4 Feb
2007
4 Feb
'07
8:51 a.m.
taken from http://www.arnoldarts.de/drupal/?q=node/532 :
"One step back, two ahead!"
After almost two years of silence I managed to put together a new
release of JackMix. The name explained: Comparing to jackmix:0.1.0
some experimental features are dropped. On the other hand this release
is the first to use scons for the buildsystem and qt4 for the toolkit.
Download and installation
Download the source here:
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.2.tar.gz
After unpacking (tar xzf jackmix-0.2.tar.gz && cd jackmix-0.2) call
QTDIR=<path to your qt4-dir> scons configure to configure and
afterwards call scons to compile the app. Calling scons install will
install the binary in the chosen bin-directory but you will probably
test JackMix before doing that...
If your qt4 is installed in /usr/include/qt4 and /usr/lib/qt4 (as it
is on gentoo) you need to add qtlibs=/usr/lib/qt4 to the
configuration-command above. I will probably change/extend the
qt-check in the future but for now this has to be used.
Usage
Be sure to have a jackd running, preferable via qjackctl which also
has a nice window to connect inputs and outputs like the back of your
rack.
Next start jackmix. If all is well it will present you with a top-row
of controls, a big matrix in the middle and some controls on the
right. The top controls are the input gain, the right controls are
output gain. The matrix in the middle controls the levels sent from
the various inputs to the outputs.
If you are tired of the simple potis for each channel and want easier
mixing into stereo busses there is help available. Just select the
potis you want replaced by using "Select" from the context menu of
each control and then use "Replace" in the top-left control you want
replaced. If all is working JackMix will choose the biggest possible
replacing control (current available controls are mono-to-mono,
mono-to-stereo and stereo-to-stereo). You can fill the empty places
from the "Edit"-menu.
Adding and removing of input- and output-channels is also done from
the "Edit"-menu.
Please note that if no jackd is running, JackMix will start but not
show any controls. You can tell JackMix to create new channels, but
nothing will happen. Restart JackMix after starting jackd and go on
with your work.
Changelog
Changes since 0.1:
-Using scons instead of autotools/make.
-Using qt4 instead of qt3.
-Dropped the potis borrowed from the kde-project. They where hard to
port to qt4 and the ones from qjackctl are much nicer and where easier
to port.
- The ability to connect faders is dropped. For future releases this
will be replaced by VCA-groups similar to bigger mixing-consoles.
Have a nice week,
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
4 Feb
4 Feb
2:50 p.m.
Arnold Krille wrote:
taken from http://www.arnoldarts.de/drupal/?q=node/532
:
"One step back, two ahead!"
After almost two years of silence I managed to put together a new
release of JackMix. The name explained: Comparing to jackmix:0.1.0
some experimental features are dropped. On the other hand this release
is the first to use scons for the buildsystem and qt4 for the toolkit.
Download and installation
Download the source here:
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.2.tar.gz
After unpacking (tar xzf jackmix-0.2.tar.gz && cd jackmix-0.2) call
QTDIR=<path to your qt4-dir> scons configure to configure and
afterwards call scons to compile the app. Calling scons install will
install the binary in the chosen bin-directory but you will probably
test JackMix before doing that... qtlibs=/usr/lib/qt4
If your qt4 is installed in /usr/include/qt4 and /usr/lib/qt4 (as it
is on gentoo) you need to add qtlibs=/usr/lib/qt4 to the
configuration-command above. I will probably change/extend the
qt-check in the future but for now this has to be used.
Usage
Be sure to have a jackd running, preferable via qjackctl which also
has a nice window to connect inputs and outputs like the back of your
rack.
Next start jackmix. If all is well it will present you with a top-row
of controls, a big matrix in the middle and some controls on the
right. The top controls are the input gain, the right controls are
output gain. The matrix in the middle controls the levels sent from
the various inputs to the outputs.
If you are tired of the simple potis for each channel and want easier
mixing into stereo busses there is help available. Just select the
potis you want replaced by using "Select" from the context menu of
each control and then use "Replace" in the top-left control you want
replaced. If all is working JackMix will choose the biggest possible
replacing control (current available controls are mono-to-mono,
mono-to-stereo and stereo-to-stereo). You can fill the empty places
from the "Edit"-menu.
Adding and removing of input- and output-channels is also done from
the "Edit"-menu.
Please note that if no jackd is running, JackMix will start but not
show any controls. You can tell JackMix to create new channels, but
nothing will happen. Restart JackMix after starting jackd and go on
with your work.
Changelog
Changes since 0.1:
-Using scons instead of autotools/make.
-Using qt4 instead of qt3.
-Dropped the potis borrowed from the kde-project. They where hard to
port to qt4 and the ones from qjackctl are much nicer and where easier
to port.
- The ability to connect faders is dropped. For future releases this
will be replaced by VCA-groups similar to bigger mixing-consoles.
Have a nice week,
Arnold
hi, i am really not aware of what i am missing.
i tried now:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
QTDIR=/usr/share/qt4 scons configure
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
scons: Nothing to be done for `configure'.
scons: done building targets.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
-----------------
and:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
QTDIR=/usr/share/qt4 qtlibs=/usr/lib/qt4 scons configure
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
scons: Nothing to be done for `configure'.
scons: done building targets.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
..........
the first command ( the QTDIR-PATH) is copied from /user/.bash_profile,
it works to compile a lot of software.
if you have any suggestion, please respond, cause i would like to try
the jack mix in action!
cheers,
doc
5 Feb
5 Feb
6:46 a.m.
