messages. however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0:
cannot open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
3:11 p.m.
On Fri, 23 Sep, 2005 at 06:05PM +0100, James Shuttleworth spake thus:
On Fri, 23 Sep, 2005 at 12:11PM -0400, Peter Lutek
spake thus:
Forgot about mp.png. Add this on the end.
install -o root -m a+r mp.png /usr/share/slat
Peter Lutek wrote:
Okay, for now change the install section of the makefile to:
install:
install -o root -m a+rx slat /usr/bin
mkdir -p /usr/share/slat
install -o root -m a+r bg.png /usr/share/slat james(a)dis-dot-dat.net wrote:
any way to make it so you don't have to be in the dir where bg.png lives
when starting slat? if i'm not there, i get an error message complaining
that it couldn't open that file. On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek
spake thus:
>i've successfully compiled slat with clanlib 0.7 -- no error
>messages. however, when i try to run it, i receive:
>slat: error while loading shared libraries: libclanApp-0.7.so.0:
>cannot open shared object file: No such file or directory
>
>i'm on a planet ccrma fc3 machine. any ideas?
>
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
oops..... forgot to give the shared lib dir on the command line for
ldconfig..... DOH!
it's all good now.... time to go play!
thanks - for your help and for SLAT!
And in theremin.cpp, change line 150 to:
CL_Surface *bg = new CL_Surface("/usr/share/slat/bg.png");
And line 157 to:
mp = new CL_Surface("/usr/share/slat/mp.png");
And you should be all set. These changes will be in
the next release.
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
3:36 p.m.
james(a)dis-dot-dat.net wrote:
On Fri, 23 Sep, 2005 at 06:05PM +0100, James
Shuttleworth spake thus:
cool. thanks again!
i'll probably not get around to implementing that before next week....
and i'm running out of time to properly stress-test the addition of slat
in my live rig before tonight's gig. too bad.
looking forward to putting it through it's paces!
On Fri, 23 Sep, 2005 at 12:11PM -0400, Peter Lutek
spake thus:
Forgot about mp.png. Add this on the end.
install -o root -m a+r mp.png /usr/share/slat
Peter Lutek wrote:
Okay, for now change the install section of the makefile to:
install:
install -o root -m a+rx slat /usr/bin
mkdir -p /usr/share/slat
install -o root -m a+r bg.png /usr/share/slat
james(a)dis-dot-dat.net wrote:
>On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek spake thus:
>
>
>
>
>>i've successfully compiled slat with clanlib 0.7 -- no error
>>messages. however, when i try to run it, i receive:
>>slat: error while loading shared libraries: libclanApp-0.7.so.0:
>>cannot open shared object file: No such file or directory
>>
>>i'm on a planet ccrma fc3 machine. any ideas?
>>
>>
>>
>Have you tried "locate libclanApp" to see if you have the file?
>
>If you do, and it's in a sensible place, try running ldconfig.
>
>
>
>
>
>
oops..... forgot to give the shared lib dir on the command line for
ldconfig..... DOH!
it's all good now.... time to go play!
thanks - for your help and for SLAT!
any way to make it so you don't have to be in the dir where bg.png lives
when starting slat? if i'm not there, i get an error message complaining
that it couldn't open that file.
And in theremin.cpp, change line 150 to:
CL_Surface *bg = new CL_Surface("/usr/share/slat/bg.png");
And line 157 to:
mp = new CL_Surface("/usr/share/slat/mp.png");
>And you should be all set. These changes will be in the next release.
>
>
>
>
4:44 p.m.
On Fri, 23 Sep, 2005 at 01:40PM -0400, Peter Lutek spake thus:
james(a)dis-dot-dat.net wrote:
Live? Should be interesting. What kind of setup do you use? Do you
have any tracks anywhere?
You should try and get some video!
