13 Oct
2002
13 Oct
'02
6:29 p.m.
[sorry, earlier message fried...]
OK, here is a patch to fix that... new sourceforge file release is on its
way soon.
cd freqtweak-0.4
patch -p0 < /path/to/portsel.diff jlc
On Sun, 13 Oct 2002, Reiner Klenk wrote:
On Sun, 13 Oct 2002, Jesse Chappell wrote:
-fmove-all-movables
Announcing the initial release of FreqTweak
(v0.4)
http://freqtweak.sourceforge.net
Hello, I get the following:
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include
-I/usr/lib/wx/include/gtk-2.2 -DGTK_NO_CHECK_CASTS -D__WXGTK__
-D_REENTRANT -DNEWWX -I/usr/local/include -g -Wall -O3
-fomit-frame-pointer -fstrength-reduce -funroll-loops -ffast-math -mcpu=i686 -march=i686 -c
FTportSelectionDialog.cpp
FTportSelectionDialog.cpp: In method `void
FTportSelectionDialog::update ()':
FTportSelectionDialog.cpp:118: no matching function for call to
`wxListBox::DeselectAll ()'
FTportSelectionDialog.cpp: In method `void
FTportSelectionDialog::OnDeselectAll (wxCommandEvent &)':
FTportSelectionDialog.cpp:156: no matching function for call to
`wxListBox::DeselectAll ()'
wx is 2.2.9
Regards,
Reiner
13 Oct
13 Oct
7:31 p.m.
OK... that patch doesn't help at all.... ignore it.
Terribly careless of me :)
Release 0.4.2 should be up on sourceforge now... try that one.
jlc
[sorry, earlier message fried...]
OK, here is a patch to fix that... new sourceforge file release is on its way
soon.
cd freqtweak-0.4
patch -p0 < /path/to/portsel.diff jlc
On Sun, 13 Oct 2002, Reiner Klenk wrote:
On Sun, 13 Oct 2002, Jesse Chappell wrote:
-fmove-all-movables
> -ffast-math -mcpu=i686 -march=i686 -c FTportSelectionDialog.cpp
> FTportSelectionDialog.cpp: In method `void
> FTportSelectionDialog::update ()':
> FTportSelectionDialog.cpp:118: no matching function for call to
> `wxListBox::DeselectAll ()'
> FTportSelectionDialog.cpp: In method `void
> FTportSelectionDialog::OnDeselectAll (wxCommandEvent &)':
> FTportSelectionDialog.cpp:156: no matching function for call to
> `wxListBox::DeselectAll ()'
>
> wx is 2.2.9 Announcing the initial release of FreqTweak
(v0.4)
http://freqtweak.sourceforge.net
Hello, I get the following:
g++ -DHAVE_CONFIG_H -I. -I. -I.. -I/usr/local/include
-I/usr/lib/wx/include/gtk-2.2 -DGTK_NO_CHECK_CASTS -D__WXGTK__
-D_REENTRANT -DNEWWX -I/usr/local/include -g -Wall -O3
-fomit-frame-pointer -fstrength-reduce -funroll-loops 
10:17 p.m.
Hi Jesse -
"configure" doesn't seem to find my fftw install (in
/usr/local/) no matter how I prefix it. I have fftw
installed as single-precision (On fftw compile, did
"./configure --enable-float --enable-type-prefix"):
# ./configure
blah, blah, blah...
checking for fftw_create_plan in -lsfftw... no
checking for rfftw_create_plan in -lsrfftw... no
checking for rfftw_create_plan in -lsrfftw... (cached)
no
checking for rfftw_create_plan in -lfftw... no
checking for rfftw_create_plan in -lrfftw... no
checking for rfftw_create_plan in -lrfftw... (cached)
no
configure: error: "Could not find FFTW! Is it
installed (www.fftw.org)?"
# ls /usr/local/include/*fft*
/usr/local/include/fftw.h /usr/local/include/sfftw.h
/usr/local/include/rfftw.h
/usr/local/include/srfftw.h
This app looks very cool and I'd love to try it out.
Any help would be appreciated.
Kevin
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com
10:45 p.m.
"configure" doesn't seem to find my fftw install (in
/usr/local/) no matter how I prefix it. I have fftw
installed as single-precision (On fftw compile, did
"./configure --enable-float --enable-type-prefix"):
Try this (if you are using bash, it not prepend with 'bash'):
CPPFLAGS="-I/usr/local/include" LDFLAGS="-L/usr/local/lib"
./configure
I will try to clean up the autoconf stuff to work better... but it is odd that
it didn't work for you because my fftw is in /usr/local as well.
jlc
11:23 p.m.
Thanks Jesse -
I still get the same, but it may indeed be my problem.
I'll have some time to play again tomorrow, recheck
my fftw stuff, paths, etc.
Thanks for the quick reply.
Best,
Kevin
--- Jesse Chappell <jesse(a)essej.net> wrote:
Try this (if you are using bash, it not prepend with
'bash'):
CPPFLAGS="-I/usr/local/include"
LDFLAGS="-L/usr/local/lib" ./configure
I will try to clean up the autoconf stuff to work
better... but it is odd that
it didn't work for you because my fftw is in
/usr/local as well.
jlc
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com
"configure" doesn't seem to find my fftw install
(in
/usr/local/) no matter how I prefix it. I have
fftw
installed as single-precision (On fftw compile,
did
"./configure --enable-float
--enable-type-prefix"):
11:37 p.m.
kevin ernste is on permanent record as saying:
:Thanks Jesse -
:
:I still get the same, but it may indeed be my problem.