2007/2/4, Dragan Noveski <perodog(a)gmx.net>et>:
Arnold Krille wrote:
Hmm, how does that -l get clashed with the -L? (I am no buildsystem pro...)
What do the following commands return on your system?
pkg-config --libs jack
pkg-config --libs liblo
pkg-config --cflags jack
pkg-config --cflags liblo
(I just see that liblo isn't needed. Will remove it for the next release)
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
"One step back, two ahead!"
hi,
i am really not aware of what i am missing.
i tried now:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
QTDIR=/usr/share/qt4 scons configure
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
scons: Nothing to be done for `configure'.
scons: done building targets.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
9:21 a.m.
Arnold Krille wrote:
2007/2/4, Dragan Noveski <perodog(a)gmx.net>et>:
thanks for the support arnold, here he answers:
nowhiskey@murija2:~$ pkg-config --libs jack
-L/usr/local/lib -ljack
nowhiskey@murija2:~$ pkg-config --libs liblo
-llo -lpthread
nowhiskey@murija2:~$ pkg-config --cflags jack
-I/usr/local/include
nowhiskey@murija2:~$ pkg-config --cflags liblo
nowhiskey@murija2:~$
i have liblo and liblo-dev, both v0.23-2.1
cheers,
doc
Arnold Krille wrote:
Hmm, how does that -l get clashed with the -L? (I am no buildsystem
pro...)
What do the following commands return on your system?
pkg-config --libs jack
pkg-config --libs liblo
pkg-config --cflags jack
pkg-config --cflags liblo
(I just see that liblo isn't needed. Will remove it for the next release)
Arnold
"One step back, two ahead!"
hi,
i am really not aware of what i am missing.
i tried now:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
QTDIR=/usr/share/qt4 scons configure
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
scons: Nothing to be done for `configure'.
scons: done building targets.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
10:39 a.m.
2007/2/5, Dragan Noveski <perodog(a)gmx.net>et>:
Arnold Krille wrote:
hmm, could you try
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.2-r1.tar.…
?
I don't know any python (thats what these scons-scripts are) and so I
don't know how to really set variables...
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
2007/2/4, Dragan Noveski
<perodog(a)gmx.net>et>:
thanks for the support arnold, here he answers:
nowhiskey@murija2:~$ pkg-config --libs jack
-L/usr/local/lib -ljack
nowhiskey@murija2:~$ pkg-config --libs liblo
-llo -lpthread
nowhiskey@murija2:~$ pkg-config --cflags jack
-I/usr/local/include
nowhiskey@murija2:~$ pkg-config --cflags liblo
nowhiskey@murija2:~$ Arnold Krille wrote:
Hmm, how does that -l get clashed
with the -L? (I am no buildsystem
pro...)
What do the following commands return on your system?
pkg-config --libs jack
pkg-config --libs liblo
pkg-config --cflags jack
pkg-config --cflags liblo "One step back, two ahead!"
hi,
i am really not aware of what i am missing.
i tried now:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
QTDIR=/usr/share/qt4 scons configure
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
scons: Nothing to be done for `configure'.
scons: done building targets.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
Checking for liblo...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
10:48 a.m.
Arnold Krille wrote:
...
hmm, could you try
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.2-r1.tar.…
?
I don't know any python (thats what these scons-scripts are) and so I
don't know how to really set variables...
Arnold
still does not works, i am pretty sure that the bug is not here on the
machine, since i am able to compile so much other appis:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o backend/jack_backend.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ibackend -I. -Ibackend backend/jack_backend.cpp
ar rc backend/libjackmix_backend.a backend/jack_backend.o
ranlib backend/libjackmix_backend.a
g++ -o jackmix/main.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/main.cpp
/usr/share/qt4/bin/moc -o jackmix/mainwindow.moc jackmix/mainwindow.h
g++ -o jackmix/mainwindow.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/mainwindow.cpp
/usr/share/qt4/bin/moc -o libmatrix/mixingmatrix.moc
libmatrix/mixingmatrix.h
g++ -o libmatrix/mixingmatrix.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibmatrix -I. -Ilibmatrix -Ibackend -Ilibgui
libmatrix/mixingmatrix.cpp
ar rc libmatrix/libjackmix_mixingmatrix.a libmatrix/mixingmatrix.o
ranlib libmatrix/libjackmix_mixingmatrix.a
/usr/share/qt4/bin/moc -o libelements/stereo_elements.moc
libelements/stereo_elements.h
g++ -o libelements/stereo_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/stereo_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libelements/aux_elements.moc
libelements/aux_elements.h
g++ -o libelements/aux_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/aux_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
ar rc libelements/libjackmix_mixingelements.a
libelements/stereo_elements.o libelements/aux_elements.o
ranlib libelements/libjackmix_mixingelements.a
/usr/share/qt4/bin/moc -o libgui/channelselector.moc
libgui/channelselector.h
g++ -o libgui/channelselector.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/channelselector.cpp
/usr/share/qt4/bin/moc -o libgui/slider.moc libgui/slider.h
g++ -o libgui/slider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/slider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatcontrol.moc libgui/qfloatcontrol.h
g++ -o libgui/qfloatcontrol.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatcontrol.cpp
/usr/share/qt4/bin/moc -o libgui/qfloatslider.moc libgui/qfloatslider.h
g++ -o libgui/qfloatslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatpoti.moc libgui/qfloatpoti.h
g++ -o libgui/qfloatpoti.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatpoti.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qtickmarks.moc libgui/qtickmarks.h
g++ -o libgui/qtickmarks.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qtickmarks.cpp
/usr/share/qt4/bin/moc -o libgui/volumeslider.moc libgui/volumeslider.h
g++ -o libgui/volumeslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/volumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/stereovolumeslider.moc
libgui/stereovolumeslider.h
g++ -o libgui/stereovolumeslider.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui
libgui/stereovolumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qsynthKnob.moc libgui/qsynthKnob.h
g++ -o libgui/qsynthKnob.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qsynthKnob.cpp
ar rc libgui/libjackmix_gui.a libgui/channelselector.o libgui/slider.o
libgui/qfloatcontrol.o libgui/qfloatslider.o libgui/qfloatpoti.o
libgui/qtickmarks.o libgui/volumeslider.o libgui/stereovolumeslider.o
libgui/qsynthKnob.o
ranlib libgui/libjackmix_gui.a
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
i don´t know any programming, but i expect that this is some small
thing, which causes the error.
