11 Oct
2012
11 Oct
'12
3:53 p.m.
Hello, All--
i'm curious. Can Bristol receive control-change messages? i've a midi
controller with eight faders and would love for them to control the drawbars on
Bristol's b3 gui. Any reading material would be greatly appreciated.
Thank you, much, for your help.
bill
11 Oct
11 Oct
4:35 p.m.
Hello Bill,
Bristol does support this (indeed, nearly anything that's on the GUI
is midi cc controllable, buttons, sliders, knobs etc).
To get it work, you just need to middle click on the drawbar on the
GUI, then move the physical fader on your controller and the
connection should be set.
With my M-audio oxygen 61 at least, it works flawlessly.
Andrew.
On Thu, Oct 11, 2012 at 2:53 PM, bill(a)wolfcomposer.com
<bill(a)wolfcomposer.com> wrote:
Hello, All--
i'm curious. Can Bristol receive control-change messages? i've a midi
controller with eight faders and would love for them to control the drawbars
on Bristol's b3 gui. Any reading material would be greatly appreciated.
Thank you, much, for your help.
bill
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user
4469
days inactive
4469
days old
linux-audio-user@lists.linuxaudio.org
1 comments
2 participants
participants (2)
-
Andrew C -
bill＠wolfcomposer.com