17 Dec
2014
17 Dec
'14
12:02 a.m.
Hey hey,
I have two M-Audio Delta 1010 soundcards. Currently my driver is built into
the kernel. Can I rely on the two cards not being swapped after reboots or can
I fix it, even though the driver is built into the kernel?
A pointer to meaningful documentation on that point will suffice. Thank you!
Ta-ta
----
Ffanci
* Internet: https://freeshell.de/~silvain
Twitter: http://twitter.com/ffanci_silvain
17 Dec
17 Dec
6:10 a.m.
On 17/12/14 at 01:02am, F. Silvain wrote:
Hey hey,
I have two M-Audio Delta 1010 soundcards. Currently my driver is built into
the kernel. Can I rely on the two cards not being swapped after reboots or
can I fix it, even though the driver is built into the kernel?
A pointer to meaningful documentation on that point will suffice. Thank you!
http://alsa.opensrc.org/MultipleCards
--
«My mama said
to get things done
You'd better not mess
with Major Tom»
D.Bowie
12:54 p.m.
On Wed, 17 Dec 2014 01:02:18 +0100 (CET)
"F. Silvain" <silvain(a)freeshell.de> wrote:
Hey hey,
I have two M-Audio Delta 1010 soundcards. Currently my driver is built into
the kernel. Can I rely on the two cards not being swapped after reboots or can
I fix it, even though the driver is built into the kernel?
I haven't run 2 Deltas in a while, but I didn't have a problem with them
switching identifiers unless I was changing hardware on the system. The Deltas
can be connecded via their SPDIF ports to be in sync with each other; check
out http://www.jrigg.co.uk/linuxaudio/ice1712multi.html and
http://delta.brainiac.com/deltasync.html if you are interested in that.
--
======================================================================
Joe Hartley - UNIX/network Consultant - jh(a)brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa
1:01 p.m.
Thanks the two of you! From the ALSA article on multiple soundcards and
additional material from that point I figured everything out, that I needed.
I have read the guide by John Rigg, which was very helpful and the reason for
getting the second Delta.
Ta-ta
----
Ffanci
* Internet: https://freeshell.de/~silvain
Twitter: http://twitter.com/ffanci_silvain
1:16 p.m.
On my machine the order after startup is always the same.
[rocketmouse@archlinux ~]$ cat /etc/modprobe.d/alsa-base.conf
# ALSA module ordering
options snd slots=snd_hdspm,snd_ice1712,snd_ice1712
[rocketmouse@archlinux ~]$ service rtirq status | grep ice
213 FF 80 - 120 0.0 S irq/20-snd_ice1
214 FF 79 - 119 0.0 S irq/21-snd_ice1
I suspect they are sorted by the IRQ at startup.
There's still an issue, it's not possible to automatically restore the
MIDI connections, since both cards have got the same MIDI name and when
using udev for unique names, only the audio names are changed.
18 Dec
18 Dec
8:16 a.m.
F. Silvain wrote:
I have two M-Audio Delta 1010 soundcards. Currently my
driver is built
into the kernel. Can I rely on the two cards not being swapped after
reboots or can I fix it, even though the driver is built into the
kernel?
There have been attempts to probe PCI devices in parallel, but this
always broke too many things. The order of PCI devices should always
be consistent.
Regards,
Clemens
3421
days inactive
3422
days old
linux-audio-user@lists.linuxaudio.org
5 comments
5 participants
participants (5)
-
Clemens Ladisch -
F. Silvain -
Joe Hartley -
Raffaele Morelli -
Ralf Mardorf