cheers,
doc
12:38 p.m.
On Monday 05 February 2007, Dragan Noveski wrote:
Arnold Krille wrote:
The compilation lines look funny (besides the weird -l-L/usr/local/lib (which
is probably an artefact of some string being empty)). Why does every g++ -c
call actually have -lfoo arguments? Normally the linking against external
libs is done when the object file are linked together into an executable.
Flo
--
Palimm Palimm!
http://tapas.affenbande.org
...
hmm, could you try
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.2-r1.ta
r.gz
?
I don't know any python (thats what these scons-scripts are) and so I
don't know how to really set variables...
Arnold
still does not works, i am pretty sure that the bug is not here on the
machine, since i am able to compile so much other appis:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o backend/jack_backend.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ibackend -I. -Ibackend backend/jack_backend.cpp
ar rc backend/libjackmix_backend.a backend/jack_backend.o
ranlib backend/libjackmix_backend.a
g++ -o jackmix/main.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/main.cpp
/usr/share/qt4/bin/moc -o jackmix/mainwindow.moc jackmix/mainwindow.h
g++ -o jackmix/mainwindow.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/mainwindow.cpp
/usr/share/qt4/bin/moc -o libmatrix/mixingmatrix.moc
libmatrix/mixingmatrix.h
g++ -o libmatrix/mixingmatrix.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibmatrix -I. -Ilibmatrix -Ibackend -Ilibgui
libmatrix/mixingmatrix.cpp
ar rc libmatrix/libjackmix_mixingmatrix.a libmatrix/mixingmatrix.o
ranlib libmatrix/libjackmix_mixingmatrix.a
/usr/share/qt4/bin/moc -o libelements/stereo_elements.moc
libelements/stereo_elements.h
g++ -o libelements/stereo_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/stereo_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libelements/aux_elements.moc
libelements/aux_elements.h
g++ -o libelements/aux_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/aux_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
ar rc libelements/libjackmix_mixingelements.a
libelements/stereo_elements.o libelements/aux_elements.o
ranlib libelements/libjackmix_mixingelements.a
/usr/share/qt4/bin/moc -o libgui/channelselector.moc
libgui/channelselector.h
g++ -o libgui/channelselector.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/channelselector.cpp
/usr/share/qt4/bin/moc -o libgui/slider.moc libgui/slider.h
g++ -o libgui/slider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/slider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatcontrol.moc libgui/qfloatcontrol.h
g++ -o libgui/qfloatcontrol.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatcontrol.cpp
/usr/share/qt4/bin/moc -o libgui/qfloatslider.moc libgui/qfloatslider.h
g++ -o libgui/qfloatslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatpoti.moc libgui/qfloatpoti.h
g++ -o libgui/qfloatpoti.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatpoti.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qtickmarks.moc libgui/qtickmarks.h
g++ -o libgui/qtickmarks.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qtickmarks.cpp
/usr/share/qt4/bin/moc -o libgui/volumeslider.moc libgui/volumeslider.h
g++ -o libgui/volumeslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/volumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/stereovolumeslider.moc
libgui/stereovolumeslider.h
g++ -o libgui/stereovolumeslider.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui
libgui/stereovolumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qsynthKnob.moc libgui/qsynthKnob.h
g++ -o libgui/qsynthKnob.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qsynthKnob.cpp
ar rc libgui/libjackmix_gui.a libgui/channelselector.o libgui/slider.o
libgui/qfloatcontrol.o libgui/qfloatslider.o libgui/qfloatpoti.o
libgui/qtickmarks.o libgui/volumeslider.o libgui/stereovolumeslider.o
libgui/qsynthKnob.o
ranlib libgui/libjackmix_gui.a
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ 
2:10 p.m.
On 2/5/07, Florian Schmidt <mista.tapas(a)gmx.net> wrote:
On Monday 05 February 2007, Dragan Noveski wrote:
I think those are -Ifoo, not -lfoo. In the font used by my mail
reader (gmail in firefox on fc4/gnome), I (capital i) and I (small l)
look identical. Maybe in yours, too, Flo?
