26 Sep
2010
26 Sep
'10
2:43 p.m.
Hi all,
has someone already tested fluidsynth-dssi since dssi was updated to 1.1.0 ?
I'm getting strongly distorted audio when using fluidsynth-dssi in any host (tested
with ghostess and qtractor) and suspect this to be related to that dssi update until
proven wrong. Strangely, all other dssi plugins including the updated ones from some days
ago work like a charm, as does fluidsynth played via qsynth.
I was wondering if I'm the only one with that problem?
Best
Frank
26 Sep
26 Sep
6:17 p.m.
New subject: fluidsynth-dssi with dssi 1.1.0 distorted/garbled audio output
On Sun, Sep 26, 2010 at 8:43 AM, Frank Kober wrote:
Hi all,
has someone already tested fluidsynth-dssi since dssi was updated to 1.1.0 ?
I'm getting strongly distorted audio when using fluidsynth-dssi in any host (tested
with ghostess and qtractor) and suspect this to be related to that dssi update until
proven wrong. Strangely, all other dssi plugins including the updated ones from some days
ago work like a charm, as does fluidsynth played via qsynth.
confirmed.
I was wondering if I'm the only one with that
problem?
nope. every dssi works fine but fluidsynth-dssi has the buzz.
I don't know yet what causes the issue.
Orcan
27 Sep
27 Sep
2:32 a.m.
New subject: fluidsynth-dssi with dssi 1.1.0 distorted/garbled audio output
On Sep 26, 2010, at 5:43 AM, Frank Kober wrote:
has someone already tested fluidsynth-dssi since dssi
was updated
to 1.1.0 ?
I'm getting strongly distorted audio when using fluidsynth-dssi in
any host (tested with ghostess and qtractor) and suspect this to be
related to that dssi update until proven wrong. Strangely, all
other dssi plugins including the updated ones from some days ago
work like a charm, as does fluidsynth played via qsynth.
I haven't been able to reproduce the problem. I'm using ghostess
20100923 compiled against DSSI 1.1.0, and both a pre-DSSI-update
fluidsynth-dssi.so (using DSSI 1.0.0 and fluidsynth 1.0.8) and post-
DSSI-update fluidsynth-dssi.so (using DSSI 1.1.0 and fluidsynth
1.1.2) seem to work fine.
I was wondering if I'm the only one with that
problem?
Since you're not the only one, let's see what you have in common.
Versions? Distros? Did you compile fluidsynth-dssi after the DSSI
upgrade, or are you using a pre-DSSI-upgrade version?
Thanks,
-Sean
28 Sep
28 Sep
7:39 p.m.
New subject: fluidsynth-dssi with dssi 1.1.0 distorted/garbled audio output
Sean,
--- En date de : Lun 27.9.10, Sean Bolton <musound(a)jps.net> a écrit :
De: Sean Bolton <musound(a)jps.net>
Objet: Re: [LAU] fluidsynth-dssi with dssi 1.1.0 distorted/garbled audio output
À: "LAU" <linux-audio-user(a)lists.linuxaudio.org>
Date: Lundi 27 septembre 2010, 2h32
On Sep 26, 2010, at 5:43 AM, Frank
Kober wrote:
has someone already tested fluidsynth-dssi since
dssi
was updated to 1.1.0 ?
I'm getting strongly distorted audio when using
fluidsynth-dssi in any host
(tested with ghostess and
qtractor) and suspect this to be related to that dssi update
until proven wrong. Strangely, all other dssi plugins
including the updated ones from some days ago work like a
charm, as does fluidsynth played via qsynth. Since you're not the only one, let's see what
you have in
common. Versions? Distros? Did you compile
fluidsynth-dssi after the DSSI upgrade, or are you using a
pre-DSSI-upgrade version?
Pedro Lopez-Cabanillas tracked the problem down and posted a bug report against
fluidsynth-1.1.2.
Downgrading to 1.1.1 makes the noise in fluidsynth-dssi disappear. It is appearing when
fluidsynth 1.1.2 is configured with more than 1 stereo channel.