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
On Fri, 23 Sep, 2005 at 06:05PM +0100, James
Shuttleworth spake thus:
cool. thanks again!
i'll probably not get around to implementing that before next week....
and i'm running out of time to properly stress-test the addition of slat
in my live rig before tonight's gig. too bad.
looking forward to putting it through it's paces! On Fri, 23 Sep, 2005 at 12:11PM -0400, Peter Lutek
spake thus:
Forgot about mp.png. Add this on the end.
install -o root -m a+r mp.png /usr/share/slat
Peter Lutek wrote:
>james(a)dis-dot-dat.net wrote:
>
>
>
>>On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek spake thus:
>>
>>
>>
>>
>>>i've successfully compiled slat with clanlib 0.7 -- no error
>>>messages. however, when i try to run it, i receive:
>>>slat: error while loading shared libraries: libclanApp-0.7.so.0:
>>>cannot open shared object file: No such file or directory
>>>
>>>i'm on a planet ccrma fc3 machine. any ideas?
>>>
>>>
>>>
>>Have you tried "locate libclanApp" to see if you have the file?
>>
>>If you do, and it's in a sensible place, try running ldconfig.
>>
>>
>>
>>
>>
>>
>oops..... forgot to give the shared lib dir on the command line for
>ldconfig..... DOH!
>
>it's all good now.... time to go play!
>thanks - for your help and for SLAT!
>
>
>
any way to make it so you don't have to be in the dir where bg.png lives
when starting slat? if i'm not there, i get an error message complaining
that it couldn't open that file.
Okay, for now change the install section of the makefile to:
install:
install -o root -m a+rx slat /usr/bin
mkdir -p /usr/share/slat
install -o root -m a+r bg.png /usr/share/slat
And in theremin.cpp, change line 150 to:
CL_Surface *bg = new CL_Surface("/usr/share/slat/bg.png");
And line 157 to:
mp = new CL_Surface("/usr/share/slat/mp.png");
>And you should be all set. These changes will be in the next release.
>
>
>
>
2:46 p.m.
On Fri, 23 Sep, 2005 at 12:01PM -0400, Peter Lutek spake thus:
james(a)dis-dot-dat.net wrote:
No problem on both counts.
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
On Fri, 23 Sep, 2005 at 11:25AM -0400, Peter Lutek
spake thus:
oops..... forgot to give the shared lib dir on the command line for
ldconfig..... DOH!
it's all good now.... time to go play!
thanks - for your help and for SLAT! i've successfully compiled slat with clanlib
0.7 -- no error messages.
however, when i try to run it, i receive:
slat: error while loading shared libraries: libclanApp-0.7.so.0: cannot
open shared object file: No such file or directory
i'm on a planet ccrma fc3 machine. any ideas?
Have you tried "locate libclanApp" to see if you have the file?
If you do, and it's in a sensible place, try running ldconfig.
1:23 p.m.
On Fri, 23 Sep, 2005 at 09:00AM -0600, Hans Fugal spake thus:
On Fri, 23 Sep 2005 at 15:04 +0100,
james(a)dis-dot-dat.net wrote:
It got to me a little garbled, but I could read enough to spot which
functions were missing. Wow.
Looks like there were huge changes between 0.6.5 and 0.7.
Well, there are two options: install clanlib 0.7 (possibly locally) or
wait until I get around to writing an interface that doesn't require
clanlib.
I intend to get rid of the clanlib dependency anyway, because it's
hardly the best chouice for something so simple. Trouble is, I don't
have huge amounts of time.
Thanks for letting me know about this.
James
--
"I'd crawl over an acre of 'Visual This++' and 'Integrated
Development
That' to get to gcc, Emacs, and gdb. Thank you."
(By Vance Petree, Virginia Power)
On Fri, 23 Sep, 2005 at 07:39AM -0600, Hans Fugal
spake thus:
Yeah:
See the attached error output. I think it looks like it can't find some
function definitions, and my guess is the API changed (or maybe with
0.6.5 we need different include files) Hey that looks pretty spiffy. Unfortunately it
won't compile with
clanlib 0.6.5 which is what's in Debian/Demudi stable/testing.
Have you tried changing the Makefile?
7343
days inactive
7343
days old
linux-audio-user@lists.linuxaudio.org
16 comments
3 participants
participants (3)
-
Hans Fugal -
james＠dis-dot-dat.net -
Peter Lutek