Agreed on -l-L/usr/local/lib though, which is obviously bogus.
Arnold Krille wrote:
The compilation lines look funny (besides the weird -l-L/usr/local/lib (which
is probably an artefact of some string being empty)). Why does every g++ -c
call actually have -lfoo arguments? Normally the linking against external
libs is done when the object file are linked together into an executable.
Flo
--
Palimm Palimm!
http://tapas.affenbande.org
...
hmm, could you try
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.2-r1.ta
r.gz
?
I don't know any python (thats what these scons-scripts are) and so I
don't know how to really set variables...
Arnold
still does not works, i am pretty sure that the bug is not here on the
machine, since i am able to compile so much other appis:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o backend/jack_backend.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ibackend -I. -Ibackend backend/jack_backend.cpp
ar rc backend/libjackmix_backend.a backend/jack_backend.o
ranlib backend/libjackmix_backend.a
g++ -o jackmix/main.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/main.cpp
/usr/share/qt4/bin/moc -o jackmix/mainwindow.moc jackmix/mainwindow.h
g++ -o jackmix/mainwindow.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/mainwindow.cpp
/usr/share/qt4/bin/moc -o libmatrix/mixingmatrix.moc
libmatrix/mixingmatrix.h
g++ -o libmatrix/mixingmatrix.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibmatrix -I. -Ilibmatrix -Ibackend -Ilibgui
libmatrix/mixingmatrix.cpp
ar rc libmatrix/libjackmix_mixingmatrix.a libmatrix/mixingmatrix.o
ranlib libmatrix/libjackmix_mixingmatrix.a
/usr/share/qt4/bin/moc -o libelements/stereo_elements.moc
libelements/stereo_elements.h
g++ -o libelements/stereo_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/stereo_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libelements/aux_elements.moc
libelements/aux_elements.h
g++ -o libelements/aux_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/aux_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
ar rc libelements/libjackmix_mixingelements.a
libelements/stereo_elements.o libelements/aux_elements.o
ranlib libelements/libjackmix_mixingelements.a
/usr/share/qt4/bin/moc -o libgui/channelselector.moc
libgui/channelselector.h
g++ -o libgui/channelselector.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/channelselector.cpp
/usr/share/qt4/bin/moc -o libgui/slider.moc libgui/slider.h
g++ -o libgui/slider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/slider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatcontrol.moc libgui/qfloatcontrol.h
g++ -o libgui/qfloatcontrol.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatcontrol.cpp
/usr/share/qt4/bin/moc -o libgui/qfloatslider.moc libgui/qfloatslider.h
g++ -o libgui/qfloatslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatpoti.moc libgui/qfloatpoti.h
g++ -o libgui/qfloatpoti.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatpoti.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qtickmarks.moc libgui/qtickmarks.h
g++ -o libgui/qtickmarks.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qtickmarks.cpp
/usr/share/qt4/bin/moc -o libgui/volumeslider.moc libgui/volumeslider.h
g++ -o libgui/volumeslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/volumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/stereovolumeslider.moc
libgui/stereovolumeslider.h
g++ -o libgui/stereovolumeslider.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui
libgui/stereovolumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qsynthKnob.moc libgui/qsynthKnob.h
g++ -o libgui/qsynthKnob.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qsynthKnob.cpp
ar rc libgui/libjackmix_gui.a libgui/channelselector.o libgui/slider.o
libgui/qfloatcontrol.o libgui/qfloatslider.o libgui/qfloatpoti.o
libgui/qtickmarks.o libgui/volumeslider.o libgui/stereovolumeslider.o
libgui/qsynthKnob.o
ranlib libgui/libjackmix_gui.a
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ 
4 Feb
4 Feb
3:07 p.m.
New subject: [linux-audio-user] Re: [linux-audio-dev] [ANN] JackMix 0.2 fresh on the shelfs
Arnold Krille wrote:
...
Changelog
Changes since 0.1:
-Using scons instead of autotools/make.
-Using qt4 instead of qt3.
-Dropped the potis borrowed from the kde-project. They where hard to
port to qt4 and the ones from qjackctl are much nicer and where easier
to port.
Duh, I didn't knew qjackctl had potis :)
Cheers.
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
5 Feb
5 Feb
7:03 p.m.
On So, 04.02.07 13:51 "Arnold Krille" <arnold.krille(a)gmail.com> wrote:
taken from http://www.arnoldarts.de/drupal/?q=node/532
:
"One step back, two ahead!"
After almost two years of silence I managed to put together a new
release of JackMix. The name explained: Comparing to jackmix:0.1.0
some experimental features are dropped. On the other hand this release
is the first to use scons for the buildsystem and qt4 for the toolkit.
Download and installation
Download the source here:
http://www.arnoldarts.de/drupal/files/downloads/jackmix/jackmix-0.2.tar.gz
After unpacking (tar xzf jackmix-0.2.tar.gz && cd jackmix-0.2) call
QTDIR=<path to your qt4-dir> scons configure to configure and
afterwards call scons to compile the app. Calling scons install will
install the binary in the chosen bin-directory but you will probably
test JackMix before doing that...
