12 Jan
2017
12 Jan
'17
10:37 a.m.
For those looking for high bit rate, non-usb, stable multi-channel input
and output on the pi (6 in 8 out), this current Kickstarter may be of
interest. I'm not affiliated with the guy responsible for this , but I do
have his first board, the 2 in 2 out version. So far it seems very stable
at reasonably low latency settings in JACK and has the added benefit of
mainline kernel support. If the multi-channel version works nearly as well
it may be a winner.
https://www.kickstarter.com/projects/1250664710/audio-injector-octo-surroun…
12 Jan
12 Jan
10:47 a.m.
On 01/12/2017 10:37 AM, michael noble wrote:
For those looking for high bit rate, non-usb, stable
multi-channel input
and output on the pi (6 in 8 out), this current Kickstarter may be of
interest. I'm not affiliated with the guy responsible for this , but I do
have his first board, the 2 in 2 out version. So far it seems very stable
at reasonably low latency settings in JACK and has the added benefit of
mainline kernel support. If the multi-channel version works nearly as well
it may be a winner.
https://www.kickstarter.com/projects/1250664710/audio-injector-octo-surroun…
Looks great but what always interests me first with these kind of
projects is what kind of audio codec they're using. This project doesn't
mention anything about that and even blurred the inscription on the
codec chip on the pictures. Do you happen to know what audio codec it is
using?
Best,
Jeremy
10:58 a.m.
I don't have any info on the multi-channel version. The 2/2 version appears
to be this: https://www.cirrus.com/en/pubs/proDatasheet/WM8731_v4.9.pdf
On Thu, Jan 12, 2017 at 6:47 PM, Jeremy Jongepier <jeremy(a)autostatic.com>
wrote:
On 01/12/2017 10:37 AM, michael noble wrote:
For those looking for high bit rate, non-usb,
stable multi-channel input
and output on the pi (6 in 8 out), this current Kickstarter may be of
interest. I'm not affiliated with the guy responsible for this , but I do
have his first board, the 2 in 2 out version. So far it seems very stable
at reasonably low latency settings in JACK and has the added benefit of
mainline kernel support. If the multi-channel version works nearly as
well
it may be a winner.
https://www.kickstarter.com/projects/1250664710/audio-
injector-octo-surround-sound-for-the-raspber
Looks great but what always interests me first with these kind of
projects is what kind of audio codec they're using. This project doesn't
mention anything about that and even blurred the inscription on the
codec chip on the pictures. Do you happen to know what audio codec it is
using?
Best,
Jeremy
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
11:03 a.m.
On Thu, 12 Jan 2017 10:47:26 +0100
Jeremy Jongepier <jeremy(a)autostatic.com> wrote:
On 01/12/2017 10:37 AM, michael noble wrote:
I didn't run the vid - not going to pick through a laundry list of 3rd party
scripts, and face book? No way! However, one concern would be that amount of
*unbalanced* I/O. I wonder how it would perform in a real-world situation.
Does anyone have experience of anything at all similar?
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
For those looking for high bit rate, non-usb,
stable multi-channel input
and output on the pi (6 in 8 out), this current Kickstarter may be of
interest. I'm not affiliated with the guy responsible for this , but I do
have his first board, the 2 in 2 out version. So far it seems very stable
at reasonably low latency settings in JACK and has the added benefit of
mainline kernel support. If the multi-channel version works nearly as well
it may be a winner.
https://www.kickstarter.com/projects/1250664710/audio-injector-octo-surroun…
Looks great but what always interests me first with these kind of
projects is what kind of audio codec they're using. This project doesn't
mention anything about that and even blurred the inscription on the
codec chip on the pictures. Do you happen to know what audio codec it is
using?
Best,
Jeremy
11:05 a.m.
I wouldn't bother with the video - its is quite frankly, pretty hard to get
through. However, he appears to be offering balanced breakout options...
On Thu, Jan 12, 2017 at 7:03 PM, Will Godfrey <willgodfrey(a)musically.me.uk>
wrote:
On Thu, 12 Jan 2017 10:47:26 +0100
Jeremy Jongepier <jeremy(a)autostatic.com> wrote:
On 01/12/2017 10:37 AM, michael noble wrote:
> For those looking for high bit rate, non-usb, stable multi-channel
input
> and output on the pi (6 in 8 out), this
current Kickstarter may be of
> interest. I'm not affiliated with the guy responsible for this , but I
do
> have his first board, the 2 in 2 out
version. So far it seems very
stable
> at reasonably low latency settings in JACK
and has the added benefit of
> mainline kernel support. If the multi-channel version works nearly as
well
> it may be a winner.
>
> https://www.kickstarter.com/projects/1250664710/audio-
injector-octo-surround-sound-for-the-raspber
Looks great but what always interests me first with these kind of
projects is what kind of audio codec they're using. This project doesn't
mention anything about that and even blurred the inscription on the
codec chip on the pictures. Do you happen to know what audio codec it is
using?
Best,
Jeremy
I didn't run the vid - not going to pick through a laundry list of 3rd
party
scripts, and face book? No way! However, one concern would be that amount
of
*unbalanced* I/O. I wonder how it would perform in a real-world situation.
Does anyone have experience of anything at all similar?
--
Will J Godfrey
http://www.musically.me.uk
Say you have a poem and I have a tune.
Exchange them and we can both have a poem, a tune, and a song.
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
2672
days inactive
2672
days old
linux-audio-user@lists.linuxaudio.org
4 comments
3 participants
participants (3)
-
Jeremy Jongepier -
michael noble -
Will Godfrey