So no dssi problems :)
Regards
Frank
8:10 p.m.
New subject: fluidsynth-dssi with dssi 1.1.0 distorted/garbled audio output
On Sep 28, 2010, at 10:39 AM, Frank Kober wrote:
--- En date de : Lun 27.9.10, Sean Bolton
<musound(a)jps.net> a écrit :
Thanks, Pedro and I have been corresponding. Until a fix is
available, you can either downgrade to fluidsynth 1.1.1 (as you
said), or you can compile fluidsynth 1.1.2 to use floats instead of
doubles, either by adding '-Denable-floats=yes' to the cmake command
line, or by using the autotools build system, which defaults to floats.
-Sean
De: Sean Bolton <musound(a)jps.net>
Objet: Re: [LAU] fluidsynth-dssi with dssi 1.1.0 distorted/garbled
audio output
À: "LAU" <linux-audio-user(a)lists.linuxaudio.org>
Date: Lundi 27 septembre 2010, 2h32
On Sep 26, 2010, at 5:43 AM, Frank
Kober wrote:
has someone already tested fluidsynth-dssi since
dssi
was updated to 1.1.0 ?
I'm getting strongly distorted audio when using
fluidsynth-dssi in any host
(tested with ghostess and
qtractor) and suspect this to be related to that dssi update
until proven wrong. Strangely, all other dssi plugins
including the updated ones from some days ago work like a
charm, as does fluidsynth played via qsynth. Since you're not the only one, let's see
what you have in
common. Versions? Distros? Did you compile
fluidsynth-dssi after the DSSI upgrade, or are you using a
pre-DSSI-upgrade version?
Pedro Lopez-Cabanillas tracked the problem down and posted a bug
report against fluidsynth-1.1.2.
Downgrading to 1.1.1 makes the noise in fluidsynth-dssi disappear.
It is appearing when fluidsynth 1.1.2 is configured with more than
1 stereo channel.
So no dssi problems :) 
11:01 p.m.
New subject: fluidsynth-dssi with dssi 1.1.0 distorted/garbled audio output
On Tuesday 28 September 2010, Frank Kober wrote:
against
fluidsynth-1.1.2.
Sean,
--- En date de : Lun 27.9.10, Sean Bolton <musound(a)jps.net> a écrit :
> De: Sean Bolton <musound(a)jps.net>
> Objet: Re: [LAU] fluidsynth-dssi with dssi 1.1.0 distorted/garbled audio
output
À:
"LAU" <linux-audio-user(a)lists.linuxaudio.org>
Date: Lundi 27 septembre 2010, 2h32
On Sep 26, 2010, at 5:43 AM, Frank
Kober wrote:
has someone already tested fluidsynth-dssi since
dssi
was updated to 1.1.0 ?
I'm getting strongly distorted audio when using
fluidsynth-dssi in any host
(tested with ghostess and
qtractor) and suspect this to be related to that dssi update
until proven wrong. Strangely, all other dssi plugins
including the updated ones from some days ago work like a
charm, as does fluidsynth played via qsynth. Since you're not the only one, let's see
what you have in
common. Versions? Distros? Did you compile
fluidsynth-dssi after the DSSI upgrade, or are you using a
pre-DSSI-upgrade version?
Pedro Lopez-Cabanillas tracked the problem down and posted a bug report Downgrading to 1.1.1 makes the noise in
fluidsynth-dssi disappear. It is
appearing when fluidsynth 1.1.2 is configured with
more than 1 stereo channel.
So no dssi problems :)
The bug is fixed now in FluidSynth SVN revision 372. The workaround is
configuring the 1.1.2 package with CMake and the option "-Denable-floats=on"
or using the old autotools based build system, that already defaults to
floats.
Regards,
Pedro
5198
days inactive
5200
days old
linux-audio-user@lists.linuxaudio.org
5 comments
4 participants
participants (4)
-
Frank Kober -
Orcan Ogetbil -
Pedro Lopez-Cabanillas -
Sean Bolton