If your qt4 is installed in /usr/include/qt4 and /usr/lib/qt4 (as it
is on gentoo) you need to add qtlibs=/usr/lib/qt4 to the
configuration-command above. I will probably change/extend the
qt-check in the future but for now this has to be used.
Usage
Be sure to have a jackd running, preferable via qjackctl which also
has a nice window to connect inputs and outputs like the back of your
rack.
Next start jackmix. If all is well it will present you with a top-row
of controls, a big matrix in the middle and some controls on the
right. The top controls are the input gain, the right controls are
output gain. The matrix in the middle controls the levels sent from
the various inputs to the outputs.
If you are tired of the simple potis for each channel and want easier
mixing into stereo busses there is help available. Just select the
potis you want replaced by using "Select" from the context menu of
each control and then use "Replace" in the top-left control you want
replaced. If all is working JackMix will choose the biggest possible
replacing control (current available controls are mono-to-mono,
mono-to-stereo and stereo-to-stereo). You can fill the empty places
from the "Edit"-menu.
Adding and removing of input- and output-channels is also done from
the "Edit"-menu.
Please note that if no jackd is running, JackMix will start but not
show any controls. You can tell JackMix to create new channels, but
nothing will happen. Restart JackMix after starting jackd and go on
with your work.
Changelog
Changes since 0.1:
-Using scons instead of autotools/make.
-Using qt4 instead of qt3.
-Dropped the potis borrowed from the kde-project. They where hard to
port to qt4 and the ones from qjackctl are much nicer and where easier
to port.
- The ability to connect faders is dropped. For future releases this
will be replaced by VCA-groups similar to bigger mixing-consoles.
Have a nice week,
Arnold
Hmm, fails here with:
QTDIR=/usr \
QLIBS=/usr/lib/qt4 \
scons configure
...
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/bin/uic
Checking for UIC version: fine - Qt User Interface Compiler version
4.2.2
Checking for moc: moc was foundas /usr/bin/moc
Checking for rcc: rcc was found as /usr/bin/rcc
Checking for the qt includes: the qt headers were found
in /usr/include/qt4/
Checking for jack...yes
....
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-ljack /usr/lib/gcc/i686-pc-linux-gnu/4.1.1/../../../../i686-pc-linux-gnu/bin/ld:
cannot find -lQtCore
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
Any ideas?
Regards,
Tom
6 Feb
6 Feb
6:41 a.m.
2007/2/6, Thomas Kuther <gimpel(a)sonnenkinder.org>rg>:
On Di, 06.02.07 00:01 Thomas Kuther
<gimpel(a)sonnenkinder.org> wrote:
> Hmm, fails here with:
> QTDIR=/usr \
> QLIBS=/usr/lib/qt4 \
> scons configure
Has to be 'QTDIR=/usr scons configure qtlibs=/usr/lib/qt4'.
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
7:26 a.m.
On Di, 06.02.07 11:41 "Arnold Krille" <arnold.krille(a)gmail.com> wrote:
2007/2/6, Thomas Kuther
<gimpel(a)sonnenkinder.org>rg>:
Thanks, that did it.
On Di, 06.02.07 00:01 Thomas Kuther
<gimpel(a)sonnenkinder.org> wrote:
> Hmm, fails here with:
> QTDIR=/usr \
> QLIBS=/usr/lib/qt4 \
> scons configure
Has to be 'QTDIR=/usr scons configure qtlibs=/usr/lib/qt4'.
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
HAHAAAAA ^^
8:20 a.m.
Arnold Krille wrote:
2007/2/6, Thomas Kuther
<gimpel(a)sonnenkinder.org>rg>:
hi arnold,
i just found out, that on my system in /usr/bin there are some symlinks
showing to qt3.
that were: lrelease lupdate moc qmake uic.
they all have been showing to qt3, so i changed them now to show to qt4.
obviously i don´t have to run scons configure, cause i have the path
declared in my .bash_profile, at least the error is the same if i run
scons-configure or not.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
Checking for UIC version : fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o backend/jack_backend.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ibackend -I. -Ibackend backend/jack_backend.cpp
ar rc backend/libjackmix_backend.a backend/jack_backend.o
ranlib backend/libjackmix_backend.a
g++ -o jackmix/main.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/main.cpp
/usr/share/qt4/bin/moc -o jackmix/mainwindow.moc jackmix/mainwindow.h
g++ -o jackmix/mainwindow.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ijackmix -Ilibgui -Ilibelements -Ilibcore
-Ilibmatrix -Ibackend jackmix/mainwindow.cpp
/usr/share/qt4/bin/moc -o libmatrix/mixingmatrix.moc
libmatrix/mixingmatrix.h
g++ -o libmatrix/mixingmatrix.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibmatrix -I. -Ilibmatrix -Ibackend -Ilibgui
libmatrix/mixingmatrix.cpp
ar rc libmatrix/libjackmix_mixingmatrix.a libmatrix/mixingmatrix.o
ranlib libmatrix/libjackmix_mixingmatrix.a
/usr/share/qt4/bin/moc -o libelements/stereo_elements.moc
libelements/stereo_elements.h
g++ -o libelements/stereo_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/stereo_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libelements/aux_elements.moc
libelements/aux_elements.h
g++ -o libelements/aux_elements.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibelements -I. -Ilibelements
-Ilibmatrix -Ilibgui -Ibackend libelements/aux_elements.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
ar rc libelements/libjackmix_mixingelements.a
libelements/stereo_elements.o libelements/aux_elements.o
ranlib libelements/libjackmix_mixingelements.a
/usr/share/qt4/bin/moc -o libgui/channelselector.moc
libgui/channelselector.h
