31 Jan
2014
31 Jan
'14
5:05 p.m.
Already sent to the Rivendell users list several days ago but so far nobody
seems to be doing exactly this so I thought the wider linux audio community
might have some valuable insight.
Looking for ideas / thoughts / discussion / advice on:
a small box to put in remote locations.
it will:
have a tuner card(s) or an external radio(s)
record the input from the radio via rotter (other?)
send to an icecast instance for remote listening.
be low power and inexpensive.
Hopefully be able to handle more than one station on the same box.
Links for those who may not know of rotter or some of the other bits I want to
run.:
Rotter - http://www.aelius.com/njh/rotter/
Liquidsoap - http://savonet.sourceforge.net/
Darkice - http://code.google.com/p/darkice/
Icecast - http://www.icecast.org/
all the best,
drew
31 Jan
31 Jan
11:31 p.m.
On Fri, 31 Jan 2014, drew Roberts wrote:
Already sent to the Rivendell users list several days
ago but so far nobody
seems to be doing exactly this so I thought the wider linux audio community
might have some valuable insight.
Looking for ideas / thoughts / discussion / advice on:
a small box to put in remote locations.
it will:
have a tuner card(s) or an external radio(s)
record the input from the radio via rotter (other?)
send to an icecast instance for remote listening.
be low power and inexpensive.
Hopefully be able to handle more than one station on the same box.
So does this ask about both the box and hardware?
Hardware: Hardware depends on the audio IF. If The IF is pci(e) then you
need sort of a standard mother board. The lowest power ones I know are the
Intel Atom boards about 6 inches square, and seem to have good latency
performance at low power. There is one in particular that only needs 12v
in and figures the rest. but there are also atx power supplies that are
about as big as the atx power socket that only need 12v as well. If you
are willing to use USB audio IF (I don't know of any USB radio cards, and
the chances of getting more than one reciever on one card lies with pci(e)
cards).
Try
http://www.audioscience.com/internet/products/tuner_cards/tunercards.htm
Only problem is these will cost more than the rest of the system. Everyone
figures radio stations are a license to print money, and they want some.
Software: Question: are you wanting to monitor live audio from the
receivers or listen to the archives? Achive listening would be easiest
with an http server, just list the files and download what you want to
your favourite player. Live would be streaming and jack would do that best
as it could take the same audio going to rotter and stream it. WHat I
don't know is how well the streamers work with jack. I have only used IDJC
for that, but that is not really set up for remote operation so much as
live shows, so it would be overkill. Also it would want X and libs.
--
Len Ovens
www.ovenwerks.net
1 Feb
1 Feb
12:25 a.m.
On Fri, 31 Jan 2014 14:12:20 -0800 (PST) Len Ovens <len(a)ovenwerks.net>
wrote:
So does this ask about both the box and hardware?
Hardware: Hardware depends on the audio IF. If The IF is pci(e) then
you need sort of a standard mother board. The lowest power ones I
know are the Intel Atom boards about 6 inches square, and seem to
have good latency performance at low power. There is one in
particular that only needs 12v in and figures the rest. but there are
also atx power supplies that are about as big as the atx power socket
that only need 12v as well. If you are willing to use USB audio IF (I
don't know of any USB radio cards, and the chances of getting more
than one reciever on one card lies with pci(e) cards).
We do sell such small systems as part of our daily business. Our
expirience is that the extra converter-boards are often of very bad
quality and don't last long. If they work at all in combination that
the specific board. And if they provide enough power if its not only
the board but also an pci-card and an hdd...
Better use a board that has a 19V(!) input onboard. These fit a
traditional laptop psu and provide enough power for everything you want
to do. And you can buy a psu from a vendor with expirience in
psu-manufacturing for laptops, not from a vendor with expirience in
shipping a container of cheapest parts via the cheapest route...
Oh and then there is the whole Atom-graphics problem... better use a
celeron. More power, real intel graphics (with open-source drivers) and
a power-consumption only slightly more then an atom.
- Arnold
3951
days inactive
3951
days old
linux-audio-user@lists.linuxaudio.org
2 comments
3 participants
participants (3)
-
Arnold Krille -
drew Roberts -
Len Ovens