13 Jul
2014
13 Jul
'14
7:13 p.m.
Hello,
What would be the best way to have the pads of an Axiom 25 trigger
Hydrogen only while the keyboard itself would trigger qsynth ? Qsynth
has sounds on all 16 MIDI channels and it seems that it's not possible
to disable reception for a specific channel channel. Nor turning the
sound down for a channel. Is this at all possible ?
I can see an app that would be in-between qsynth and the Axiom 25
MIDI input that would filter out MIDI input for a given channel, does
that exist ?
Also, in qjackctl there are two MIDI outputs for the Axiom 25. 0:USB
and 1:USB or MIDI 1 and MIDI 2. Conencting 0:USB to Hydrogen and USB:1
to qsynth could maybe be the way, but then the Axiom 25 would have to
be told to send pads to 0:USB and keys to 1:USB, which I'm not sure it
can do. The Axiom documentation has a lot of zones and groups and
such, but there's no section on how to actually achieve some results,
with examples, apart from very simple connection examples.
Any comments/suggestions appreciated !
Cheers.
13 Jul
13 Jul
7:37 p.m.
On Sun, 13 Jul 2014 13:13:17 -0400,
"jonetsu(a)teksavvy.com" <jonetsu(a)teksavvy.com> wrote :
Hydrogen only while the keyboard itself would trigger
qsynth ? Qsynth
has sounds on all 16 MIDI channels and it seems that it's not possible
to disable reception for a specific channel channel. Nor turning the
sound down for a channel. Is this at all possible ?
To quickly 'solve' this I closed qsynth and am using Zyn for a bass
sound. That allows the sending of the Axiom 25 pads to be as usual on
channel 10 for Hydrogen, with Zyn receiving nothing since not
configured for channel 10. So now I can play bass and drums at the
same time.
I wonder though, if it is at all possible to use Hydrogen and qsynth
without having qsynth playing note on whichever channel is chosen for
Hydrogen.
8:18 p.m.
On Sun, 13 Jul 2014 13:37:24 -0400 "jonetsu(a)teksavvy.com"
<jonetsu(a)teksavvy.com> wrote:
On Sun, 13 Jul 2014 13:13:17 -0400,
"jonetsu(a)teksavvy.com" <jonetsu(a)teksavvy.com> wrote :
There are midi-processors that can do the splitting from one input to
two (or more) outputs based on various rules. I just can't remember the
names right now.
Also I think the last time I used it, qsynth didn't necessarily listen
on all midi-channels. There might be options for that.
- Arnold
Hydrogen only while the keyboard itself would
trigger qsynth ?
Qsynth has sounds on all 16 MIDI channels and it seems that it's
not possible to disable reception for a specific channel channel.
Nor turning the sound down for a channel. Is this at all possible ?
To quickly 'solve' this I closed qsynth and am using Zyn for a bass
sound. That allows the sending of the Axiom 25 pads to be as usual on
channel 10 for Hydrogen, with Zyn receiving nothing since not
configured for channel 10. So now I can play bass and drums at the
same time.
I wonder though, if it is at all possible to use Hydrogen and qsynth
without having qsynth playing note on whichever channel is chosen for
Hydrogen. 
10:04 p.m.
New subject: Axiom 25: using pads with Hydrogen only (+ qsynth on keyboard)
On 07/13/2014 12:18 PM, Arnold Krille wrote:
On Sun, 13 Jul 2014 13:37:24 -0400
"jonetsu(a)teksavvy.com"
<jonetsu(a)teksavvy.com> wrote:
QMidiRoute allows you to route messages based on channel, among other
things (message type, note number, velocity)
On Sun, 13 Jul 2014 13:13:17 -0400,
"jonetsu(a)teksavvy.com" <jonetsu(a)teksavvy.com> wrote :
There are midi-processors that can do the splitting from one input to
two (or more) outputs based on various rules. I just can't remember the
names right now. Hydrogen only while the keyboard itself would
trigger qsynth ?
Qsynth has sounds on all 16 MIDI channels and it seems that it's
not possible to disable reception for a specific channel channel.
Nor turning the sound down for a channel. Is this at all possible ?
To quickly
'solve' this I closed qsynth and am using Zyn for a bass
sound. That allows the sending of the Axiom 25 pads to be as usual on
channel 10 for Hydrogen, with Zyn receiving nothing since not
configured for channel 10. So now I can play bass and drums at the
same time.
I wonder though, if it is at all possible to use Hydrogen and qsynth
without having qsynth playing note on whichever channel is chosen for
Hydrogen.
Also I think the last time I used it, qsynth didn't necessarily listen
on all midi-channels. There might be options for that.
Qsynth 0.3.6 here - it has a button "channels" that shows the channels
dialog, right-mouse -> "unset" will remove the instrument from a
selected channel
- Arnold
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
3860
days inactive
3860
days old
linux-audio-user@lists.linuxaudio.org
3 comments
3 participants
participants (3)
-
Arnold Krille -
jonetsu＠teksavvy.com -
Studio Channing