g++ -o libgui/channelselector.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/channelselector.cpp
/usr/share/qt4/bin/moc -o libgui/slider.moc libgui/slider.h
g++ -o libgui/slider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/slider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatcontrol.moc libgui/qfloatcontrol.h
g++ -o libgui/qfloatcontrol.o -c -I/usr/share/qt4/include -Wall -fpic
-O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatcontrol.cpp
/usr/share/qt4/bin/moc -o libgui/qfloatslider.moc libgui/qfloatslider.h
g++ -o libgui/qfloatslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qfloatpoti.moc libgui/qfloatpoti.h
g++ -o libgui/qfloatpoti.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qfloatpoti.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qtickmarks.moc libgui/qtickmarks.h
g++ -o libgui/qtickmarks.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qtickmarks.cpp
/usr/share/qt4/bin/moc -o libgui/volumeslider.moc libgui/volumeslider.h
g++ -o libgui/volumeslider.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/volumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/stereovolumeslider.moc
libgui/stereovolumeslider.h
g++ -o libgui/stereovolumeslider.o -c -I/usr/share/qt4/include -Wall
-fpic -O2 -DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui
libgui/stereovolumeslider.cpp
libgui/float_base.h:26: warning: 'class FloatElement' has virtual
functions but non-virtual destructor
/usr/share/qt4/bin/moc -o libgui/qsynthKnob.moc libgui/qsynthKnob.h
g++ -o libgui/qsynthKnob.o -c -I/usr/share/qt4/include -Wall -fpic -O2
-DNDEBUG -DNO_DEBUG -Ilibgui -I. -Ilibgui libgui/qsynthKnob.cpp
ar rc libgui/libjackmix_gui.a libgui/channelselector.o libgui/slider.o
libgui/qfloatcontrol.o libgui/qfloatslider.o libgui/qfloatpoti.o
libgui/qtickmarks.o libgui/volumeslider.o libgui/stereovolumeslider.o
libgui/qsynthKnob.o
ranlib libgui/libjackmix_gui.a
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
..............
perhaps the symlink-thing brings you to another idea, what could be
wrong here?
cheers,
doc
On Di, 06.02.07 00:01 Thomas Kuther
<gimpel(a)sonnenkinder.org> wrote:
> Hmm, fails here with:
> QTDIR=/usr \
> QLIBS=/usr/lib/qt4 \
> scons configure
Has to be 'QTDIR=/usr scons configure qtlibs=/usr/lib/qt4'.
Arnold
8:47 a.m.
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
hi arnold,
i just found out, that on my system in /usr/bin there are some symlinks
showing to qt3.
that were: lrelease lupdate moc qmake uic.
they all have been showing to qt3, so i changed them now to show to qt4.
obviously i don´t have to run scons configure, cause i have the path
declared in my .bash_profile, at least the error is the same if i run
scons-configure or not.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
This line above shows that scons already gets the right paths for qt4...
Checking for UIC version : fine
- Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...yes
scons: done reading SConscript files.
scons: Building targets ...
<snip>
g++ -o jackmix/jackmix jackmix/main.o
jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
That is what worries me. Why are these clashed together? They seem not
to come from the qt-checks as your qt isn't in /usr/local. It seems
the check for jack produces these.
Maybe you can edit jackmix/SConstruct and replace the env['jack_LIBS']
with "-ljack"?
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
perhaps the symlink-thing brings you to another idea, what could be
wrong here?
The symlinking shouldn't be the culprit...
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
9:26 a.m.
Arnold Krille wrote:
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
hmm, it gives an very fast error:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...yes
Checking for liblo...yes
KeyError: 'ljack':
File "SConstruct", line 53:
env.subdirs(['libcore','libgui','backend','libmatrix','libelements','jackmix'])
File "./admin/generic.py", line 619:
lenv.SConscript(lenv.join(i, 'SConscript'))
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 494:
return apply(_SConscript, [self.fs,] + files, {'exports' : exports})
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 226:
exec _file_ in call_stack[-1].globals
File "jackmix/SConscript", line 15:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + env['ljack']
File "/usr/lib/python2.3/site-packages/SCons/Environment.py", line 295:
return self._dict[key]
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
is python2.3 ok? python2.3 is the rest from my old demudi and is not
debian at all, but i dont want to update cause i am in the middle of
production.
cheers,
doc
hi arnold,
i just found out, that on my system in /usr/bin there are some symlinks
showing to qt3.
that were: lrelease lupdate moc qmake uic.
they all have been showing to qt3, so i changed them now to show to qt4.
obviously i don´t have to run scons configure, cause i have the path
declared in my .bash_profile, at least the error is the same if i run
scons-configure or not.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for uic: uic was found as /usr/share/qt4/bin/uic
This line above shows that scons already gets the right paths for qt4...
Checking for UIC version :
fine - Qt User
Interface Compiler version 4.2.1
Checking for moc: moc was found as /usr/share/qt4/bin/moc
Checking for rcc: rcc was found as /usr/share/qt4/bin/rcc
Checking for the qt includes : ok /usr/share/qt4/include
Checking for jack...yes
scons: done reading SConscript files.
scons: Building targets ...
