Hi everybody! Can somebody help me with my MIDI setup? I fiddled a little bit with it but couldn't get it work. I'm using a Terratec EWS64 XL, I've installed it's driver (sam9407), so the audio section works. But what do I have to do for being able to use it's MIDI ports? At the moment I'm using KDE 2.2 and maybe want to use Muse or something like that, because it's very similar to Cubase. Do I have to add a raw device to artsd or directly to Muse? Sorry for this stupid question, but I haven't found a HOWTO about that and I already tried something with Muse but it terminated after the first MIDI Event occured. Thanks for any help! Christian Schoenebeck P.S. these are my available sequencer devices: crw-rw---- 1 root audio 14, 1 15. Apr 2001 /dev/oss_sequencer crw-rw---- 1 root audio 145, 1 6. Sep 22:53 /dev/sam0_sequencer crw-rw---- 1 root audio 145, 65 6. Sep 22:53 /dev/sam1_sequencer crw-rw---- 1 root audio 145, 129 6. Sep 22:53 /dev/sam2_sequencer crw-rw---- 1 root audio 145, 193 6. Sep 22:53 /dev/sam3_sequencer lrwxrwxrwx 1 root root 14 6. Sep 22:53 /dev/sequencer -> sam0_sequencer lrwxrwxrwx 1 root root 10 6. Sep 22:53 /dev/sequencer2 -> sam0_music