6 Nov
2007
6 Nov
'07
6:54 a.m.
Folks,
Loading a .wav file in Specimen, either produced by psindustrializer
or downloaded from Freesounds results in it being triggered by a single
C note of an external MIDI keyboard. Is it possible to spread a
sample across at least one octave ? I reckon that spreading can
affect sound quality negatively but in the case of industrial sounds
this can be considered an additional effect. It would be just great to
use a sample over several notes, like in Linux Sampler for instance.
Is there a way to do that with Specimen ?
Thanks,
Al
6 Nov
6 Nov
7:17 a.m.
Am Dienstag, 6. November 2007 schrieb lanas:
Folks,
Loading a .wav file in Specimen, either produced by psindustrializer
or downloaded from Freesounds results in it being triggered by a single
C note of an external MIDI keyboard. Is it possible to spread a
sample across at least one octave ? I reckon that spreading can
affect sound quality negatively but in the case of industrial sounds
this can be considered an additional effect. It would be just great to
use a sample over several notes, like in Linux Sampler for instance.
Is there a way to do that with Specimen ?
That's a basic function for a software sampler i'd say. See the "ruler"
area
above the virtual keyboard, where a small yellow square marks the original
key? left of this square, use left mousebutton to define the lower limit of
your mapping zone, right of it do the same for upper limit with right
mousebutton. It seems it's not possible to use a keyboard range completely
outside the original key...
Thanks,
Al
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user(a)lists.linuxaudio.org
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-user
11:11 a.m.
Le Tue, 6 Nov 2007 12:17:39 +0100,
Edgar Aichinger <edogawa(a)aon.at> a écrit :
Am Dienstag, 6. November 2007 schrieb lanas:
That's a basic function for a software sampler
i'd say. See the
"ruler" area above the virtual keyboard, where a small yellow square
marks the original key? left of this square, use left mousebutton to
define the lower limit of your mapping zone, right of it do the same
for upper limit with right mousebutton. It seems it's not possible to
use a keyboard range completely outside the original key...
Works fine, thanks !
Tschüß,
Al
12:58 p.m.
On Tuesday 06 November 2007, lanas wrote:
Le Tue, 6 Nov 2007 12:17:39 +0100,
Edgar Aichinger <edogawa(a)aon.at> a écrit :
also if you have lots of samples, you can try my wav2specimen script [see my
website in signature] to generate banks out of .wav files..
Flo
--
Palimm Palimm!
http://tapas.affenbande.org
Am Dienstag, 6. November 2007 schrieb lanas:
That's a basic function for a software sampler i'd say. See the
"ruler" area above the virtual keyboard, where a small yellow square
marks the original key? left of this square, use left mousebutton to
define the lower limit of your mapping zone, right of it do the same
for upper limit with right mousebutton. It seems it's not possible to
use a keyboard range completely outside the original key...
Works fine, thanks !
6229
days inactive
6229
days old
linux-audio-user@lists.linuxaudio.org
3 comments
3 participants
participants (3)
-
Edgar Aichinger -
Florian Schmidt -
lanas