<snip>
g++ -o jackmix/jackmix jackmix/main.o
jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support
-l-L/usr/local/lib -ljack
/usr/bin/ld: cannot find -l-L/usr/local/lib
That is what worries me. Why are these clashed together? They seem not
to come from the qt-checks as your qt isn't in /usr/local. It seems
the check for jack produces these.
Maybe you can edit jackmix/SConstruct and replace the env['jack_LIBS']
with "-ljack"?
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
perhaps the symlink-thing brings you to another idea, what could be
wrong here?
The symlinking shouldn't be the culprit...
Arnold
1:44 p.m.
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
Arnold Krille wrote:
Please replace the full "env['jack_LIBS']" with "-ljack"!
env['ljack'] is definitly wrong and not what I meant.
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
Maybe you can edit jackmix/SConstruct and replace
the env['jack_LIBS']
with "-ljack"?
hmm, it gives an very fast error:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...yes
Checking for liblo...yes
KeyError: 'ljack':
File "SConstruct", line 53:
env.subdirs(['libcore','libgui','backend','libmatrix','libelements','jackmix'])
File "./admin/generic.py", line 619:
lenv.SConscript(lenv.join(i, 'SConscript'))
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 494:
return apply(_SConscript, [self.fs,] + files, {'exports' : exports})
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 226:
exec _file_ in call_stack[-1].globals
File "jackmix/SConscript", line 15:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + env['ljack']
File "/usr/lib/python2.3/site-packages/SCons/Environment.py", line 295:
return self._dict[key]
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
2:09 p.m.
Arnold Krille wrote:
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
sorry, i did not get it, so the line looks now:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + 'ljack'
but:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support -lljack
/usr/bin/ld: cannot find -lljack
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
strange?
cheers,
doc
Arnold Krille wrote:
Please replace the full "env['jack_LIBS']" with "-ljack"!
env['ljack'] is definitly wrong and not what I meant.
Arnold
Maybe you can edit jackmix/SConstruct and replace
the env['jack_LIBS']
with "-ljack"?
hmm, it gives an very fast error:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...yes
Checking for liblo...yes
KeyError: 'ljack':
File "SConstruct", line 53:
env.subdirs(['libcore','libgui','backend','libmatrix','libelements','jackmix'])
File "./admin/generic.py", line 619:
lenv.SConscript(lenv.join(i, 'SConscript'))
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 494:
return apply(_SConscript, [self.fs,] + files, {'exports' : exports})
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 226:
exec _file_ in call_stack[-1].globals
File "jackmix/SConscript", line 15:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + env['ljack']
File "/usr/lib/python2.3/site-packages/SCons/Environment.py", line
295:
return self._dict[key]
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
2:12 p.m.
Dragan Noveski wrote:
Arnold Krille wrote:
or after running scons -c,
than scons:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
Retrieved `backend/jack_backend.o' from cache
Retrieved `backend/libjackmix_backend.a' from cache
Retrieved `jackmix/main.o' from cache
Retrieved `jackmix/mainwindow.moc' from cache
Retrieved `jackmix/mainwindow.o' from cache
Retrieved `libmatrix/mixingmatrix.moc' from cache
Retrieved `libmatrix/mixingmatrix.o' from cache
Retrieved `libmatrix/libjackmix_mixingmatrix.a' from cache
Retrieved `libelements/stereo_elements.moc' from cache
Retrieved `libelements/stereo_elements.o' from cache
Retrieved `libelements/aux_elements.moc' from cache
Retrieved `libelements/aux_elements.o' from cache
Retrieved `libelements/libjackmix_mixingelements.a' from cache
Retrieved `libgui/channelselector.moc' from cache
Retrieved `libgui/channelselector.o' from cache
Retrieved `libgui/slider.moc' from cache
Retrieved `libgui/slider.o' from cache
Retrieved `libgui/qfloatcontrol.moc' from cache
Retrieved `libgui/qfloatcontrol.o' from cache
Retrieved `libgui/qfloatslider.moc' from cache
Retrieved `libgui/qfloatslider.o' from cache
Retrieved `libgui/qfloatpoti.moc' from cache
Retrieved `libgui/qfloatpoti.o' from cache
Retrieved `libgui/qtickmarks.moc' from cache
Retrieved `libgui/qtickmarks.o' from cache
Retrieved `libgui/volumeslider.moc' from cache
Retrieved `libgui/volumeslider.o' from cache
Retrieved `libgui/stereovolumeslider.moc' from cache
Retrieved `libgui/stereovolumeslider.o' from cache
Retrieved `libgui/qsynthKnob.moc' from cache
Retrieved `libgui/qsynthKnob.o' from cache
Retrieved `libgui/libjackmix_gui.a' from cache
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support -lljack
/usr/bin/ld: cannot find -lljack
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
2007/2/6, Dragan Noveski
<perodog(a)gmx.net>et>:
sorry, i did not get it, so the line looks now:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + 'ljack'
but:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...(cached) yes
scons: done reading SConscript files.
scons: Building targets ...
g++ -o jackmix/jackmix jackmix/main.o jackmix/mainwindow.o -Llibgui
-Llibelements -Llibcore -Llibmatrix -Lbackend -L/usr/share/qt4/lib
-ljackmix_mixingmatrix -ljackmix_mixingelements -ljackmix_gui
-ljackmix_backend -lQtCore -lQtGui -lQtXml -lQt3Support -lljack
/usr/bin/ld: cannot find -lljack
collect2: ld returned 1 exit status
scons: *** [jackmix/jackmix] Error 1
scons: building terminated because of errors.