: I'll have some time to play again tomorrow, recheck
:my fftw stuff, paths, etc.
Did you look at the logfile that configure generated? Sometimes the test
will fail for a completely different reason than you'd expect.
Greg
--- -
14 Oct
14 Oct
9:05 a.m.
New subject: [linux-audio-user] Announcing initial release of FreqTweak
el Sun, 13 Oct 2002 17:15:02 -0700 (PDT)
kevin ernste <kevinernste(a)yahoo.com> escribió:
configure: error: "Could not find FFTW! Is it
installed (www.fftw.org)?"
how did you install fftw? first i built from sources (fftw 2.1.3 from
www.fftw.org) and i got the same message. i was about to write to the list
when i realized that the package installed only this:
/usr/local/include/fftw.h
/usr/local/include/rfftw.h
/usr/local/info/fftw.info
/usr/local/info/fftw.info-1
/usr/local/info/fftw.info-2
/usr/local/info/fftw.info-3
/usr/local/info/fftw.info-4
/usr/local/info/fftw.info-5
/usr/local/lib/libfftw.a
/usr/local/lib/libfftw.la
/usr/local/lib/librfftw.a
/usr/local/lib/librfftw.la
so i decided to try the precompiled rpms. i downloaded and installed both
fftw-2.1.3-1.i386.rpm and fftw-2.1.3-devel-1.i386.rpm, and then everything
went fine (i deleted the sources directory and untared afresh).
good luck,
lj
11:02 a.m.
New subject: [linux-audio-user] Announcing initial release of FreqTweak
On Mon, 14 Oct 2002 08:02:19 -0300
luis jure <luisjure(a)multitel.com.uy> wrote:
el Sun, 13 Oct 2002 17:15:02 -0700 (PDT)
kevin ernste <kevinernste(a)yahoo.com> escribió:
I didn't catch the start of this thread, so I may be talking through the
top of my head.
On "gotcha" with fftw is on SuSE systems where then is (IIRC) libdfftw.so
and libsfftw.so for double and single precision respectively. For an
example of how to work around it in the configure stage have a look at gwc
(htpp://gwc.sourceforge.net).
James
--
James Tappin, O__ "I forget the punishment for using
james(a)tappin.me.uk -- \/` Microsoft --- Something lingering
http://www.tappin.me.uk/ with data loss in it I fancy"
configure: error: "Could not find FFTW! Is
it
installed (www.fftw.org)?"
how did you install fftw? first i built from sources (fftw 2.1.3 from
www.fftw.org) and i got the same message. i was about to write to the
list when i realized that the package installed only this:
/usr/local/include/fftw.h
/usr/local/include/rfftw.h
/usr/local/info/fftw.info
/usr/local/info/fftw.info-1
/usr/local/info/fftw.info-2
/usr/local/info/fftw.info-3
/usr/local/info/fftw.info-4
/usr/local/info/fftw.info-5
/usr/local/lib/libfftw.a
/usr/local/lib/libfftw.la
/usr/local/lib/librfftw.a
/usr/local/lib/librfftw.la
so i decided to try the precompiled rpms. i downloaded and installed
both fftw-2.1.3-1.i386.rpm and fftw-2.1.3-devel-1.i386.rpm, and then
everything went fine (i deleted the sources directory and untared
afresh).
6:21 p.m.
New subject: [linux-audio-user] Announcing initial release of FreqTweak
I installed fftw for BOTH double and single precision
(I need double for something else), so:
# For single
./configure --enable-float --enable-type-prefix
make
make install
# Then for double
make clean
./configure --enable-type-prefix
make
make install
This gives you sfftw.h and dfftw,h, as well as the
usual fftw.h, rfftw.h, etc that you got without any
config flags.
Best,
Kevin
--- luis jure <luisjure(a)multitel.com.uy> wrote:
el Sun, 13 Oct 2002 17:15:02 -0700 (PDT)
kevin ernste <kevinernste(a)yahoo.com> escribi�:
__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com
configure: error: "Could not find FFTW! Is
it
installed (www.fftw.org)?"
how did you install fftw? first i built from sources
(fftw 2.1.3 from
www.fftw.org) and i got the same message. i was
about to write to the list
when i realized that the package installed only
this:
/usr/local/include/fftw.h
/usr/local/include/rfftw.h
/usr/local/info/fftw.info
/usr/local/info/fftw.info-1
/usr/local/info/fftw.info-2
/usr/local/info/fftw.info-3
/usr/local/info/fftw.info-4
/usr/local/info/fftw.info-5
/usr/local/lib/libfftw.a
/usr/local/lib/libfftw.la
/usr/local/lib/librfftw.a
/usr/local/lib/librfftw.la
so i decided to try the precompiled rpms. i
downloaded and installed both
fftw-2.1.3-1.i386.rpm and
fftw-2.1.3-devel-1.i386.rpm, and then everything
went fine (i deleted the sources directory and
untared afresh).
good luck,
lj
8119
days inactive
8120
days old
linux-audio-user@lists.linuxaudio.org
8 comments
5 participants
participants (5)
-
G. M. Bodnar -
James Tappin -
Jesse Chappell -
kevin ernste -
luis jure