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ Arnold Krille wrote:
Please replace the full "env['jack_LIBS']" with "-ljack"!
env['ljack'] is definitly wrong and not what I meant.
Arnold
Maybe you can edit jackmix/SConstruct and replace
the
env['jack_LIBS']
with "-ljack"?
hmm, it gives an
very fast error:
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$ scons
scons: Reading SConscript files ...
Checking for jack...yes
Checking for liblo...yes
KeyError: 'ljack':
File "SConstruct", line 53:
env.subdirs(['libcore','libgui','backend','libmatrix','libelements','jackmix'])
File "./admin/generic.py", line 619:
lenv.SConscript(lenv.join(i, 'SConscript'))
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 494:
return apply(_SConscript, [self.fs,] + files, {'exports' :
exports})
File "/usr/lib/python2.3/site-packages/SCons/Script/SConscript.py",
line 226:
exec _file_ in call_stack[-1].globals
File "jackmix/SConscript", line 15:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + env['ljack']
File "/usr/lib/python2.3/site-packages/SCons/Environment.py", line
295:
return self._dict[key]
nowhiskey@murija2:~/software/nove/j_mix/jackmix-0.2$
strange?
cheers,
doc
4:30 p.m.
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
Arnold Krille wrote:
It has to be:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + '-ljack'
Don't forget the '-'!
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
2007/2/6, Dragan Noveski
<perodog(a)gmx.net>et>:
sorry, i did not get
it, so the line looks now:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + 'ljack' Arnold Krille wrote:
> Maybe you can edit jackmix/SConstruct and replace the env['jack_LIBS']
> with "-ljack"?
Please replace the full
"env['jack_LIBS']" with "-ljack"!
env['ljack'] is definitly wrong and not what I meant.
6:25 p.m.
Arnold Krille wrote:
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
yeah, that was the hack - sorry but if don`t know very much python,
believe me, i do not at all!!
but it worked out now, i used the here announced version 0.2, not the
jackmix-0.2-r1, which you posted here later.
jackmix is running good here!
so, problem solved, very much thanks for the support!
FEATURE REQUEST: it would be very good, if when creating channels and
giving them a name, the names would appear not only in qjack but also in
the jackmix canvas.
cheers,
doc
Arnold Krille wrote:
sorry, i did not get
it, so the line looks now:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + 'ljack'
It has to be:
myenv.libs='jackmix_mixingmatrix jackmix_mixingelements jackmix_gui
jackmix_backend QtCore' + env['DEBUG'] + ' QtGui' +
env['DEBUG'] + '
QtXml' + env['DEBUG'] + ' Qt3Support ' + '-ljack'
Don't forget the '-'!
Arnold
2007/2/6, Dragan Noveski
<perodog(a)gmx.net>et>:
> Arnold Krille wrote:
> > Maybe you can edit jackmix/SConstruct and replace the
env['jack_LIBS']
> with
"-ljack"?
Please replace the full "env['jack_LIBS']"
with "-ljack"!
env['ljack'] is definitly wrong and not what I meant.
7 Feb
7 Feb
7:53 a.m.
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
FEATURE REQUEST: it would be very good, if when
creating channels and
giving them a name, the names would appear not only in qjack but also in
the jackmix canvas.
Ticket added...
That was already on my mind, but not written down.
Arnold
--
visit http://www.arnoldarts.de/
---
Wenn man mit Raubkopien Bands wie Brosis oder Britney Spears wirklich
verhindern könnte, würde ich mir noch heute einen Stapel Brenner und
einen Sack Rohlinge kaufen.
8:30 a.m.
Arnold Krille wrote:
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
yeah, yesterday after writing the last post, i was having a look at your
homepage, so i think that you plan lot more nice things.
for my reasons, implementing midi would be very good, so we can control
levels with a midi board!
but look, there is this funktion "right-click" select/replace.
i don´t think that it is working here. is it already finished or still
in progress, so should i expect it to work or not?
cheers,
doc
FEATURE REQUEST: it would be very good, if when
creating channels and
giving them a name, the names would appear not only in qjack but also in
the jackmix canvas.
Ticket added...
That was already on my mind, but not written down.
Arnold
8:31 a.m.
Arnold Krille wrote:
2007/2/6, Dragan Noveski <perodog(a)gmx.net>et>:
but, allow me to be little off-topic: another idea of yours which i
really like is that audio-tech-game-what-it-is-called about guessing
frequencies.
that sound really great, are you moving forward with it?
cheers,
doc
FEATURE REQUEST: it would be very good, if when
creating channels and
giving them a name, the names would appear not only in qjack but also in
the jackmix canvas.
Ticket added...
That was already on my mind, but not written down.
Arnold
6493
days inactive
6496
days old
linux-audio-user@lists.linuxaudio.org
23 comments
6 participants
participants (6)
-
Arnold Krille -
Dragan Noveski -
Florian Schmidt -
Paul Coccoli -
Rui Nuno Capela -
Thomas Kuther